PBLS4002Y; PBLS4002V 40 V PNP BISS loadswitch Rev. 01 — 6 December 2004 Product data sheet 1. Product profile 1.1 General description Low VCEsat PNP transistor and NPN resistor-equipped transistor in one package. Table 1: Product overview Type number Package Philips JEITA PBLS4002Y SOT363 SC-88 PBLS4002V SOT666 - 1.2 Features ■ ■ ■ ■ ■ Low VCEsat (BISS) and resistor-equipped transistor in one package Low ‘threshold’ voltage (< 1 V) compared to MOSFET Low drive power required Space-saving solution Reduction of component count. 1.3 Applications ■ ■ ■ ■ Supply line switches Battery charger switches High-side switches for LEDs, drivers and backlights Portable equipment. 1.4 Quick reference data Table 2: Symbol Quick reference data Parameter Conditions Min Typ Max Unit open base - - −40 V - - −500 mA IC = −500 mA; IB = −50 mA - 440 700 mΩ open base - - 50 V TR1; PNP: low VCEsat transistor VCEO collector-emitter voltage IC collector-current (DC) RCEsat equivalent on-resistance TR2; NPN: resistor-equipped transistor VCEO collector-emitter voltage PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch Table 2: Quick reference data …continued Symbol Parameter Min Typ Max Unit IO output current (DC) Conditions - - 100 mA R1 bias resistor 1 (input) 3.3 4.7 6.1 kΩ R2/R1 bias resistor ratio 0.8 1 1.2 2. Pinning information Table 3: Discrete pinning Pin Description 1 emitter TR1 2 base TR1 3 output (collector) TR2 4 GND (emitter) TR2 5 input (base) TR2 6 Simplified outline 6 5 Symbol 6 4 5 R1 4 R2 TR2 1 collector TR1 2 TR1 3 001aab555 1 2 3 sym036 3. Ordering information Table 4: Ordering information Type number Package Name Description Version PBLS4002Y SC-88 plastic surface mounted package; 6 leads SOT363 PBLS4002V - plastic surface mounted package; 6 leads SOT666 4. Marking Table 5: Marking codes Type number Marking code [1] PBLS4002Y S2* PBLS4002V K2 [1] * = -: made in Hong Kong. * = t: made in Malaysia. * = W: made in China. 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 2 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit TR1; PNP: low VCEsat transistor VCBO collector-base voltage open emitter - −40 V VCEO collector-emitter voltage open base - −40 V VEBO emitter-base voltage open collector - −6 V IC collector current (DC) - −500 mA - −1 A - −50 mA - −100 mA - 200 mW tp ≤ 1 ms; δ = 0.02 ICM peak collector current IB base current (DC) IBM peak base current tp ≤ 1 ms; δ = 0.02 total power dissipation Tamb ≤ 25 °C Ptot [1] TR2; NPN: resistor-equipped transistor VCBO collector-base voltage open emitter - 50 V VCEO collector-emitter voltage open base - 50 V VEBO emitter-base voltage open collector - 10 V VI input voltage positive - +30 V negative - −10 V - 100 mA IO output current (DC) ICM peak collector current Ptot total power dissipation Tamb ≤ 25 °C [1] - 100 mA - 200 mW mW Per device Ptot total power dissipation - 300 Tstg storage temperature −65 +150 °C Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C [1] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated and standard footprint. 6. Thermal characteristics Table 7: Symbol Thermal characteristics Parameter Conditions thermal resistance from junction to ambient in free air Min Typ Max Unit Per device Rth(j-a) SOT363 [1] - - 416 K/W SOT666 [1] [2] - - 416 K/W [1] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 3 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 7. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit TR1; PNP: low VCEsat transistor ICBO collector-base cut-off current IEBO emitter-base cut-off current hFE DC current gain VCEsat collector-emitter saturation voltage VCB = −40 V; IE = 0 A - - −100 nA VCB = −40 V; IE = 0 A; Tj = 150 °C - - −50 µA VEB = −5 V; IC = 0 A - - −100 nA VCE = −2 V; IC = −10 mA 200 - - VCE = −2 V; IC = −100 mA [1] 150 - - VCE = −2 V; IC = −500 mA [1] 40 - - IC = −10 mA; IB = −0.5 mA - - −50 mV IC = −100 mA; IB = −5 mA - - −130 mV IC = −200 mA; IB = −10 mA - - −200 mV IC = −500 mA; IB = −50 mA [1] - - −350 mV - 440 700 mΩ RCEsat equivalent on-resistance IC = −500 mA; IB = −50 mA [1] VBEsat base-emitter saturation voltage IC = −500 mA; IB = −50 mA [1] - - −1.2 V VBEon base-emitter turn-on voltage VCE = −2 V; IC = −100 mA [1] - - −1.1 V fT transition frequency IC = −100 mA; VCE = −5 V; f = 100 MHz 100 300 - MHz Cc collector capacitance VCB = −10 V; IE = ie = 0 A; f = 1 MHz - - 10 pF TR2; NPN: resistor-equipped transistor ICBO collector-base cut-off current VCB = 50 V; IE = 0 A - - 100 nA ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 A - - 1 µA VCE = 30 V; IB = 0 A; Tj = 150 °C - - 50 µA IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A - - 900 µA hFE DC current gain VCE = 5 V; IC = 10 mA 30 - - VCEsat collector-emitter saturation voltage IC = 10 mA; IB = 0.5 mA - - 150 mV VI(off) off-state input voltage VCE = 5 V; IC = 100 µA - 1.1 0.5 V VI(on) on-state input voltage VCE = 0.3 V; IC = 20 mA 2.5 1.9 - V R1 bias resistor 1 (input) 3.3 4.7 6.1 kΩ R2/R1 bias resistor ratio 0.8 1 1.2 Cc collector capacitance - - 2.5 [1] VCB = 10 V; IE = ie = 0 A; f = 1 MHz pF Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 4 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 006aaa050 800 hFE 006aaa051 −103 (1) VCEsat (mV) 600 (2) 400 (1) −102 (3) 200 (2) (3) 0 −10−1 −1 −10 −102 −103 −10 −10−1 −1 −10 −102 IC (mA) −103 IC (mA) VCE = −2 V. IC/IB = 20. (1) Tamb = 150 °C. (1) Tamb = 150 °C. (2) Tamb = 25 °C. (2) Tamb = 25 °C. (3) Tamb = −55 °C. (3) Tamb = −55 °C. Fig 1. TR1 (PNP): DC current gain as a function of collector current; typical values. 006aaa052 −1200 VBE (mV) Fig 2. TR1 (PNP): Collector-emitter saturation voltage as a function of collector current; typical values. 006aaa053 −1200 VBEsat (mV) −1000 (1) −800 (2) −800 (3) −600 (1) (2) −400 (3) −400 0 −10−1 −1 −10 −102 −103 −200 −10−1 −1 VCE = −2 V. −102 −103 IC/IB = 20. (1) Tamb = −55 °C. (1) Tamb = 150 °C. (2) Tamb = 25 °C. (2) Tamb = 25 °C. (3) Tamb = 150 °C. (3) Tamb = −55 °C. Fig 3. TR1 (PNP): Base-emitter voltage as a function of collector current; typical values. Fig 4. TR1 (PNP): Base-emitter saturation voltage as a function of collector current; typical values. 9397 750 13455 Product data sheet −10 IC (mA) IC (mA) © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 5 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 006aaa054 −1200 (1) (2) (3) (4) (5) (6) IC (mA) 006aaa055 103 RCEsat (Ω) 102 −800 (1) (7) (8) (9) 10 (10) (2) (3) −400 1 0 0 −1 −2 −3 −4 −5 VCE (V) Tamb = 25 °C. 10−1 −10−1 −1 −10 −102 −103 IC (mA) IC/IB = 20. (1) IB = −40 mA (1) Tamb = −55 °C. (2) IB = −36 mA (2) Tamb = 25 °C. (3) IB = −32 mA (3) Tamb = 150 °C. (4) IB = −28 mA (5) IB = −24 mA (6) IB = −20 mA (7) IB = −16 mA (8) IB = −12 mA (9) IB = −8 mA (10) IB = −4 mA. Fig 5. TR1 (PNP): Collector current as a function of collector-emitter voltage; typical values. Fig 6. TR1 (PNP): Equivalent on-resistance as a function of collector current; typical values. 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 6 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 006aaa072 −10 006aaa073 103 RCEsat (Ω) VCEsat (V) 102 −1 10 (1) −10−1 (2) (1) (3) 1 (2) (3) −10−2 −10−1 −1 −10 −102 −103 10−1 −10−1 −1 IC (mA) Tamb = 25 °C. −102 −103 IC (mA) Tamb = 25 °C. (1) IC/IB = 10. (1) IC/IB = 10. (2) IC/IB = 50. (2) IC/IB = 50. (3) IC/IB = 100. (3) IC/IB = 100. Fig 7. TR1 (PNP): Collector-emitter saturation voltage as a function of collector current; typical values. Fig 8. TR1 (PNP): Equivalent-on resistance as a function of collector current; typical values. 9397 750 13455 Product data sheet −10 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 7 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 006aaa030 103 hFE (1) (2) (3) 006aaa031 1 VCEsat (V) 102 (1) (2) (3) 10−1 10 1 10−1 1 102 10 10−2 1 102 10 IC (mA) IC (mA) VCE = 5 V. IC/IB = 20. (1) Tamb = 150 °C. (1) Tamb = 100 °C. (2) Tamb = 25 °C. (2) Tamb = 25 °C. (3) Tamb = −40 °C. (3) Tamb = −40 °C. Fig 9. TR2 (NPN): DC current gain as a function of collector current; typical values. 006aaa032 10 Fig 10. TR2 (NPN): Collector-emitter saturation voltage as a function of collector current; typical values. 006aaa033 10 VI(off) (V) VI(on) (V) (1) (1) 1 (2) 1 (3) 10−1 10−1 (2) (3) 1 102 10 10−1 10−2 10−1 IC (mA) 10 IC (mA) VCE = 0.3 V. VCE = 5 V. (1) Tamb = −40 °C. (1) Tamb = −40 °C. (2) Tamb = 25 °C. (2) Tamb = 25 °C. (3) Tamb = 100 °C. (3) Tamb = 100 °C. Fig 11. TR2 (NPN): On-state input voltage as a function of collector current; typical values. Fig 12. TR2 (NPN): Off-state input voltage as a function of collector current; typical values. 9397 750 13455 Product data sheet 1 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 8 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 8. Package outline Plastic surface mounted package; 6 leads SOT363 D E B y X A HE 6 5 v M A 4 Q pin 1 index A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC SOT363 JEDEC JEITA SC-88 EUROPEAN PROJECTION ISSUE DATE 97-02-28 04-11-08 Fig 13. Package outline SOT363 (SC-88). 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 9 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch Plastic surface mounted package; 6 leads SOT666 D E A X Y S S HE 6 5 4 pin 1 index A 1 2 e1 c 3 bp w M A Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E e e1 HE Lp w y mm 0.6 0.5 0.27 0.17 0.18 0.08 1.7 1.5 1.3 1.1 1.0 0.5 1.7 1.5 0.3 0.1 0.1 0.1 OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 01-08-27 04-11-08 SOT666 Fig 14. Package outline SOT666. 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 10 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number PBLS4002Y PBLS4002V Package SOT363 SOT666 Description 3000 4000 10000 4 mm pitch, 8 mm tape and reel; T1 [2] -115 - -135 4 mm pitch, 8 mm tape and reel; T2 [3] -125 - -165 - -115 - 4 mm pitch, 8 mm tape and reel [1] For further information and the availability of packing methods, see Section 14. [2] T1: normal taping. [3] T2: reverse taping. 9397 750 13455 Product data sheet Packing quantity © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 11 of 14 Philips Semiconductors PBLS4002Y; PBLS4002V 40 V PNP BISS loadswitch 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PBLS4002Y_PBLS4002V_1 20041206 - Product data sheet - 9397 750 13455 Product data sheet 9397 750 13455 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 12 of 14 PBLS4002Y; PBLS4002V Philips Semiconductors 40 V PNP BISS loadswitch 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions 13. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13455 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 6 December 2004 13 of 14 Philips Semiconductors PBLS4002Y; PBLS4002V 40 V PNP BISS loadswitch 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packing information. . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information . . . . . . . . . . . . . . . . . . . . 13 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 6 December 2004 Document order number: 9397 750 13455 Published in The Netherlands