PHILIPS 74ALVT16652DL

INTEGRATED CIRCUITS
74ALVT16652
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
Product specification
Supersedes data of 1996 Aug 13
IC23 Data Handbook
1998 Feb 13
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
FEATURES
74ALVT16652
DESCRIPTION
• 16–bit bus interface
• 5V I/O Compatible
• 3-State buffers
• Output capability: +64mA/-32mA
• TTL input and output switching levels
• Input and output interface capability to systems at 5V supply
• Bus-hold data inputs eliminate the need for external pull-up
The 74ALVT16652 is a high-performance BiCMOS product
designed for VCC operation at 2.5V or 3.3V with I/O compatibility up
to 5V. The device can be used as two 8-bit transceivers or one
16-bit transceiver.
Complimentary output-enable (OEAB and OEBA) inputs are
provided to control the transceiver functions. Select-control (SAB
and SBA) inputs are provided to select whether real-time or stored
data is transferred. A Low-input level selects real-time data, and a
High input level selects stored data. The circuitry used for select
control eliminates the typical decoding glitch that occurs in a
multiplexer during the transition between stored and real-time data.
resistors to hold unused inputs
• Live insertion/extraction permitted
• Power-up reset
• Power-up 3-State
• No bus current loading when output is tied to 5V bus
• Latch-up protection exceeds 500mA per JEDEC JC40.2 Std 17
• ESD protection exceeds 2000V per MIL STD 883 Method 3015
Data on the A or B bus, or both, can be stored in the internal
flip-flops by Low-to-High transitions at the appropriate clock (CPAB
or CPBA) inputs regardless of the levels on the select-control or
output-enable inputs. When SAB and SBA are in real-time transfer
mode, it is possible to store data without using the internal D-type
flip-flops by simultaneously enabling OEAB and OEBA. In this
configuration, each output reinforces its input. Thus, when all other
data sources to the two sets of bus lines are at high impedance,
each set of bus lines remains at its last level configuration.
and 200V per Machine Model
QUICK REFERENCE DATA
SYMBOL
TYPICAL
CONDITIONS
Tamb = 25°C
PARAMETER
tPLH
tPHL
Propagation delay
nAx to nBx or nBx to nAx
CL = 50pF
UNIT
2.5V
3.3V
2.0
2.1
1.5
1.6
ns
pF
CIN
Input capacitance DIR, OE
VI = 0V or VCC
3
3
CI/O
I/O pin capacitance
VI/O = 0V or VCC
9
9
pF
ICCZ
Total supply current
Outputs disabled
40
70
µA
ORDERING INFORMATION
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
DWG NUMBER
56-Pin Plastic SSOP Type III
PACKAGES
–40°C to +85°C
74ALVT16652 DL
AV16652 DL
SOT371-1
56-Pin Plastic TSSOP Type II
–40°C to +85°C
74ALVT16652 DGG
AV16652 DGG
SOT364-1
LOGIC SYMBOL (IEEE/IEC)
56
1
55
54
2
3
5
EN1(BA)
EN2(AB)
C3
G4
C5
G6
1
1
4
3D
4
1
6
1
1 6
2
5D
52
29
28
30
31
27
26
EN7(BA)
EN8(AB)
C9
G10
C11
G12
15
1
7
10 1
11D 12
1
1 12
6
51
16
8
49
17
9
48
19
10
47
20
12
45
21
13
44
23
14
43
24
10 9D
42
8
41
40
38
37
36
34
33
SW00158
1998 Feb 13
2
853-1854 18962
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
PIN CONFIGURATION
74ALVT16652
LOGIC SYMBOL
1OEAB
1
56
1OEBA
1CPAB
2
55
1CPBA
1SAB
3
54
1SBA
GND
4
53
GND
1A0
5
52
1B0
1A1
6
51
1B1
VCC
7
50
VCC
2
1CPAB
1A2
8
49
1B2
3
1SAB
1OEAB
1
1A3
9
48
1B3
54
1SBA
1OEBA
56
1A4
10
47
1B4
55
1CPBA
GND
11
46
GND
1A5
12
45
1B5
1A6
13
44
1B6
1A7
14
43
1B7
2A0
15
42
2B0
5
6
8
9
10
12 13
14
1A0 1A1 1A2 1A3 1A4 1A5 1A6 1A7
1AB 1B1 1B2 1B3 1B4 1B5 1B6 1B7
52
51
49
48 47
45 44
43
15
16
17
19 20
21 23
24
2A1
16
41
2B1
2A2
17
40
2B2
2A0 2A1 2A2 2A3 2A4 2A5 2A6 2A7
GND
18
39
GND
27
2CPAB
2A3
19
38
2B3
26
2SAB
2OEAB
28
2A4
20
37
2B4
31
2SBA
2OEBA
29
30
2CPBA
2A5
21
36
2B5
VCC
22
35
VCC
2A6
23
34
2B6
2A7
24
33
2B7
2AB 2B1 2B2 2B3 2B4 2B5 2B6 2B7
42
GND
25
32
GND
2SAB
26
31
2SBA
2CPAB
27
30
2CPBA
20EAB
28
29
2OEBA
41
40
38 37
36
34
33
SH00046
SW00159
PIN DESCRIPTION
PIN NUMBER
SYMBOL
2, 55, 27, 30
1CPAB, 1CPBA, 2CPAB, 2CPBA
Clock input A to B / Clock input B to A
3, 54, 26, 31
1SAB, 1SBA, 2SAB, 2SBA
Select input A to B / Select input B to A
5, 6, 8, 9, 10, 12, 13, 14
15, 16, 17, 19, 20, 21, 23, 24
1A0 – 1A7,
2A0 – 2A7
Data inputs/outputs (A side)
52, 51, 49, 48, 47, 45, 44, 43
42, 41, 40, 38, 37, 36, 34, 33
1B0 – 1B7,
2B0 – 2B7
Data inputs/outputs (B side)
1, 56, 28, 29
1OEAB, 1OEBA,
2OEAB, 2OEBA
4, 11, 18, 25, 32, 39, 46, 53
GND
Ground (0V)
7, 22, 35, 50
VCC
Positive supply voltage
1998 Feb 13
NAME AND FUNCTION
Output enable inputs
3
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
LOGIC DIAGRAM
nOEBA
nOEAB
nCPBA
nSBA
nCPAB
nSAB
1of 8 Channels
1D
C1
Q
nA0
nB0
1D
C1
Q
nA1
nB1
nA2
nB2
nA3
nB3
nA4
nB4
DETAIL A X 7
nA5
nB5
nA6
nB6
nA7
nB7
SH00065
FUNCTION TABLE
INPUTS
H
L
X
↑
*
**
DATA I/O
OPERATING MODE
nOEAB
nOEBA
nCPAB
nCPBA
nSAB
nSBA
nAx
nBx
L
L
H
H
H or L
↑
H or L
↑
X
X
X
X
Input
Input
Isolation
Store A and B data
X
H
H
H
↑
↑
H or L
↑
X
**
X
X
Input
Unspecified
output*
Store A, Hold B
Store A in both registers
L
L
X
L
H or L
↑
↑
↑
X
X
X
**
Unspecified
output*
Input
Hold A, Store B
Store B in both registers
L
L
L
L
X
X
X
H or L
X
X
L
H
Output
Input
Real time B data to A bus
Stored B data to A bus
H
H
H
H
X
H or L
X
X
L
H
X
X
Input
Output
Real time A data to B bus
Store A data to B bus
H
L
H or L
H or L
H
H
Output
Output
Stored A data to B bus
Stored B data to A bus
=
=
=
=
High voltage level
Low voltage level
Don’t care
Low-to-High clock transition
The data output function may be enabled or disabled by various signals at the nOEBA and nOEAB inputs. Data input functions are
always enabled, i.e., data at the bus pins will be stored on every Low-to-High transition of the clock.
If both Select controls (nSAB and nSBA) are Low, then clocks can occur simultaneously. If either Select control is High, the clocks must
be staggered in order to load both registers.
1998 Feb 13
4
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
The following examples demonstrate the four fundamental
bus-management functions that can be performed with the
74ALVT16652. The select pins determine whether data is stored or
REAL TIME BUS TRANSFER
BUS B TO BUS A
A
B
transferred through the device in real time. The output enable pins
determine the direction of the data flow.
REAL TIME BUS TRANSFER
BUS A TO BUS B
A
STORAGE FROM
A, B, OR A AND B
B
A
B
}
}
}
nOEAB nOEBA nCPAB nCPBA nSAB nSBA
L
L
X
X
X
L
74ALVT16652
nOEAB nOEBA nCPAB nCPBA nSAB nSBA
H
H
X
X
L
X
nOEAB nOEBA nCPAB nCPBA nSAB nSBA
X
H
↑
X
X
X
L
L
X
H
X
↑
↑
↑
X
X
X
X
TRANSFER STORED DATA
TO A OR B
A
B
}
nOEAB nOEBA nCPAB nCPBA nSAB nSBA
H
L
H|L
H|L
H
H
SH00066
1998 Feb 13
5
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
ABSOLUTE MAXIMUM RATINGS1, 2
PARAMETER
SYMBOL
VCC
IIK
CONDITIONS
RATING
UNIT
–0.5 to +4.6
V
–50
mA
–0.5 to +7.0
V
VO < 0
–50
mA
Output in Off or High state
–0.5 to +7.0
V
Output in Low state
128
Output in High state
–64
DC supply voltage
DC input diode current
VI < 0
voltage3
VI
DC input
IOK
DC output diode current
voltage3
VOUT
DC output
IOUT
DC output
out ut current
Tstg
Storage temperature range
mA
–65 to +150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
2.5V RANGE LIMITS
SYMBOL
VCC
3.3V RANGE LIMITS
PARAMETER
UNIT
DC supply voltage
MIN
MAX
MIN
MAX
2.3
2.7
3.0
3.6
V
0
5.5
0
5.5
V
VI
Input voltage
VIH
High-level input voltage
VIL
Input voltage
0.7
0.8
V
IOH
High-level output current
–8
–32
mA
Low-level output current
8
32
Low-level output current; current duty cycle ≤ 50%; f ≥ 1kHz
24
64
∆t/∆v
Input transition rise or fall rate; Outputs enabled
10
10
ns/V
Tamb
Operating free-air temperature range
+85
°C
IOL
1998 Feb 13
1.7
V
mA
–40
6
2.0
+85
–40
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
DC ELECTRICAL CHARACTERISTICS (3.3V "0.3V RANGE)
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN
VIK
Input clamp voltage
VOH
output
High-level out
ut voltage
VOL
VRST
VCC = 3.0V; IIK = –18mA
VCC = 3.0 to 3.6V; IOH = –100µA
VCC = 3.0V; IOH = –32mA
Low–level out
output
ut voltage
Power-up output low
voltage6
IHOLD
IEX
IPU/PD
Off current
Bus Hold current
Data in
inputs
uts7
VCC
2.0
2.3
V
V
0.2
VCC = 3.0V; IOL = 16mA
0.25
0.4
VCC = 3.0V; IOL = 32mA
0.3
0.5
VCC = 3.0V; IOL = 64mA
0.4
0.55
V
VCC = 3.6V; IO = 1mA; VI = VCC or GND
0.55
0.1
±1
0.1
10
0.1
20
0.5
10
VCC = 3.6V; VI = 0
0.1
-5
VCC = 0V; VI or VO = 0 to 4.5V
0.1
±100
Control pins
ins
VCC = 3.6V; VI = 5.5V
I/O Data
pins4
V
µA
µA
VCC = 3V; VI = 0.8V
75
130
µA
VCC = 3V; VI = 2.0V
–75
–140
µA
VCC = 3.0V; VI = 0V to 3.6V
±500
µA
VO = 5.5V; VCC = 3.0V
50
125
µA
Power up/down 3-State output
current3
VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC
OE/OE = Don’t care
40
±100
µA
0.07
0.14
3.2
7
0.07
0.14
0.04
0.4
VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0
Quiescent supply current
ICCZ
∆ICC
UNIT
Current into an output in the
High state when VO > VCC
ICCH
ICCL
–1.2
0.07
VCC = 3.6V; VI = VCC
IOFF
–0.85
VCC–0.2
VCC = 0 or 3.6V; VI = 5.5V
Input leakage current
MAX
VCC = 3.0V; IOL = 100µA
VCC = 3.6V; VI = VCC or GND
II
TYP1
VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0
VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO =
Additional supply current per
input pin2
VCC = 3V to 3.6V; One input at VCC–0.6V,
Other inputs at VCC or GND
05
mA
mA
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND
3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V ± 0.3V a
transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only.
4. Unused pins at VCC or GND.
5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground.
6. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power.
7. This is the bus hold overdrive current required to force the input to the opposite logic state.
1998 Feb 13
7
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
AC CHARACTERISTICS (3.3V "0.3V RANGE)
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
LIMITS
SYMBOL
PARAMETER
VCC = 3.3V ± 0.3V
WAVEFORM
MIN
TYP1
UNIT
MAX
fMAX
Maximum clock frequency
1
150
300
MHz
tPLH
tPHL
Propagation delay
nCPAB to nBx or nCPBA to nAx
1
1.0
1.0
2.4
2.1
3.6
3.2
ns
tPLH
tPHL
Propagation delay
nAx to nBx or nBx to nAx
2
0.5
0.5
1.5
1.6
2.5
2.7
ns
tPLH
tPHL
Propagation delay
nSAB to nBx or nSBA to nAx
3
0.5
0.5
2.4
2.1
3.9
3.9
ns
tPZH
tPZL
Output enable time
nOEBA to nAx
5
6
0.5
0.5
2.3
1.5
3.6
2.5
ns
tPHZ
tPLZ
Output disable time
nOEBA to nAx
5
6
1.5
1.0
3.4
2.6
5.0
3.8
ns
tPZH
tPZL
Output enable time
nOEAB to nBx
5
6
0.5
0.5
2.4
1.7
3.6
2.6
ns
tPHZ
tPLZ
Output disable time
nOEAB to nBx
5
6
1.5
1.5
3.8
3.1
5.8
4.5
ns
NOTE:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
AC SETUP REQUIREMENTS (3.3V "0.3V RANGE)
GND = 0V, tR = 2.5ns, tF = 2.5ns, CL = 50pF, RL = 500Ω, Tamb = –40 °C to +85 °C
LIMITS
SYMBOL
PARAMETER
WAVEFORM
VCC = 3.3V ±0.3V
MIN
TYP
UNIT
ts(H)
ts(L)
Setup time
nAx to nCPAB, nBx to nCPBA
4
1.6
1.6
0.8
0.6
ns
th(H)
th(L)
Hold time
nAx to nCPAB, nBx to nCPBA
4
0.5
0
–0.5
–0.8
ns
tw(H)
tw(L)
Pulse width, High or Low
nCPAB or nCPBA
1
1.5
1.5
1998 Feb 13
8
ns
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
DC ELECTRICAL CHARACTERISTICS (2.5V "0.2V RANGE)
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN
VIK
Input clamp voltage
VOH
output
High-level out
ut voltage
VOL
VCC = 2.3V; IIK = –18mA
VCC = 2.3 to 3.6V; IOH = –100µA
VCC = 2.3V; IOH = –8mA
Low-level output voltage
TYP1
MAX
–0.85
–1.2
VCC–0.2
VCC
1.8
2.1
VRST
Power-up output low
0.07
0.2
VCC = 2.3V; IOL = 24mA
0.3
0.5
VCC = 2.7V; IO = 1mA; VI = VCC or GND
0.55
±1
0.1
10
0.1
20
0.1
10
VCC = 2.7V; VI = 0
0.1
-5
Off current
VCC = 0V; VI or VO = 0 to 4.5V
0.1
"100
Bus Hold current
VCC = 2.3V; VI = 0.7V
90
µA
VCC = 2.3V; VI = 1.7V
–10
µA
Current into an output in the
High state when VO > VCC
VO = 5.5V; VCC = 2.3V
50
125
µA
Power up/down 3-State output
current3
VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC
OE/OE = Don’t care
40
100
µA
0.04
0.1
2.5
4.5
0.04
0.1
0.01
0.4
Control pins
ins
Input leakage current
VCC = 2.7V; VI = 5.5V
VCC = 2.7V; VI = VCC
IHOLD
A or B
IEX
IPU/PD
inputs6
ICCH
ICCL
I/O Data
pins4
VCC = 2.7V; Outputs High, VI = GND or VCC, IO = 0
Quiescent supply current
ICCZ
∆ICC
V
0.1
VCC = 0 or 2.7V; VI = 5.5V
IOFF
V
0.4
VCC = 2.7V; VI = GND
II
V
V
VCC = 2.3V; IOL = 100µA
VCC = 2.3V; IOL = 8mA
voltage7
UNIT
VCC = 2.7V; Outputs Low, VI = GND or VCC, IO = 0
VCC = 2.7V; Outputs Disabled; VI = GND or VCC, IO =
Additional supply current per
input pin2
VCC = 2.3V to 2.7V; One input at VCC–0.6V,
Other inputs at VCC or GND
05
µA
µA
mA
mA
NOTES:
1. All typical values are at VCC = 2.5V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND
3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 2.5V ± 0.2V a
transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only.
4. Unused pins at VCC or GND.
5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground.
6. Not guaranteed.
7. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power.
1998 Feb 13
9
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
74ALVT16652
AC CHARACTERISTICS (2.5V "0.2V RANGE)
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
LIMITS
SYMBOL
PARAMETER
VCC = 2.5V ± 0.2V
WAVEFORM
MIN
TYP1
UNIT
MAX
fMAX
Maximum clock frequency
1
150
200
tPLH
tPHL
Propagation delay
nCPAB to nBx or nCPBA to nAx
1
1.0
1.0
3.0
2.7
4.9
4.2
MHz
ns
tPLH
tPHL
Propagation delay
nAx to nBx or nBx to nAx
2
0.5
0.5
2.0
2.1
3.2
3.5
ns
tPLH
tPHL
Propagation delay
nSAB to nBx or nSBA to nAx
3
1.5
1.5
3.4
3.2
5.2
5.8
ns
tPZH
tPZL
Output enable time
nOEBA to nAx
5
6
1.5
0.5
3.2
2.0
4.7
3.2
ns
tPHZ
tPLZ
Output disable time
nOEBA to nAx
5
6
1.5
1.8
3.2
2.3
4.8
3.5
ns
tPZH
tPZL
Output enable time
nOEAB to nBx
5
6
1.5
1.0
3.3
2.5
4.9
3.6
ns
tPHZ
tPLZ
Output disable time
nOEAB to nBx
5
6
2.0
1.0
3.9
2.3
5.9
6.0
ns
NOTE:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
AC SETUP REQUIREMENTS (2.5V "0.2V RANGE)
GND = 0V, tR = 2.5ns, tF = 2.5ns, CL = 50pF, RL = 500Ω, Tamb = –40 °C to +85 °C
LIMITS
SYMBOL
PARAMETER
VCC = 2.5V ±0.2V
WAVEFORM
MIN
TYP
UNIT
ts(H)
ts(L)
Setup time 1
nAx to nCPAB, nBx to nCPBA
4
1.8
2.0
0.9
1.0
ns
th(H)
th(L)
Hold time 1
nAx to nCPAB, nBx to nCPBA
4
0.0
0.0
–1.0
–1.0
ns
tw(H)
tw(L)
Pulse width, High or Low
nCPAB or nCPBA
1
1.5
1.5
ns
NOTE:
1. This data sheet limit may vary among suppliers.
AC WAVEFORMS
VM = 1.5V at VCC w 3.0V; VM = VCC/2 at VCC v 2.7V
VX = VOL + 0.3V at VCC w 3.0V; VX = VOL + 0.15V at VCC v 2.7V
VY = VOH – 0.3V at VCC w 3.0V; VY = VOH – 0.15V at VCC v 2.7V
1/fMAX
nCPBA or
nCPAB
VM
3.0V or VCC
whichever
is less
VM
3.0V or VCC
nAx or nBx
VM
tPLH
tw(L)
nBx or nAx
VOH
nAx or nBx
VM
tPHL
VOH
tPLH
tPHL
VM
0V
0V
tw(H)
VM
VM
VM
VM
VOL
VOL
SH00030
SH00048
Waveform 1. Propagation Delay, Clock Input to Output, Clock
Pulse Width, and Maximum Clock Frequency
1998 Feb 13
Waveform 2. Propagation Delay, nAx to nBx or nBx to nAx
10
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register
(3-State)
3.0V or VCC
whichever
is less
3.0V or VCC
nSBA or
nSAB
VM
74ALVT16652
nOEBA
VM
VM
VM
nOEAB
0V
0V
tPHL
tPZH
tPHZ
tPLH
VOH
VOH
nAx or nBx
VM
VY
VM
VM
nAx or nBx
0V
VOL
SH00050
SH00032
Waveform 5. 3-State Output Enable Time to High Level and
Output Disable Time from High Level
Waveform 3. Propagation Delay, SBA to nAx or SAB to nBx
nAx or
nBx
ÉÉÉ ÉÉÉÉÉÉÉ
ÉÉÉ
ÉÉÉ ÉÉÉÉÉÉÉ
ÉÉÉ
ÉÉÉ ÉÉÉÉÉÉÉ
ÉÉÉ
VM
VM
VM
3.0V
or
VCC
VM
VM
ts(L)
th(H)
nCPBA or
nCPAB
VM
nOEAB
0V
tPZL
0V
ts(H)
3.0V
or
VCC
nOEBA
tPLZ
th(L)
nAx or
nBx
3.0V
or
VCC
VM
VM
VX
VOL
VM
tW(L)
3.0V
or
VCC
0V
0V
SH00051
NOTE: The shaded areas indicate when the input is permitted
to change for predictable output performance.
Waveform 6. 3-State Output Enable Time to Low Level and
Output Disable Time from Low Level
SH00049
Waveform 4. Data Setup and Hold Times
TEST CIRCUIT AND WAVEFORMS
6.0V or VCC x 2
VCC
Open
VOUT
VIN
PULSE
GENERATOR
tW
90%
RL
GND
VM
NEGATIVE
PULSE
10%
0V
tTHL (tF)
CL
VIN
VM
10%
D.U.T.
RT
90%
tTLH (tR)
tTLH (tR)
RL
90%
POSITIVE
PULSE
Test Circuit for 3-State Outputs
tTHL (tF)
VIN
90%
VM
VM
10%
10%
tW
0V
SWITCH POSITION
TEST
SWITCH
tPLZ/tPZL
6V or VCC x 2
tPLH/tPHL
Open
tPHZ/tPZH
GND
INPUT PULSE REQUIREMENTS
DEFINITIONS
FAMILY
Amplitude
RL = Load resistor; see AC CHARACTERISTICS for value.
CL = Load capacitance includes jig and probe capacitance:
See AC CHARACTERISTICS for value.
74ALVT16
Rep. Rate
3.0V or VCC
whichever v10MHz
is less
tW
500ns
tR
tF
v2.5ns v2.5ns
RT = Termination resistance should be equal to ZOUT of
pulse generators.
SW00025
1998 Feb 13
11
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register (3-State)
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm
1998 Feb 13
12
74ALVT16652
SOT371-1
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register (3-State)
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm
1998 Feb 13
13
74ALVT16652
SOT364-1
Philips Semiconductors
Product specification
2.5V/3.3V 16-bit bus transceiver/register (3-State)
74ALVT16652
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
yyyy mmm dd
14
Date of release: 05-96
9397-750-03573