SIDACtor ® Protection Thyristors High Surge Current Protection 5kA Series - TO-218 Description The 5kA Series are SIDACtor® devices designed to protect equipment located in high exposure environments from severe overvoltage transients. Packaged in a robust TO-218 package, the 5kA Series is ideal for use in CATV amplifiers, Telecom Base Station equipment and Cell Towers. Features and Benefits t Low voltage overshoot t Rugged TO-218 package t Low on-state voltage Agency Approvals t Does not degrade with use Agency t Fails short circuit when surged in excess of rating Agency File Number E133083 t 5000A 8x20 μs surge rating Pinout Designation Applicable Global Standards 2 1 2 3 (No Connection) t TIA-968-A t GR 1089 Intra-building t TIA-968-B t IEC 61000-4-5 t ITU K.20/21 Enhanced Level t YD/T 1082 t ITU K.20/21 Basic Level t YD/T 950 t YD/T 993 t GR 1089 Inter-building Schematic Symbol 1 2 Electrical Characteristics Part Number Marking VDRM @lDRM=5μA VS @100V/μs V min V max IH IS IT mA min mA max A max VT @IT=2.2 A Capacitance @1MHz, 2V bias V max pF min pF max P1500MEL P1500ME 140 180 50 800 2.2/25 4 400 650 P1900MEL P1900ME 140 220 50 800 2.2/25 4 400 650 P2300MEL P2300ME 180 260 50 800 2.2/25 4 350 600 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). - IT is a free air rating and heat sink is at 25A © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 188 Revised: February 22, 2011 SIDACtor ® Protection Thyristors High Surge Current Protection Surge Ratings IPP Series ITSM 50 / 60 Hz di/dt A min A min A/μs max 5000 400 630 8x20 1.2x50 1 E 2 Notes: 1 Current waveform in μs 2 Voltage waveform in μs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$ - The device must initially be in thermal equilibrium with -40°C < TJ <¡$ Thermal Conditions Package Symbol Parameter Value Unit TJØ Operating Junction Temperature Range UP °C TS Storage Temperature Range UP °C TC Maximum Case Temperature 100 °C R0JC* Thermal Resistance: Junction to Case 1.7 °C/W R0JA Thermal Resistance: Junction to Ambient 56 °C/W TO-218 2 1 2 3 (No Connection) *R0JC rating assumes the use of a heat sink and on state mode for extended time at 25 A, with average power dissipation of 29.125 W. V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (μs) -I Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 2.0 10 IH 8 6 25 °C 4 2 IH (TC = 25ºC) 12 Ratio of Percent of VS Change – % 14 0 -4 -6 -8 -40 -20 0 1.6 1.4 25°C 1.2 1.0 0.8 0.6 0.4 20 40 60 80 100 120 140 160 -40 Junction Temperature (TJ) – °C © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 1.8 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC 189 Revised: February 22, 2011 SIDACtor ® Protection Thyristors High Surge Current Protection Soldering Parameters Pb-Free assembly (see Fig. 1) ¡$ ¡$ 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) ¡$ - Temperature (tL) 60-150 secs. Peak Temp (TP) ¡$ Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed ¡$ Figure 1 TP tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS¡$ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Temp Cycling ¡$UP¡$NJOEXFMMVQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC¡$ 3)VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage ¡$IST.*-45%.FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP¡$NJOEXFMMTFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) ¡$3)BUNVQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat ¡$TFDT.*-45%.FUIPE Moisture Sensitivity Level 3)¡$ISTSFnPXDZDMFT ¡$1FBL +&%&$+45%-FWFM Body Material UL recognized epoxy meeting flammability classification 94V-0 Part Marking Part Numbering P xxx 0 ME L TYPE P: SIDACtor MEDIAN VOLTAGE RoHS COMPLIANT XXXXXXX IPP RATING xxxxx CONSTRUCTION VARIABLE PACKAGE TYPE © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 190 Revised: February 22, 2011 Part Number Code (Refer to Electrical Characteristics Table) Date Code SIDACtor ® Protection Thyristors High Surge Current Protection Dimensions — TO-218 TC Measurement Point U DIA. B A C Dimensions Tab is connected to PIN 2 F E D A B C D E F G H J K L M N P R U W W PIN 3 J P PIN 1 H M Q PIN 2 R G N 3 Times K L Notes: t t t t Mold flash shall not exceed 0.13 mm per side. Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Pin 3 has no connection. Tab is non-isolated (connects to middle pin). Packing Options Package Type M Description Packing Options Quantity 250(25 per TO-218 (ME) tube/10 tubes per Tube Pack box) Added Suffix Industry Standard N/A N/A Tube Pack Specification — TO-218 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 191 Revised: February 22, 2011 Inches Millimeters Min Max Min Max 0.810 0.610 0.178 0.055 0.487 0.635 0.022 0.075 0.575 0.211 0.422 0.058 0.045 0.095 0.008 0.161 0.085 0.835 0.630 0.188 0.070 0.497 0.655 0.029 0.095 0.625 0.219 0.437 0.068 0.055 0.115 0.016 0.165 0.095 20.57 15.49 4.52 1.40 12.37 16.13 0.56 1.91 14.61 5.36 10.72 1,47 1.14 2.41 0.20 4.1 2.17 21.21 16.00 4.78 1.78 12.62 16.64 0.74 2.41 15.88 5.56 11.10 6.73 1.40 2.92 0.41 4.2 2.42