PHILIPS 74LVT86

INTEGRATED CIRCUITS
74LVT86
3.3V Quad 2-input exclusive-OR gate
Product specification
IC24 Data Handbook
1996 Sep 10
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
QUICK REFERENCE DATA
SYMBOL
tPLH
tPHL
CIN
ICCL
FUNCTION TABLE
CONDITIONS
Tamb = 25°C;
GND = 0V
PARAMETER
Propagation
delay An
or Bn to Yn
CL = 50pF;
VCC = 3.3V
Input
capacitance
VI = 0V or 3.0V
Total supply
current
74LVT86
INPUTS
TYPICAL
3.4
3.5
ns
3
Outputs Low;
VCC = 3.6V
UNIT
pF
1
OUTPUT
Dna
Dnb
Qn
L
L
L
L
H
H
H
L
H
H
H
L
NOTES:
H = High voltage level
L = Low voltage level
mA
PIN CONFIGURATION
LOGIC SYMBOL (IEEE/IEC)
A0
1
14
VCC
B0
2
13
B3
=
1
3
2
Y0
3
12
A3
A1
4
11
Y3
B1
5
10
B2
Y1
6
9
A2
GND
7
8
Y2
4
6
5
9
8
10
SV00062
12
PIN DESCRIPTION
11
13
PIN
NUMBER
SYMBOL
1, 2, 4, 5, 9,
10, 12, 13
An, Bn
3, 6, 8, 11
Yn
Data outputs
7
GND
Ground (0V)
14
VCC
Positive supply voltage
NAME AND FUNCTION
SF00091
Data inputs
LOGIC SYMBOL
1
2
4
5
9
10 12 13
A0 B0 A1 B1 A2 B2
A3 B3
LOGIC DIAGRAM
A0
B0
A1
B1
VCC = Pin 14
GND = Pin 7
1
2
4
5
9
A2
B2
10
A3
B3
13
12
Y0 Y1 Y2 Y3
3
Y0
6
VCC = Pin 14
GND = Pin 7
Y1
3
6
8
11
SV00063
8
Y2
11
Y3
SV00064
ORDERING INFORMATION
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
DWG NUMBER
14-Pin Plastic SO
PACKAGES
–40°C to +85°C
74LVT86 D
74LVT86 D
SOT108-1
14-Pin Plastic SSOP
–40°C to +85°C
74LVT86 DB
74LVT86 DB
SOT337-1
14-Pin Plastic TSSOP
–40°C to +85°C
74LVT86 PW
74LVT86PW DH
SOT402-1
1996 Sep 10
2
853-1877 17273
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL
VCC
IIK
PARAMETER
RATING
UNIT
–0.5 to +4.6
V
–50
mA
–0.5 to +7.0
V
VO < 0
–50
mA
Output in Off or High state
–0.5 to +7.0
V
Output in High state
–32
Output in Low state
64
DC supply voltage
DC input diode current
VI < 0
voltage3
VI
DC input
IOK
DC output diode current
VOUT
CONDITIONS
DC output
voltage3
IOUT
DC output current
Tstg
Storage temperature range
mA
°C
–65 to 150
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
VCC
PARAMETER
UNIT
DC supply voltage
MIN
MAX
2.7
3.6
V
0
5.5
V
VI
Input voltage
VIH
High-level input voltage
VIL
Low-level Input voltage
0.8
V
IOH
High-level output current
–20
mA
IOL
Low-level output current
32
mA
∆t/∆v
Input transition rise or fall rate; Outputs enabled
10
ns/V
Tamb
Operating free-air temperature range
+85
°C
1996 Sep 10
2.0
–40
3
V
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions
Voltages are referenced to GND (ground = 0V)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN
VIK
Input clamp voltage
VOL
II
IOFF
High-level output voltage
Low-level output voltage
Input leakage current
Output off current
ICCH
Quiescent supply current
–1.2
∆ICC
CI
V
VCC–0.2
VCC = 2.7V; IOH = –6mA
2.4
VCC = 3.0V; IOH = –20mA
2.0
V
VCC = 2.7V; IOL = 100µA
0.2
VCC = 2.7V; IOL = 24mA
0.5
VCC = 3.0V; IOL = 32mA
0.5
VCC = 0 or 3.6V; VI = 5.5V
10
VCC = 3.6V; VI = VCC or GND
±1
VCC = 0V; VI or VO = 0 to 4.5V
±100
VCC = 3.6V; Outputs High, VI = GND or
VCC, IO = 0
0.02
Additional supply current per input pin2
VCC = 3V to 3.6V; One input at VCC–0.6V,
Other inputs at VCC or GND
Input capacitance
VI = 3V or 0
V
µA
µA
mA
VCC = 3.6V; Outputs Low, VI = GND or VCC,
IO = 0
ICCL
MAX
VCC = 2.7V; IIK = –18mA
VCC = 2.7 to 3.6V; IOH = –100µA
VOH
TYP1
UNIT
1
2
0.2
3
µA
pF
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND.
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω; Tamb = –40°C to +85°C.
LIMITS
SYMBOL
PARAMETER
VCC = 3.3V ± 0.3V
VCC = 2.7V
MIN
TYP1
MAX
MAX
WAVEFORM
UNIT
tPLH
tPHL
Propagation delay
An or Bn to Yn
(other input Low)
1
1.0
1.0
3.0
3.5
4.2
5.1
5.3
5.6
ns
tPLH
tPHL
Propagation delay
An or Bn to Yn
(other input High)
2
1.0
1.0
3.4
3.1
5.2
4.2
6.3
4.4
ns
NOTE:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
1996 Sep 10
4
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
AC WAVEFORMS
VM = 1.5V, VIN = GND to 2.7V
VIN
VM
VIN
VM
tPLH
tPHL
VM
VOUT
VM
VM
tPHL
VM
VOUT
tPLH
VM
VM
SF00093
SF00092
Waveform 1. Propagation Delay for Non-Inverting Outputs
Waveform 2. Propagation Delay for Inverting Outputs
TEST CIRCUIT AND WAVEFORMS
VCC
CL
10%
0V
D.U.T.
RT
AMP (V)
VM
10%
VOUT
PULSE
GENERATOR
90%
VM
NEGATIVE
PULSE
VIN
tW
90%
RL
tTHL (tF)
tTLH (tR)
tTLH (tR)
tTHL (tF)
90%
POSITIVE
PULSE
Test Circuit for Outputs
AMP (V)
90%
VM
VM
10%
10%
tW
0V
VM = 1.5V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
DEFINITIONS
FAMILY
RL = Load resistor; see AC CHARACTERISTICS for value.
CL = Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
74LVT
RT = Termination resistance should be equal to ZOUT of
pulse generators.
1996 Sep 10
Amplitude
Rep. Rate
2.7V
≤10MHz
tW
tR
tF
500ns ≤2.5ns ≤2.5ns
SV00022
5
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
SO14: plastic small outline package; 14 leads; body width 3.9 mm
1996 Sep 10
6
SOT108-1
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm
1996 Sep 10
7
SOT337-1
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
1996 Sep 10
8
SOT402-1
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
NOTES
1996 Sep 10
9
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
DEFINITIONS
Data Sheet Identification
Product Status
Definition
Objective Specification
Formative or in Design
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Preliminary Specification
Preproduction Product
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Product Specification
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
Philips Semiconductors and Philips Electronics North America Corporation
register eligible circuits under the Semiconductor Chip Protection Act.
 Copyright Philips Electronics North America Corporation 1996
All rights reserved. Printed in U.S.A.