INTEGRATED CIRCUITS DATA SHEET 74AHC3G04; 74AHCT3G04 Inverter Product specification 2003 Nov 06 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 FEATURES DESCRIPTION • Symmetrical output impedance The 74AHC3G04/74AHCT3G04 are high-speed Si-gate CMOS devices. • High noise immunity • ESD protection: The 74AHC3G04/74AHCT3G04 provides three inverting buffer. – HBM EIA/JESD22-A114-A exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 1000 V. • Low power dissipation • Balanced propagation delays • SOT505-2 and SOT765-1 package • Specified from −40 to +85 °C and −40 to +125 °C. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf ≤ 3.0 ns. TYPICAL SYMBOL PARAMETER CONDITIONS UNIT 74AHC3G04 74AHCT3G04 tPHL/tPLH propagation delay input A to output Y CL = 15 pF; VCC = 5 V 3.1 3.4 ns CI input capacitance 1.5 1.5 pF CPD power dissipation capacitance 9 10 pF CL = 50 pF; f = 1 MHz; notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW). PD = CPD × VCC2 × fi × N + ∑(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; ∑(CL × VCC2 × fo) = sum of outputs. 2. The condition is VI = GND to VCC. FUNCTION TABLE See note 1. INPUT OUTPUT nA nY L H H L Note 1. H = HIGH voltage level; L = LOW voltage level. 2003 Nov 06 2 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 ORDERING AND PACKAGE INFORMATION PACKAGES TYPE NUMBER TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING −40 to +125 °C 8 TSSOP8 plastic SOT505-2 A04 74AHC3G04DP 74AHCT3G04DP −40 to +125 °C 8 TSSOP8 plastic SOT505-2 C04 74AHC3G04DC −40 to +125 °C 8 VSSOP8 plastic SOT765-1 A04 74AHCT3G04DC −40 to +125 °C 8 VSSOP8 plastic SOT765-1 C04 PINNING PIN SYMBOL DESCRIPTION 1 1A data input 2 3Y data output 3 2A data input 4 GND ground (0 V) 5 2Y data output 6 3A data input 7 1Y data output 8 VCC supply voltage handbook, halfpage handbook, halfpage 1A 1 8 VCC 3Y 2 7 1Y 04 2A 3 6 3A GND 4 5 2Y MNA719 1A 1Y 7 3 2A 2Y 5 6 3A 3Y 2 MNA720 Fig.1 Pin configuration. 2003 Nov 06 1 Fig.2 Logic symbol. 3 Philips Semiconductors Product specification Inverter handbook, halfpage 74AHC3G04; 74AHCT3G04 1 1 7 3 1 5 handbook, halfpage Y A MNA110 1 6 2 MNA721 Fig.3 IEC logic symbol. Fig.4 Logic diagram. RECOMMENDED OPERATING CONDITIONS 74AHC3G04 SYMBOL PARAMETER 74AHCT3G04 CONDITIONS UNIT MIN. TYP. MAX. MIN. TYP. MAX. VCC supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 V VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC −40 characteristics per device +25 +125 −40 +25 +125 °C tr, tf (∆t/∆f) input rise and fall times VCC = 3.3 ±0.3 V − − 100 − − − ns/V VCC = 5 ±0.5 V − − 20 − − 20 ns/V LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current VI < −0.5 V − −20 mA IOK output diode current −0.5 V < VO < VCC + 0.5 V; note 1 − ±20 mA IO output source or sink current −0.5 V < VO < VCC + 0.5 V − ±25 mA ICC, IGND VCC or GND current − ±75 mA Tstg storage temperature PD power dissipation Tamb = −40 to +125 °C −65 +150 °C − 250 mW Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2003 Nov 06 4 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 DC CHARACTERISTICS Type 74AHC3G04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = 25 °C VIH VIL VOH VOL HIGH-level input voltage 2.0 LOW-level input voltage HIGH-level output voltage LOW-level output voltage 1.5 − − V 3.0 2.1 − − V 5.5 3.85 − − V 2.0 − − 0.5 V 3.0 − − 0.9 V 5.5 − − 1.65 V IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V IO = −4.0 mA 3.0 2.58 − − V IO = −8.0 mA 4.5 3.94 − − V IO = 50 µA 2.0 − 0 0.1 V IO = 50 µA 3.0 − 0 0.1 V IO = 50 µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 − − 0.36 V VI = VIH or VIL VI = VIH or VIL IO = 8.0 mA 4.5 − − 0.36 V ILI input leakage current VI = VCC or GND 5.5 − − 0.1 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 10 µA CI input capacitance − − 1.5 10 pF 2003 Nov 06 5 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +85 °C VIH VIL VOH VOL 2.0 1.5 − − V 3.0 2.1 − − V 5.5 3.85 − − V 2.0 − − 0.5 V 3.0 − − 0.9 V 5.5 − − 1.65 V IO = −50 µA 2.0 1.9 − − V IO = −50 µA 3.0 2.9 − − V IO = −50 µA 4.5 4.4 − − V IO = −4.0 mA 3.0 2.48 − − V IO = −8.0 mA 4.5 3.8 − − V IO = 50 µA 2.0 − − 0.1 V IO = 50 µA 3.0 − − 0.1 V IO = 50 µA 4.5 − − 0.1 V IO = 4.0 mA 3.0 − − 0.44 V IO = 8.0 mA 4.5 − − 0.44 V HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VCC or GND 5.5 − − 1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 10 µA CI input capacitance − − − 10 pF 2003 Nov 06 6 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +125 °C VIH VIL VOH VOL 2.0 1.5 − − V 3.0 2.1 − − V 5.5 3.85 − − V 2.0 − − 0.5 V 3.0 − − 0.9 V 5.5 − − 1.65 V IO = −50 µA 2.0 1.9 − − V IO = −50 µA 3.0 2.9 − − V IO = −50 µA 4.5 4.4 − − V IO = −4.0 mA 3.0 2.40 − − V IO = −8.0 mA 4.5 3.70 − − V IO = 50 µA 2.0 − − 0.1 V IO = 50 µA 3.0 − − 0.1 V IO = 50 µA 4.5 − − 0.1 V IO = 4.0 mA 3.0 − − 0.55 V IO = 8.0 mA 4.5 − − 0.55 V HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VCC or GND 5.5 − − 2.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 40 µA CI input capacitance − − − 10 pF 2003 Nov 06 7 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Type 74AHCT3G04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = 25 °C VIH HIGH-level input voltage 4.5 to 5.5 2.0 − − V VIL LOW-level input voltage 4.5 to 5.5 − − 0.8 V VOH HIGH-level output voltage IO = −50 µA 4.5 4.4 4.5 − V IO = −8.0 mA 4.5 3.94 − − V VOL LOW-level output voltage VI = VIH or VIL VI = VIH or VIL IO = 50 µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 − − 0.36 V 5.5 − − 0.1 µA ILI input leakage current VI = VIH or VIL ICC quiescent supply current VI = VCC or GND; IO = 0 ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 CI input capacitance 5.5 − − 1.0 µA 5.5 − − 1.35 mA − 1.5 10 pF Tamb = −40 to +85 °C VIH HIGH-level input voltage 4.5 to 5.5 2.0 − − V VIL LOW-level input voltage 4.5 to 5.5 − − 0.8 V VOH HIGH-level output voltage IO = −50 µA 4.5 4.4 − − V IO = −8.0 mA 4.5 3.8 − − V VOL LOW-level output voltage VI = VIH or VIL VI = VIH or VIL IO = 50 µA 4.5 − − 0.1 V IO = 8.0 mA 4.5 − − 0.44 V 5.5 − − 1.0 µA ILI input leakage current VI = VIH or VIL ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 10 µA ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 5.5 − − 1.5 mA CI input capacitance − − − 10 pF 2003 Nov 06 8 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = −40 to +125 °C VIH HIGH-level input voltage 4.5 to 5.5 2.0 − − V VIL LOW-level input voltage 4.5 to 5.5 − − 0.8 V VOH HIGH-level output voltage IO = −50 µA 4.5 4.4 − − V IO = −8.0 mA 4.5 3.70 − − V IO = 50 µA 4.5 − − 0.1 V IO = 8.0 mA 4.5 − − 0.55 V VOL LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VIH or VIL 5.5 − − 2.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 40 µA ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 5.5 − − 1.5 mA CI input capacitance − − − 10 pF 2003 Nov 06 9 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 AC CHARACTERISTICS Type 74AHC3G04 GND = 0 V; tr = tf ≤ 3.0 ns. TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS MIN. TYP. MAX. UNIT 3.0 to 3.6 − − 7.1 ns 3.3 − 4.3 − ns CL (pF) VCC (V) Tamb = 25 °C tPHL/tPLH propagation delay input nA to output nY see Figs 5 and 6 15 4.5 to 5.5 − − 5.5 ns 5 − 3.1 − ns 3.0 to 3.6 − − 10.6 ns 3.3 − 6.1 − ns 4.5 to 5.5 − − 7.5 ns 5 − 4.5 − ns 3.0 to 3.6 1.0 − 8.5 ns 4.5 to 5.5 1.0 − 6.5 ns 3.0 to 3.6 1.0 − 12 ns 4.5 to 5.5 1.0 − 8.5 ns 3.0 to 3.6 1.0 − 11.0 ns 4.5 to 5.5 1.0 − 7.0 ns 3.0 to 3.6 1.0 − 14.5 ns 4.5 to 5.5 1.0 − 9.5 ns MIN. TYP. MAX. UNIT 4.5 to 5.5 − − 6.7 ns 5 − 3.4 − ns 4.5 to 5.5 − − 7.7 ns 5 − 4.9 − ns 15 4.5 to 5.5 1.0 − 7.5 ns 50 4.5 to 5.5 1.0 − 8.5 ns 50 Tamb = −40 to +85 °C tPHL/tPLH propagation delay input nA to output nY see Figs 5 and 6 15 50 Tamb = −40 to +125 °C tPHL/tPLH propagation delay input nA to output nY see Figs 5 and 6 15 50 Type 74AHCT3G04 GND = 0 V; tr = tf ≤ 3.0 ns. TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS CL (pF) VCC (V) Tamb = 25 °C tPHL/tPLH propagation delay input nA to output nY see Figs 5 and 6 15 50 Tamb = −40 to +85 °C tPHL/tPLH 2003 Nov 06 propagation delay input nA to output nY see Figs 5 and 6 10 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS CL (pF) MIN. TYP. MAX. UNIT VCC (V) Tamb = −40 to +125 °C tPHL/tPLH propagation delay input nA to output nY see Figs 5 and 6 15 4.5 to 5.5 1.0 − 8.5 ns 50 4.5 to 5.5 1.0 − 10.0 ns AC WAVEFORMS VI handbook, halfpage VM nA input VM GND t PHL t PLH VOH 90% VM nY output 10% VOL t THL TYPE VI INPUT REQUIREMENTS VM VM INPUT t TLH MNA722 VM OUTPUT 74AHC3G04 GND to VCC 50% VCC 50% VCC 74AHCT3G04 GND to 3.0 V 1.5 V 50% VCC Fig.5 Input (nA) to output (nY) propagation delays. 2003 Nov 06 11 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 VCC handbook, halfpage PULSE GENERATOR VI VO D.U.T. RT CL MNA101 Definitions for test circuit: CL = load capacitance including jig and probe capacitance (see Chapter “AC characteristics”). RT = termination resistance should be equal to the output impedance Z0 of the pulse generator. Fig.6 Load circuitry for switching times. 2003 Nov 06 12 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 PACKAGE OUTLINES TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm D E A SOT505-2 X c HE y v M A Z 5 8 A A2 (A3) A1 pin 1 index θ Lp L 1 4 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ mm 1.1 0.15 0.00 0.95 0.75 0.25 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.5 0.47 0.33 0.2 0.13 0.1 0.70 0.35 8° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 2003 Nov 06 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16 --- 13 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm D E SOT765-1 A X c y HE v M A Z 5 8 Q A A2 A1 pin 1 index (A3) θ Lp 1 4 e L detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ mm 1 0.15 0.00 0.85 0.60 0.12 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.40 0.15 0.21 0.19 0.2 0.13 0.1 0.4 0.1 8° 0° Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 2003 Nov 06 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-06-07 MO-187 14 Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2003 Nov 06 15 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 01/pp16 Date of release: 2003 Nov 06 Document order number: 9397 750 12118