PHILIPS PSMN038

PSMN038-100K
N-channel enhancement mode field-effect transistor
Rev. 01 — 16 January 2001
Product specification
1. Description
SiliconMAX™1 products use the latest Philips TrenchMOS™2 technology to achieve
the lowest possible on-state resistance in a SOT96-1 (SO8) package.
Product availability:
PSMN038-100K in SOT96-1 (SO8).
2. Features
■ Very low on-state resistance
■ Fast switching
■ TrenchMOS™ technology.
3. Applications
■ DC to DC convertor
■ Computer motherboards
■ Switch mode power supplies.
c
c
4. Pinning information
Table 1:
Pinning - SOT96-1, simplified outline and symbol
Pin
Description
1,2,3
source (s)
4
gate (g)
5,6,7,8
drain (d)
Simplified outline
8
5
1
4
MBK187
SOT96-1 (SO8)
SiliconMAX is a trademark of Royal Philips Electronics.
TrenchMOS is a trademark of Royal Philips Electronics.
d
g
Top view
1.
2.
Symbol
MBB076
s
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
5. Quick reference data
Table 2:
Quick reference data
Symbol Parameter
VDS
drain-source voltage (DC)
Conditions
Typ
Max
Unit
Tj = 25 to 150 °C
−
100
V
ID
drain current (DC)
Tsp = 80 °C; Figure 2 and 3
−
6.3
A
Ptot
total power dissipation
Tsp = 80 °C; Figure 1
−
3.5
W
Tj
junction temperature
−
150
°C
RDSon
drain-source on-state resistance
33
38
mΩ
Min
Max
Unit
VGS = 10 V; ID = 5.2 A; Tj = 25 °C
6. Limiting values
Table 3: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
−
100
V
−
±20
V
Tsp = 80 °C
−
6.3
A
peak drain current
Tsp = 25 °C; pulsed; tp ≤ 10 µs
−
50
A
Tsp = 80 °C
VDS
drain-source voltage (DC)
VGS
gate-source voltage (DC)
ID
drain current (DC)
IDM
Tj = 25 to 150 °C
Ptot
total power dissipation
−
3.5
W
Tstg
storage temperature
−55
+150
°C
Tj
operating junction temperature
−55
+150
°C
Source-drain diode
IS
source (diode forward) current (DC) Tsp = 80 °C
−
3.1
A
ISM
peak source (diode forward) current Tsp = 25 °C; pulsed; tp ≤ 10 µs
−
50
A
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
2 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
03aa25
03aa17
120
120
Pder
(%)
100
Ider
(%)
100
80
80
60
60
40
40
20
20
0
0
0
25
50
75
100
125
Tsp
150
(oC)
0
175
25
50
75
100
125
150 175
Tsp (oC)
VGS ≥ 5 V
P tot
P der = ---------------------- × 100%
P
°
ID
I der = ------------------- × 100%
I
°
tot ( 25 C )
D ( 25 C )
Fig 1. Normalized total power dissipation as a
function of solder point temperature.
Fig 2. Normalized continuous drain current as a
function of solder point temperature.
03ad97
102
ID
(A)
RDSon = VDS/ ID
tp = 10 µs
10
100 µs
1 ms
10 ms
1
δ=
P
tp
100 ms
D.C.
T
10-1
t
tp
T
10-2
10-1
1
10
102
VDS (V)
103
Tsp = 25 °C; IDM is single pulse
Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage.
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
3 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
7. Thermal characteristics
Table 4:
Thermal characteristics
Symbol Parameter
Rth(j-sp)
thermal resistance from junction to solder
point
Conditions
Value Unit
mounted on a metal clad substrate; Figure 4
20
K/W
7.1 Transient thermal impedance
03ad96
102
Zth(j-sp)
(K/W)
10
δ = 0.5
0.2
0.1
1
0.05
0.02
δ=
P
10-1
tp
T
single pulse
t
tp
T
10-2
10-4
10-3
10-2
10-1
1
10
tp (s)
102
Tsp = 25 °C
Fig 4. Transient thermal impedance from junction to solder point as a function of pulse duration.
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
4 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
8. Characteristics
Table 5: Characteristics
Tj = 25 °C unless otherwise specified
Symbol Parameter
Conditions
Min
Typ
Max
Unit
ID = 250 µA; VGS = 0 V
100
130
−
V
Tj = 25 °C
2
−
4
V
Tj = 150 °C
1.2
−
−
V
Static characteristics
V(BR)DSS drain-source breakdown voltage
VGS(th)
gate-source threshold voltage
ID = 1 mA; VDS = VGS; Figure 9
Tj = −55 °C
IDSS
drain-source leakage current
−
−
6
V
VDS = 80 V; VGS = 0 V; Tj = 25 °C
−
−
1
µA
VDS = 100 V; VGS = 0 V; Tj = 150 °C
−
−
0.5
mA
−
−
100
nA
Tj = 25 °C
−
33
38
mΩ
Tj = 150 °C
−
76
88
mΩ
IGSS
gate-source leakage current
VGS = ±20 V; VDS = 0 V
RDSon
drain-source on-state resistance
VGS = 10 V; ID = 5.2 A; Figure 7 and 8
Dynamic characteristics
gfs
forward transconductance
VDS = 15 V; ID = 6.3 A; Figure 11
−
20
−
S
Qg(tot)
total gate charge
ID = 6.3 A; VDD = 50 V; VGS = 10 V; Figure 14
−
43
−
nC
Qgs
gate-source charge
−
6.5
−
nC
Qgd
gate-drain (Miller) charge
−
16
21.5
nC
Ciss
input capacitance
−
1740 −
pF
Coss
output capacitance
−
220
−
pF
Crss
reverse transfer capacitance
−
135
−
pF
td(on)
turn-on delay time
−
15
30
ns
VGS = 0 V; VDS = 25 V; f = 1 MHz; Figure 12
VDD = 50 V; ID = 1 A; VGS = 10 V; RG = 6 Ω
tr
rise time
−
13
25
ns
td(off)
turn-off delay time
−
50
80
ns
tf
fall time
−
25
40
ns
Source-drain (reverse) diode
VSD
source-drain (diode forward) voltage IS = 2.3 A; VGS = 0 V; Figure 13
trr
reverse recovery time
Qr
recovery charge
IS = 6.3 A; dIS/dt = −100 A/µs; VGS = 0 V
0.7
1.1
V
85
−
ns
−
0.3
−
µC
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
−
−
Rev. 01 — 16 January 2001
5 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
03ae00
03ad98
50
ID
(A)
50
ID
(A)
VGS = 10 V 7 V
6V
40
40
30
30
VDS > ID X RDSon
20
20
5V
10
10
Tj = 150 ºC
25 ºC
4.5 V
0
0
0
1
2
3
0
4 VDS (V) 5
Tj = 25 °C
2
4
6 VGS (V) 8
Tj = 25 °C and 150 °C; VDS > ID × RDSon
Fig 5. Output characteristics: drain current as a
function of drain-source voltage; typical values.
Fig 6. Transfer characteristics: drain current as a
function of gate-source voltage; typical values.
03aa29
3
a 2.8
2.6
2.4
2.2
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
03ad99
0.1
RDSon
(Ω)
0.09
4.5 V
5V
VGS = 6 V
0.08
0.07
0.06
7V
0.05
10 V
0.04
Tj = 25 ºC
-60
0.03
0
10
20
30
40 ID (A) 50
Tj = 25 °C
-20
20
60
100
140
180
Tj (oC)
R DSon
a = --------------------------R
°
DSon ( 25 C )
Fig 7. Drain-source on-state resistance as a function
of drain current; typical values.
Fig 8. Normalized drain-source on-state resistance
factor as a function of junction temperature.
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
6 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
03aa32
5
VGS(th)
4.5
4
(V)
03aa35
10-1
ID
(A)
max.
10-2
3.5
3
10-3
typ.
2.5
min
2
typ
max
10-4
min
1.5
1
10-5
0.5
0
10-6
-60
-20
20
60
100
140
Tj (oC)
180
1
2
3
4
VGS (V)
5
Tj = 25 °C; VDS = 5 V
ID = 1 mA; VDS = VGS
Fig 9. Gate-source threshold voltage as a function of
junction temperature.
03ae01
Fig 10. Sub-threshold drain current as a function of
gate-source voltage.
03ae03
104
40
VDS > ID X RDSon
gfs
(S)
0
Ciss,
Coss,
Tj = 25 ºC
Crss
(pF)
30
150 ºC
Ciss
103
20
10
Coss
Crss
102
0
0
10
20
30
10-1
40 ID (A) 50
Tj = 25 °C and 150 °C; VDS > ID × RDSon
10
VDS (V)
102
VGS = 0 V; f = 1 MHz
Fig 11. Forward transconductance as a function of
drain current; typical values.
Fig 12. Input, output and reverse transfer capacitances
as a function of drain-source voltage; typical
values.
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
1
Rev. 01 — 16 January 2001
7 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
03ae04
03ae02
10
50
ID = 6.3 A
VGS = 0 V
IS
(A)
40
VGS
(V) Tj = 25 ºC
8
VDD = 20 V 50 V 80 V
30
6
20
4
150 ºC
10
Tj = 25 ºC
2
0
0
0
0.4
0.8
0
VSD (V) 1.2
Tj = 25 °C and 150 °C; VGS = 0 V
30
QG (nC)
45
ID = 6.3 A; VDD = 20 V, 50 V and 80 V
Fig 13. Source (diode forward) current as a function of
source-drain (diode forward) voltage; typical
values.
Fig 14. Gate-source voltage as a function of gate
charge; typical values.
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
15
Rev. 01 — 16 January 2001
8 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
9. Package outline
SO8: plastic small outline package; 8 leads; body width 3.9 mm
SOT96-1
D
E
A
X
c
y
HE
v M A
Z
5
8
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
1
L
4
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
mm
1.75
0.25
0.10
1.45
1.25
0.25
0.49
0.36
0.25
0.19
5.0
4.8
4.0
3.8
1.27
6.2
5.8
1.05
1.0
0.4
0.7
0.6
0.25
0.25
0.1
0.7
0.3
0.01
0.019 0.0100
0.014 0.0075
0.20
0.19
0.16
0.15
0.244
0.039 0.028
0.050
0.041
0.228
0.016 0.024
inches
0.010 0.057
0.069
0.004 0.049
0.01
0.01
0.028
0.004
0.012
θ
o
8
0o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT96-1
076E03
MS-012
EIAJ
EUROPEAN
PROJECTION
ISSUE DATE
97-05-22
99-12-27
Fig 15. SOT96-1 (SO8).
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
9 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
10. Revision history
Table 6:
Revision history
Rev Date
01
20010116
CPCN
Description
-
Product specification; initial version
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
10 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
11. Data sheet status
Datasheet status
Product status
Definition [1]
Objective specification
Development
This data sheet contains the design target or goal specifications for product development. Specification may
change in any manner without notice.
Preliminary specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any
time without notice in order to improve design and supply the best possible product.
[1]
Please consult the most recently issued data sheet before initiating or completing a design.
12. Definitions
13. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
Right to make changes — Philips Semiconductors reserves the right to
make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve
design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
licence or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products
are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
© Philips Electronics N.V. 2001 All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
11 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
Philips Semiconductors - a worldwide company
Argentina: see South America
Australia: Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
Austria: Tel. +43 160 101, Fax. +43 160 101 1210
Belarus: Tel. +375 17 220 0733, Fax. +375 17 220 0773
Belgium: see The Netherlands
Brazil: see South America
Bulgaria: Tel. +359 268 9211, Fax. +359 268 9102
Canada: Tel. +1 800 234 7381
China/Hong Kong: Tel. +852 2 319 7888, Fax. +852 2 319 7700
Colombia: see South America
Czech Republic: see Austria
Denmark: Tel. +45 3 288 2636, Fax. +45 3 157 0044
Finland: Tel. +358 961 5800, Fax. +358 96 158 0920
France: Tel. +33 14 099 6161, Fax. +33 14 099 6427
Germany: Tel. +49 40 23 5360, Fax. +49 402 353 6300
Hungary: Tel. +36 1 382 1700, Fax. +36 1 382 1800
India: Tel. +91 22 493 8541, Fax. +91 22 493 8722
Indonesia: see Singapore
Ireland: Tel. +353 17 64 0000, Fax. +353 17 64 0200
Israel: Tel. +972 36 45 0444, Fax. +972 36 49 1007
Italy: Tel. +39 039 203 6838, Fax +39 039 203 6800
Japan: Tel. +81 33 740 5130, Fax. +81 3 3740 5057
Korea: Tel. +82 27 09 1412, Fax. +82 27 09 1415
Malaysia: Tel. +60 37 50 5214, Fax. +60 37 57 4880
Mexico: Tel. +9-5 800 234 7381
Middle East: see Italy
Netherlands: Tel. +31 40 278 2785, Fax. +31 40 278 8399
New Zealand: Tel. +64 98 49 4160, Fax. +64 98 49 7811
Norway: Tel. +47 22 74 8000, Fax. +47 22 74 8341
Philippines: Tel. +63 28 16 6380, Fax. +63 28 17 3474
Poland: Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Romania: see Italy
Russia: Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
South Africa: Tel. +27 11 471 5401, Fax. +27 11 471 5398
South America: Tel. +55 11 821 2333, Fax. +55 11 829 1849
Spain: Tel. +34 33 01 6312, Fax. +34 33 01 4107
Sweden: Tel. +46 86 32 2000, Fax. +46 86 32 2745
Switzerland: Tel. +41 14 88 2686, Fax. +41 14 81 7730
Taiwan: Tel. +886 22 134 2451, Fax. +886 22 134 2874
Thailand: Tel. +66 23 61 7910, Fax. +66 23 98 3447
Turkey: Tel. +90 216 522 1500, Fax. +90 216 522 1813
Ukraine: Tel. +380 44 264 2776, Fax. +380 44 268 0461
United Kingdom: Tel. +44 208 730 5000, Fax. +44 208 754 8421
United States: Tel. +1 800 234 7381
Uruguay: see South America
Vietnam: see Singapore
Yugoslavia: Tel. +381 11 3341 299, Fax. +381 11 3342 553
For all other countries apply to: Philips Semiconductors,
Marketing Communications,
Building BE, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31 40 272 4825
Internet: http://www.semiconductors.philips.com
(SCA71)
© Philips Electronics N.V. 2001. All rights reserved.
9397 750 07897
Product specification
Rev. 01 — 16 January 2001
12 of 13
PSMN038-100K
Philips Semiconductors
N-channel enhancement mode field-effect transistor
Contents
1
2
3
4
5
6
7
7.1
8
9
10
11
12
13
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics. . . . . . . . . . . . . . . . . . . 4
Transient thermal impedance . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
© Philips Electronics N.V. 2001.
Printed in The Netherlands
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner.
The information presented in this document does not form part of any quotation or
contract, is believed to be accurate and reliable and may be changed without notice. No
liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or
intellectual property rights.
Date of release: 16 January 2001
Document order number: 9397 750 07897