447 447-421 EMI/RFI Non-Environmental Band-in-a-Can Backshell with QwikClamp Strain-Relief Self-Locking Rotatable Coupling - Standard Profile 447 F S 421 NF 16 12-8 K P CONNECTOR DESIGNATORS A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile H = 45 J = 90 S = Straight Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Basic Part No. Cabe Entry (Table IV) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.5 inch A Thread (Table I) Length * L (Table IV) E Typ. (Table I) K ** 1.00 (25.4) Max Cable Entry N ** ** (Table IV) Anti-Rotation Device (Typ.) STYLE 2 (STRAIGHT See Note 1) Shell Size (Table I) * Length ± .060 (1.52) Min. Order Length 2.0 inch (See Note 3) M** F U.S. Patent 5211576 Internal Mechanical Strain Relief Anti-Rotation H (Table III) (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) J (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 4 447 447-421 EMI/RFI Non-Environmental Band-in-a-Can Backshell with QwikClamp Strain-Relief Self-Locking Rotatable Coupling - Standard Profile See inside back cover foldout or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 10 11 13 12 14 15 17 16 19 18 20 21 23 22 24 25 Dash Clamp No. Size (Ref) 02 08 03 08 04 08 05 12 06 12 07 16 08 16 09 20 10 20 11 24 12 24 13 28 14 28 15 32 16 32 17 36 18 36 20 40 22 44 24 48 K Dia .125 (3.2) .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max 1.380 (35.1) 1.410 (35.8) 1.430 (36.3) 1.460 (37.1) 1.480 (37.6) 1.490 (37.8) 1.510 (38.4) 1.550 (39.4) 1.580 (40.1) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.500 (38.1) 1.550 (39.4) 1.610 (40.9) 1.680 (42.7) 1.740 (44.2) 1.760 (44.7) 1.820 (46.2) 1.900 (48.3) 1.970 (50.0) TABLE IV: CABLE RANGE L M N Max Max Max .970 (24.6) .530 (13.5) .720 (18.3) .970 (24.6) .530 (13.5) .720 (18.3) .970 (24.6) .530 (13.5) .720 (18.3) 1.110 (28.2) .710 (18.0) .910 (23.1) 1.110 (28.2) .710 (18.0) .910 (23.1) 1.210 (30.7) .720 (18.3) 1.090 (27.7) 1.210 (30.7) .720 (18.3) 1.090 (27.7) 1.210 (30.7) .720 (18.3) 1.220 (31.0) 1.210 (30.7) .720 (18.3) 1.220 (31.0) 1.210 (30.7) .660 (16.8) 1.340 (34.0) 1.360 (34.5) .660 (16.8) 1.340 (34.0) 1.360 (34.5) .790 (20.1) 1.530 (38.9) 1.510 (38.4) .790 (20.1) 1.530 (38.9) 1.510 (38.4) .870 (22.1) 1.720 (43.7) 1.510 (38.4) .870 (22.1) 1.720 (43.7) 1.510 (38.4) .830 (21.1) 1.850 (47.0) 1.510 (38.4) .830 (21.1) 1.850 (47.0) 1.510 (38.4) .820 (20.8) 1.970 (50.0) 1.510 (38.4) .910 (23.1) 2.090 (53.1) 1.510 (38.4) .900 (22.9) 2.280 (57.9) Cable Min .100 (2.5) .098 (2.5) .098 (2.5) .203 (5.2) .203 (5.2) .328 (8.3) .328 (8.3) .452 (11.5) .452 (11.5) .515 (13.1) .515 (13.1) .640 (16.3) .640 (16.3) .765 (19.4) .765 (19.4) .859 (21.8) .859 (21.8) .984 (25.0) 1.125 (28.6) 1.250 (31.8) Range Max .250 (6.4) .200 (5.1) .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .500 (12.7) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) 1.000 (25.4) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 5