TAGnology RFID GmbH | Grazer Vorstadt 142 | 8570 Voitsberg | AUSTRIA phone: +43 (0)3142/28 9 28-10 | fax: +43 (0)3142/28 9 28-20 | [email protected] | www.tagnology.com READER COMPONENTS & I•CODE CL RD701 PEGODA Contactless Smart Card Reader Product Specification Revision 3.1 PUBLIC Philips Semiconductors November 2004 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 CONTENTS 1 GENERAL INFORMATION....................................................................................................................................................3 1.1 1.2 1.3 1.4 2 FUNCTIONAL UNITS ...............................................................................................................................................................5 2.1 2.2 2.3 3 Scope.....................................................................................................................................................................................3 General Description ..........................................................................................................................................................3 Features ................................................................................................................................................................................4 Ordering Information .........................................................................................................................................................4 CL RD701 Pegoda Reader Parts .................................................................................................................................5 USB Type B Plug ...............................................................................................................................................................6 Power Supply......................................................................................................................................................................7 ELECTRICAL CHARACTERISTICS ..................................................................................................................................8 3.1 Operating Condition Range............................................................................................................................................8 3.2 Current Consumption .......................................................................................................................................................8 3.3 Operating distance ............................................................................................................................................................8 3.4 Interface Characteristics..................................................................................................................................................8 3.4.1 USB-Charcteristics ...................................................................................................................................................8 4 ELECTROMAGNETIC COMPATIBILITY..........................................................................................................................9 4.1 FCC Compliance Statement ..........................................................................................................................................9 4.2 COMPLIANCE INFORMATION according to 47CFR 2.1077 ......................................................................... 10 4.3 CE Declaration of Conformity..................................................................................................................................... 11 4.4 Mechanical Specifi cation.............................................................................................................................................. 12 4.4.1 Side View.................................................................................................................................................................. 12 4.4.2 Bottom View............................................................................................................................................................. 13 5 REVISION HISTORY............................................................................................................................................................. 14 Contact Information ...................................................................................................................................................................... 16 2 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader 1 CL RD701 GENERAL INFORMATION 1.1 Scope This document describes the basic functionality and the electrical specifications of the CL RD701 ‘Pegoda’ reader. This contactless reader is designed for an easy reader adaptation to a PC to use this device for test and application purposes . Furthermore this reader can be taken as a reference design for new reader development based on the CL RC632 reader IC. 1.2 General Description The Pegoda reader, CL RD701, is a contactless reader based on the CL RC632 reader IC. The CL RC632 is member of a family for highly integrated reader ICs for contactless communication at 13.56 MHz. ® All layers of ISO14443A+B, ISO 15693 as well as the MIFARE classic crypto are supported. The Pegoda reader is designed to fulfil several requirements. It covers all functionality of the CL RC632 to be able to use this reader as a reference design for a new hardware design based on the CL RC632 reader IC and is designed for easy PC adaptation and application development as well. . 3 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 1.3 Features • contactless smart card reader • based on the CL RM701 reader module containing the CL RC632 reader IC • contactless operating frequency 13.56 MHz • Supports MIFARE Dual Interface Card ICs and ISO 14443A part 1- 4 • Supports ISO 14443B • Supports MIFARE Classic crypto • Supports ISO 15693 • Supports Philips ICODE • Supports higher data rates of up to 424 kbit/s • Typical operating distance: 75 - 100mm • CE and FCC compliant • USB host interface • USB bus powered 5 VDC power supply • Unique serial number of each reader device • Supported by Windows 98 OSR2, Windows ME, Windows 2000 and Windows XP. ® ® ® 1.4 Ordering Information CL RD701/HAB can be ordered in bulk kits of 10 pieces. This means you cannot order e.g. 1 piece or 25 pieces but only a multiply of 10. Type 12NC Description Package containing: CL RD701 / HAB 9352 764 08122 1 pcs CL RD701 Pegoda reader, 1 pcs USB cable 1 pcs Ferrite Table 1 -1: CL RD701 Pegoda Reader Ordering Information 4 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 2 FUNCTIONAL UNITS 2.1 CL RD701 Pegoda Reader Parts The Pegoda reader, CL RD701, is divided into two parts: • CL RM701: • MF AN700: reader module. This reader module is the basic print including the CL RC632, a µ-Controller and all interfaces to a host. Please refer to the data sheet ‘CL RM701 Contactless reader module’. For description of C L RC632 please refer to data sheet ‘Mifare & I•Code CL RC632 Multiple protocol contactless reader IC ’. a flexible Pegoda antenna. Please refer to the application note ® ‘MIFARE MF RM 700 Antenna and matching adapter description’. Note: Additional documents can be received from Philips Semiconductors Internet Page: http://www.semiconductors.philips.com/markets/identification/datasheets/index.html#mifare 5 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 2.2 USB Type B Plug The USB type B plug is the default configuration of the Pegoda reader t o connect the reader to a host PC. Figure 1 . USB Type B connectors The default configuration uses the USB cable to communicate to the Pegoda as well as to supply the 5 V supply voltage. 6 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 2.3 Power Supply The CL RD701 is a bus powered 5 V USB device. No external power supply has to be connected to start to work with the Pegoda. Note: In order to fulfil the USB specification version 1.1, the reader module behaves after power on like a low power device. Having sent an activate command, the Pegoda is activated and the reader module switches to an idle state resulting in an increased power consumption. 7 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 3 ELECTRICAL CHARACTERISTICS 3.1 Operating Condition Range SYMBOL PARAMETER Tamb Ambient Temperature VDD DC Supply Voltage CONDITIONS MIN TYP MAX UNIT - -10 +25 +70 °C DVSS = 0V 4.5 5.0 5.5 V Table 3-1: Operating Condition Range 3.2 Current Consumption SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT IDVDD Supply Current StandBy - 70 - mA IDVDD Supply Current Idle, RF off - 160 - mA IDVDD Supply Current Idle, RF on - 250 - mA CONDITIONS MIN TYP MAX UNIT measured from the middle of the reader surface - 75 - mm Table 3-2: Current Consumption 3.3 Operating distance SYMBOL OD PARAMETER operating distance Table 3-3 . Operating Distance 3.4 Interface Characteristics 3.4.1 USB -CHARCTERISTICS SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT USBbaud USB- baudrate cable length max. 3 m - 12 - Mbaud Table 3-4USB Characteristics Note: The FCC and CE certification are only valid when the USB cable is equipped with the shielding components. 8 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 4 ELECTROMAGNETIC COMPATIBILITY The CL RD701 fulfils the following requirements of electromagnetic compatibility: FCC, Part 15 and CE. 4.1 FCC Compliance Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rul es. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution! The Federal Communications Commission warns the users that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Accessories: This equipment has been tested and found to comply with the limits of a Class A digital device. The accessories associated with this equipment are as follows: • Shielded video cable These accessories are required to be used in order to ensure compliance with FCC rules. 9 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 4.2 COMPLIANCE INFORMATION according to 47CFR 2.1077 We , Philips Semiconductors Gratkorn GmbH 811 Argues Avenue Sunnyvale, CA94088 -3409, USA Telephone 1800 234 7381 declare that the product CL RD 701, FCC ID OWR40089 is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 4.3 CE Declaration of Conformity This Information Technology Equipment has been tested and found to comply with the following European directives: Harmonised Standards applied Description EN 300 330: (2001-06) Air interface of the radio systems pursuant to § 3(2) (Article 3(2)) EN 60950:1992 Health and safety requirements pursuant to § 3 (1) 1. (Article 3(1) a) EN 301 489-9 :(2000-09) Protection requirements concerning electromagnetic compatibility § 3(1)2,(Article 3(1)(b)) Manufacturer's Name: Philips Semiconductors Gratkorn GmbH Manufacturer's Address: Mikronweg 1, A-8101 Gratkorn, Austria Type of Equipment: Contactless Smart Card Reader Model No.: CL RD701 Philips Semiconductors hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s), and said equipment is in conformity with the relevant harmonised standards as mentioned above. 11 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader 4.4 Mechanical Specification 4.4.1 SIDE VIEW 114 mm. 41 mm. 22 mm. 80 mm. Figure 2. Side View 12 CL RD701 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 4.4.2 BOTTOM VIEW 114 mm. 80 mm. 114 mm. 80 mm. Figure 3 . Bottom View 13 Philips Semiconductors Product Specification Rev. 3.1 November 2004 MIFARE & I•Code Pegoda Contactless Card Reader CL RD701 5 REVISION HISTORY REVISION DATE 3.1 Nov 2004 3.0 July 2004 2.0 April 2004 CPCN PAGE DESCRIPTION 4 Changed ordering type information for CL RD701 / HAB - - Product Version - - first published version 200411026 Table 5-1: Document Revision History 14 Definitions Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics section of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so on their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. Philips Semiconductors - a worldwide company Contact Information For additional information please visit http://www.semiconductors.philips.com.Fax: +31 4 0 27 24825 For sales offices addresses send e -mail to: [email protected] . © Koninklijke Philips Electronics N.V. 2002 SCA74 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without any notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. P hi li p s S em ico ndu ct ors