Bulletin I2181 11/04
SAFEIR Series
30TPS16PbF
PHASE CONTROL SCR
VT < 1.3V @ 20A
Lead-Free ("PbF" suffix)
ITSM = 300A
VRRM= 1600V
Description/ Features
The 30TPS16PbF SAFEIR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has
reliable operation up to 125°C junction temperature.
Typical applications are in input rectification (soft
start) and these products are designed to be used
with International Rectifier input diodes, switches
and output rectifiers which are available in identical
package outlines.
Major Ratings and Characteristics
Characteristics
Package Outline
Values
Units
20
A
30
A
VRRM/ VDRM
1600
V
ITSM
300
A
1.3
V
dv/dt
500
V/µs
di/dt
150
A/µs
- 40 to 125
°C
IT(AV)
Sinusoidal
waveform
IRMS
VT
@ 20 A, TJ = 25°C
TJ
www.irf.com
TO-247AC
1
30TPS16PbF SAFEIR Series
Bulletin I2181 11/04
Voltage Ratings
VRRM/VDRM, max. repetitive
VRSM , maximum non repetitive
IRRM/IDRM
Part Number
peak and off-state voltage
V
peak reverse voltage
V
125°C
mA
30TPS16PbF
1600
1700
10
Absolute Maximum Ratings
Parameters
30TPS..
Units
IT(AV) Max. Average On-state Current
20
A
IRMS Max. RMS On-state Current
30
ITSM
Max. Peak One Cycle Non-Repetitive
250
Surge Current
300
Max. I2t for Fusing
310
I2t
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
A2s
442
2
2
Conditions
@ TC = 95° C, 180° conduction half sine wave
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
2
t = 0.1 to 10ms, no voltage reapplied
@ 20A, TJ = 25°C
I √t
Max. I √t for Fusing
VTM
Max. On-state Voltage Drop
1.3
V
rt
On-state Slope Resistance
12
mΩ
VT(TO) Threshold Voltage
1.0
V
IRM/IDM Max.Reverse and Direct
0.5
mA
Leakage Current
10
IH
Max. Holding Current
100
mA
Anode Supply = 6V, Resistive load, Initial IT=1A
IL
Max. Latching Current
200
mA
Anode Supply = 6V, Resistive load
dv/dt Max. Rate of Rise of off-state Voltage
500
V/µs
di/dt Max. Rate of Rise of turned-on Current
150
A/µs
2
4420
A √s
TJ = 125°C
TJ = 25 °C
TJ = 125 °C
VR = rated VRRM/ VDRM
www.irf.com
30TPS16PbF SAFEIR Series
Bulletin I2181 11/04
Triggering
Parameters
PGM
Max. Peak Gate Power
30TPS..
Units
8.0
W
Conditions
PG(AV) Max. Average Gate Power
2.0
+ IGM Max. Peak Positive Gate Current
1.5
A
- VGM Max. Peak Negative Gate Voltage
10
V
IGT
Max. Required DC Gate Current
60
mA
to Trigger
45
Anode supply = 6V, resistive load, TJ = 25°C
20
Anode supply = 6V, resistive load, TJ = 125°C
VGT
V
Anode supply = 6V, resistive load, TJ = - 10°C
Max. Required DC Gate Voltage
2.5
Anode supply = 6V, resistive load, TJ = - 10°C
to Trigger
2.0
Anode supply = 6V, resistive load, TJ = 25°C
1.0
Anode supply = 6V, resistive load, TJ = 125°C
VGD
Max. DC Gate Voltage not to Trigger
0.25
TJ = 125°C, VDRM = rated value
IGD
Max. DC Gate Current not to Trigger
2.0
mA
30TPS..
Units
0.9
µs
TJ = 125°C, VDRM = rated value
Switching
Parameters
tgt
Typical Turn-on Time
trr
Typical Reverse Recovery Time
tq
Typical Turn-off Time
4
Conditions
TJ = 25°C
TJ = 125°C
110
Thermal-Mechanical Specifications
Parameters
30TPS..
Units
TJ
Max. Junction Temperature Range
- 40 to 125
°C
Tstg
Max. Storage Temperature Range
- 40 to 125
RthJC Max. Thermal Resistance Junction
0.8
°C/W
Conditions
DC operation
to Case
RthJA Max. Thermal Resistance Junction
40
to Ambient
RthCS Max. Thermal Resistance Case
0.2
Mounting surface, smooth and greased
to Heatsink
wt
Approximate Weight
T
Mounting Torque
Case Style
Marking Device
www.irf.com
6 (0.21)
g (oz.)
Min.
6 (5)
Kg-cm
Max.
12 (10)
(lbf-in)
TO-247AC
Jedec (Modified)
30TPS16
3
30TPS16PbF SAFEIR Series
30TPS.. Series
R thJC (DC) = 0.8 °C/ W
120
Conduction Angle
110
30°
60°
90°
100
120°
180°
90
0
5
10
15
20
25
30TPS.. Series
RthJC (DC) = 0.8 °C/ W
120
110
Conduction Period
100
30°
90
60°
90°
120°
180° DC
80
0
5
10
15
20
25
30
Average On-state Current (A)
Fig. 2 - Current Rating Characteristics
180°
120°
90°
60°
30°
50
40
RMS Limit
30
20
Conduction Angle
30TPS.. Series
TJ= 125°C
10
0
5
10
15
20
25
30
Maximum Average On-state Power Loss (W)
Average On-state Current (A)
35
80
DC
180°
120°
90°
60°
30°
60
40 RMSLimit
Conduction Period
20
30TPS.. Series
TJ = 125°C
0
0
10
20
30
40
50
Average On-state Current (A)
Average On-state Current (A)
Fig. 3 - On-state Power Loss Characteristics
Fig. 4 - On-state Power Loss Characteristics
280
At Any Rated Load Condition And With
Rated V RRM Applied Following Surge.
260
Initial TJ = 125°C
@60 Hz 0.0083 s
240
@50 Hz 0.0100 s
220
200
180
160
140
30TPS.. Series
120
1
10
100
Numb er Of Equa l Amplitude Half Cyc le Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
4
130
Fig. 1 - Current Rating Characteristics
60
0
Maximum Allow able Case Temperature (°C)
130
Peak Half Sine Wave On-state Current (A)
Peak Half Sine Wave On-state Current (A)
Maximum Average On-state Power Loss (W)
Maximum Allowable Case Temperature (°C)
Bulletin I2181 11/04
300
280
260
240
Maximum Non Repetitive Surge Current
Versus Pulse Tra in Duration. Control
Of Conduc tion May Not Be Maintained.
Initial TJ= 125°C
No Voltage Reap plied
Rated VRRMReapplied
220
200
180
160
140
120
0.01
30TPS.. Series
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
www.irf.com
30TPS16PbF SAFEIR Series
Bulletin I2181 11/04
Instantaneous On-state Current (A)
1000
TJ= 25°C
TJ= 125°C
100
10
30TPS.. Series
1
0
1
2
3
4
5
6
7
Instantaneous On-state Voltage (V)
Transient Thermal Impedance Z thJC (°C/ W)
Fig. 7 - On-state Voltage Drop Characteristics
1
Steady State Value
(DC Operation)
D = 0.50
D = 0.33
D = 0.25
D = 0.17
0.1
D = 0.08
Single Pulse
30TPS.. Series
0.01
0.0001
0.001
0.01
0.1
1
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
Rec tangular gate pulse
a)Rec ommended load line for
rated di/ dt: 10 V, 20 ohms
tr = 0.5 µs, tp >= 6 µs
b)Recommended load line for
<= 30% rated di/ dt: 10 V, 65 ohms
10
tr = 1 µs, tp >= 6 µs
(1) PGM = 40 W, tp = 1 ms
(2) PGM = 20 W, tp = 2 ms
(3) PGM = 8 W, tp = 5 ms
(4) PGM = 4 W, tp = 10 ms
(a)
(b)
VGD
IGD
0.1
0.001
TJ = -10 °C
TJ = 125 °C
1
TJ = 25 °C
Instantaneous Gate Voltage (V)
100
(4)
0.1
(2)
(1)
Frequenc y Limited by PG(AV)
30TPS.. Series
0.01
(3)
1
10
100
Instantaneous Gate Current (A)
Fig. 9 - GateCharacteristics
www.irf.com
5
30TPS16PbF SAFEIR Series
Bulletin I2181 11/04
Outline Table
3. 65 (0 .14 4)
15 .90 ( 0 .626 )
3. 55 (0 .13 9)
DIA.
5. 30 (0 .20 9)
4.70 ( 0.185)
15 .30 ( 0 .602 )
2.5 ( 0.098)
1.5 ( 0.059)
5. 70 (0 .22 5)
5.30 ( 0.208)
20 .30 (0 .800 )
19 .70 (0 .775 )
5.50 ( 0.217)
4. 50 ( 0 .17 7)
1
2
(2 PLCS.)
3
14. 80 ( 0.583)
14 .20 (0 .559 )
4. 30 ( 0 .17 0)
3. 70 (0 .14 5)
2. 20 (0 .08 7)
1. 40 (0 .05 6)
2. 40 ( 0 .09 5)
M AX.
2
(A)
M AX .
1. 00 (0 .03 9)
0.80 ( 0.032)
0. 40 ( 0 .21 3)
10. 94 ( 0.430)
10 .86 ( 0 .427 )
1 (K) (G) 3
Dimensions in millimeters and inches
Marking Information
EXAMPLE: THIS IS A 30TPS16
WITH ASSEMBLY
LOT CODE 5657
ASSEMBLED ON WW 35, 2000
IN ASSEMBLY LINE "H"
6
INTERNATIONAL
RECTIFIER
LOGO
PART NUMBER
30TPS16
P035H
56
ASSEMBLY
LOT CODE
57
DATE CODE
P = LEAD-FREE
YEAR 0 = 2000
WEEK 35
LINE H
www.irf.com
30TPS16PbF SAFEIR Series
Bulletin I2181 11/04
Ordering Information Table
Device Code
30
T
P
S
1
2
3
4
16 PbF
5
6
1
-
Current Rating (30 = 30A)
2
-
Circuit Configuration:
T = Thyristor
3
-
Package:
4
-
5
-
Voltage Rating (16 = 1600V)
6
-
! none = Standard Production
T = TO-247
Type of Silicon:
S = Standard Recovery Rectifier
! PbF = Lead-Free
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 11/04
www.irf.com
7