PHILIPS BGE788C

BGE788C
750 MHz, 34 dB gain push-pull amplifier
Rev. 01 — 1 April 2005
Product data sheet
1. Product profile
1.1 General description
Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in
a SOT115J package. The module consists of two cascaded stages both in cascode
configuration.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
MSC895
1.2 Features
■
■
■
■
Excellent linearity
Extremely low noise
High gain
Excellent return loss properties
1.3 Applications
■ Single module line extender in CATV systems operating in the 40 MHz to 750 MHz
frequency range.
1.4 Quick reference data
Table 1:
Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
f = 50 MHz
33.2
-
35.2
dB
Itot
total current consumption
f = 750 MHz
[1]
VB = 24 V
[1]
33.5
-
-
dB
285
-
325
mA
The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
2. Pinning information
Table 2:
Pinning
Pin
Description
1
input
2
common
3
common
5
+VB
7
common
8
common
9
output
Simplified outline
Symbol
5
1 3 5 7 9
1
9
2 3 7 8
sym095
3. Ordering information
Table 3:
Ordering information
Type number
BGE788C
Package
Name
Description
Version
-
rectangular single-ended package; aluminium flange;
2 vertical mounting holes; 2 × 6-32 UNC and 2 extra
horizontal mounting holes; 7 gold-plated in-line leads
SOT115J
4. Limiting values
Table 4:
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VB
Vi
Conditions
Min
Max
Unit
supply voltage
-
25
V
RF input voltage
-
55
dBmV
Tstg
storage temperature
−40
+100
°C
Tmb
mounting base temperature
−20
+100
°C
9397 750 14607
Product data sheet
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Rev. 01 — 1 April 2005
2 of 7
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
5. Characteristics
Table 5:
Characteristics
Bandwidth 40 MHz to 750 MHz; VB = 24 V; Tmb = 30 °C; ZS = ZL = 75 Ω.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
f = 50 MHz
33.2
-
35.2
dB
f = 750 MHz
33.5
-
-
dB
SL
slope cable equivalent
f = 40 MHz to 750 MHz
0.3
-
2.3
dB
FL
flatness of frequency response
f = 40 MHz to 750 MHz
-
-
±0.6
dB
|s11|2
input return losses
f = 40 MHz to 320 MHz
16
-
-
dB
f = 320 MHz to 640 MHz
15
-
-
dB
f = 640 MHz to 750 MHz
14
-
-
dB
f = 40 MHz to 320 MHz
16
-
-
dB
f = 320 MHz to 640 MHz
15
-
-
dB
|s22|2
output return losses
f = 640 MHz to 750 MHz
14
-
-
dB
ϕs21
phase response
f = 50 MHz
135
-
225
deg
CTB
composite triple beat
110 channels flat;
Vo = 44 dBmV;
measured at 745.25 MHz
-
-
−49
dB
CSO
composite second order
distortion
110 channels flat;
Vo = 44 dBmV;
measured at 746.5 MHz
-
-
−52
dB
NF
noise figure
f = 50 MHz
Itot
total current consumption
[1]
[1]
-
-
8
dB
285
-
325
mA
The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
9397 750 14607
Product data sheet
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Rev. 01 — 1 April 2005
3 of 7
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
6. Package outline
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads
SOT115J
D
E
Z
p
A2
1
2
3
5
7
8
9
A
L
F
S
W
c
e
b
w M
e1
d
U2
q2
Q
B
y M B
q1
x M B
y M B
p
U1
q
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A2
A
max. max.
mm 20.8
9.1
OUTLINE
VERSION
b
c
d
D
E
max. max. max.
e
e1
F
L
min.
p
4.15
0.51
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8
3.85
0.38
Q
max.
q
JEDEC
q2
S
U1
U2
W
w
x
2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7
44.25 7.8 UNC
REFERENCES
IEC
q1
JEITA
EUROPEAN
PROJECTION
y
Z
max.
0.1
3.8
ISSUE DATE
99-02-06
04-02-04
SOT115J
Fig 1. Package outline SOT115J
9397 750 14607
Product data sheet
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Rev. 01 — 1 April 2005
4 of 7
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
7. Revision history
Table 6:
Revision history
Document ID
Release date
Data sheet status
Change notice
Doc. number
Supersedes
BGE788C_1
20050401
Product data sheet
-
9397 750 14607
-
9397 750 14607
Product data sheet
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Rev. 01 — 1 April 2005
5 of 7
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
8. Data sheet status
Level
Data sheet status [1]
Product status [2] [3]
Definition
I
Objective data
Development
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1]
Please consult the most recently issued data sheet before initiating or completing a design.
[2]
The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3]
For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
9. Definitions
10. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
11. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
9397 750 14607
Product data sheet
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Rev. 01 — 1 April 2005
6 of 7
BGE788C
Philips Semiconductors
750 MHz, 34 dB gain push-pull amplifier
12. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description. . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick reference data. . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
2
2
2
3
4
5
6
6
6
6
© Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 1 April 2005
Document number: 9397 750 14607
Published in The Netherlands