PHILIPS 2N7002BKMB

83B
2N7002BKMB
SO
T8
60 V, single N-channel Trench MOSFET
Rev. 2 — 13 June 2012
Product data sheet
1. Product profile
1.1 General description
N-channel enhancement mode Field-Effect Transistor (FET) in a leadless ultra small
DFN1006B-3 (SOT883B) Surface-Mounted Device (SMD) plastic package using Trench
MOSFET technology.
1.2 Features and benefits
 Very fast switching
 Logic-level compatible
 Trench MOSFET technology
 Ultra thin package profile with 0.37
mm height
 ESD protection up to 2 kV
1.3 Applications
 Relay driver
 Low-side loadswitch
 High-speed line driver
 Switching circuits
1.4 Quick reference data
Table 1.
Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VDS
drain-source voltage
Tj = 25 °C
-
-
60
V
VGS
gate-source voltage
-20
-
20
V
-
-
450
mA
-
1
1.6
Ω
drain current
ID
VGS = 10 V; Tamb = 25 °C
[1]
Static characteristics
RDSon
[1]
drain-source on-state
resistance
VGS = 10 V; ID = 450 mA; Tj = 25 °C
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for drain 1 cm2.
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
2. Pinning information
Table 2.
Pinning information
Pin
Symbol Description
Simplified outline
1
G
gate
2
S
source
1
3
D
drain
2
Graphic symbol
D
3
Transparent
top view
G
SOT883B (DFN1006B-3)
S
017aaa255
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
2N7002BKMB
DFN1006B-3
Leadless ultra small plastic package; 3 solder lands;
body 1.0 x 0.6 x 0.37 mm
SOT883B
4. Marking
Table 4.
Marking codes
Type number
Marking code
2N7002BKMB
0000 0001
PIN 1 INDICATION
READING DIRECTION
READING EXAMPLE:
0111
1011
MARKING CODE
(EXAMPLE)
READING DIRECTION
006aac673
Fig 1.
DFN1006B-3 (SOT883B) binary marking code description
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
2 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
VDS
drain-source voltage
Tj = 25 °C
-
60
V
VGS
gate-source voltage
drain current
ID
total power dissipation
Ptot
20
V
VGS = 10 V; Tamb = 25 °C
-
450
mA
VGS = 10 V; Tamb = 100 °C
[1]
-
220
mA
Tamb = 25 °C; single pulse; tp ≤ 10 µs
peak drain current
IDM
-20
[1]
Tamb = 25 °C
-
1.8
A
[2]
-
360
mW
[1]
-
715
mW
-
2700
mW
Tsp = 25 °C
Tj
junction temperature
-55
150
°C
Tamb
ambient temperature
-55
150
°C
Tstg
storage temperature
-65
150
°C
Source-drain diode
source current
IS
Tamb = 25 °C
[1]
-
450
mA
HBM
[3]
-
2000
V
ESD maximum rating
electrostatic discharge voltage
VESD
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for drain 1 cm2.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[3]
Measured between all pins.
001aao121
120
001aao122
120
Pder
(%)
Ider
(%)
80
80
40
40
0
-75
-25
25
75
125
0
-75
175
-25
Tj (°C)
Fig 2.
Product data sheet
75
125
175
Tj (°C)
Normalized total power dissipation as a
function of junction temperature
2N7002BKMB
25
Fig 3.
Normalized continuous drain current as a
function of junction temperature
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
3 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
aaa-002590
10
ID
(A)
limit RDSon = VDS / ID
1
(1)
10-1
(2)
(3)
(4)
(5)
10-2
10-1
1
102
10
VDS (V)
IDM is single pulse
(1) tp = 1 ms
(2) DC; Tsp = 25 °C
(3) tp = 10 ms
(4) tp = 100 ms
(5) DC; Tamb = 25 °C; drain mounting pad 1 cm2
Fig 4.
Safe operating area; junction to ambient; continuous and peak drain currents as a function of drain-source
voltage
6. Thermal characteristics
Table 6.
Symbol
Rth(j-a)
Rth(j-sp)
Thermal characteristics
Parameter
thermal resistance
from junction to
ambient
Conditions
in free air
Min
Typ
Max
Unit
[1]
-
305
350
K/W
[2]
-
150
175
K/W
-
-
40
K/W
thermal resistance
from junction to solder
point
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for drain 1 cm2.
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
4 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
017aaa109
103
duty cycle = 1
Zth(j-a)
(K/W)
0.75
0.5
0.33
102
0.25
0.2
0.1
0.05
0
0.02
0.01
10
10−3
10−2
10−1
1
10
102
103
tp (s)
FR4 PCB, standard footprint
Fig 5.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
017aaa110
103
Zth(j-a)
(K/W)
duty cycle = 1
0.75
102
0.5
0.25
0.33
0.2
0.1
0
10
10−3
0.05
0.02
0.01
10−2
10−1
1
10
102
103
tp (s)
FR4 PCB, mounting pad for drain 1 cm2
Fig 6.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
5 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
7. Characteristics
Table 7.
Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Static characteristics
V(BR)DSS
drain-source
breakdown voltage
ID = 10 µA; VGS = 0 V; Tj = 25 °C
60
-
-
V
VGSth
gate-source threshold
voltage
ID = 250 µA; VDS = VGS; Tj = 25 °C
1.1
1.6
2.1
V
IDSS
drain leakage current
VDS = 60 V; VGS = 0 V; Tj = 25 °C
-
-
1
µA
VDS = 60 V; VGS = 0 V; Tj = 150 °C
-
-
10
µA
IGSS
gate leakage current
VGS = -20 V; VDS = 0 V; Tj = 25 °C
-
-
10
µA
VGS = 20 V; VDS = 0 V; Tj = 25 °C
-
-
10
µA
VGS = 10 V; ID = 450 mA; Tj = 25 °C
-
1
1.6
Ω
RDSon
gfs
drain-source on-state
resistance
forward
transconductance
VGS = 10 V; ID = 450 mA; Tj = 150 °C
-
2.2
3.5
Ω
VGS = 5 V; ID = 50 mA; Tj = 25 °C
-
1.3
2
Ω
VDS = 10 V; ID = 200 mA; Tj = 25 °C
-
550
-
mS
VDS = 30 V; ID = 300 mA; VGS = 4.5 V;
Tj = 25 °C
-
0.5
0.6
nC
-
0.2
-
nC
-
0.1
-
nC
Dynamic characteristics
QG(tot)
total gate charge
QGS
gate-source charge
QGD
gate-drain charge
Ciss
input capacitance
Coss
output capacitance
Crss
reverse transfer
capacitance
td(on)
turn-on delay time
tr
rise time
td(off)
tf
VDS = 10 V; f = 1 MHz; VGS = 0 V;
Tj = 25 °C
VDS = 50 V; RL = 250 Ω; VGS = 10 V;
RG(ext) = 6 Ω; Tj = 25 °C
-
33
50
pF
-
7
-
pF
-
4
-
pF
-
5
10
ns
-
6
-
ns
turn-off delay time
-
12
24
ns
fall time
-
7
-
ns
0.47
0.75
1.1
V
Source-drain diode
VSD
source-drain voltage
2N7002BKMB
Product data sheet
IS = 115 mA; VGS = 0 V; Tj = 25 °C
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
6 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
017aaa039
0.7
VGS = 4.0 V
ID
(A)
0.6
017aaa040
10−3
3.5 V
ID
(A)
3.25 V
0.5
10−4
(1)
0.4
(3)
(2)
3.0 V
0.3
10−5
2.75 V
0.2
2.5 V
0.1
0.0
0.0
1.0
2.0
3.0
4.0
10−6
0.0
1.0
2.0
VDS (V)
3.0
VGS (V)
Tj = 25 °C
Tj = 25 °C; VDS = 5 V
(1) minimum values
(2) typical values
(3) maximum values
Fig 7.
Output characteristics: drain current as a
function of drain-source voltage; typical values
017aaa041
6.0
Fig 8.
Sub-threshold drain current as a function of
gate-source voltage
017aaa042
6.0
RDSon
(Ω)
RDSon
(Ω)
(1)
4.0
4.0
(2)
(3)
2.0
(1)
2.0
(4)
(2)
(5)
0.0
0.0
0.2
0.4
0.6
0.8
1.0
0.0
0.0
2.0
ID (A)
Tj = 25 °C
ID = 500 mA
(1) VGS = 3.25 V
(1) Tj = 150 °C
(2) VGS = 3.5 V
(2) Tj = 25 °C
4.0
6.0
8.0
10.0
VGS (V)
(3) VGS = 4 V
(4) VGS = 5 V
(5) VGS = 10 V
Fig 9.
Drain-source on-state resistance as a function
of drain current; typical values
2N7002BKMB
Product data sheet
Fig 10. Drain-source on-state resistance as a function
of gate-source voltage; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
7 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
017aaa043
1.0
aaa-002591
2.4
ID
(A)
a
0.8
(1)
1.8
(2)
0.6
1.2
0.4
0.6
0.2
0.0
0.0
1.0
2.0
3.0
4.0
5.0
VGS (V)
0.0
-60
0
60
120
180
Tj (°C)
VDS > ID x RDSon
(1) Tj = 25 °C
(2) Tj = 150 °C
Fig 11. Transfer characteristics: drain current as a
function of gate-source voltage; typical values
aaa-002592
3.0
Fig 12. Normalized drain-source on-state resistance as
a function of junction temperature; typical
values
017aaa046
102
VGS(th)
(V)
(1)
C
(pF)
(1)
2.0
(2)
(2)
10
(3)
(3)
1.0
0.0
-60
0
60
120
180
1
10−1
1
Tj (°C)
VDS (V)
ID = 0.25 A; VDS = VGS
f = 1 MHz; VGS = 0 V
(1) maximum values
(1) Ciss
(2) typical values
(2) Coss
(3) minimum values
(3) Crss
Fig 13. Gate-source threshold voltage as a function of
junction temperature
2N7002BKMB
Product data sheet
102
10
Fig 14. Input, output and reverse transfer capacitances
as a function of drain-source voltage; typical
values
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
8 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
017aaa047
5.0
VDS
VGS
(V)
ID
4.0
VGS(pl)
3.0
VGS(th)
VGS
2.0
QGS1
QGS2
QGS
1.0
QGD
QG(tot)
003aaa508
0.0
0.0
0.2
0.4
0.6
0.8
QG (nC)
ID = 300 mA; VDS = 30 V; Tj = 25 °C
Fig 15. Gate-source voltage as a function of gate
charge; typical values
Fig 16. Gate charge waveform definitions
017aaa048
1.2
IS
(A)
0.8
(1)
(2)
0.4
0.0
0.0
0.4
0.8
1.2
VSD (V)
VGS = 0 V
(1) Tj = 150 °C
(2) Tj = 25 °C
Fig 17. Source current as a function of source-drain voltage; typical values
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
9 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
8. Test information
P
t2
duty cycle δ =
t1
t2
t1
t
006aaa812
Fig 18. Duty cycle definition
9. Package outline
0.65
0.55
0.40
0.34
0.35
0.20
0.12
1
0.04 max
2
0.30
0.22
1.05
0.65
0.95
0.30
0.22
3
0.55
0.47
Dimensions in mm
11-11-02
Fig 19. Package outline SOT883B (DFN1006B-3)
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
10 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
10. Soldering
Footprint information for reflow soldering
SOT883B
1.3
0.7
R0.05 (8x)
0.9
0.6
0.7
0.25
(2x)
0.3
(2x)
0.3
0.4
(2x)
0.4
solder land
solder land plus solder paste
solder paste deposit
solder resist
occupied area
Dimensions in mm
sot883b_fr
Fig 20. Reflow soldering footprint for SOT883B (DFN1006B-3)
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
11 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
11. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
2N7002BKMB v.2
20120613
Product data sheet
-
2N7002BKMB v.1
Modifications:
2N7002BKMB v.1
2N7002BKMB
Product data sheet
•
7 “Characteristics”: RDSon condition corrected
20120511
Product data sheet
-
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
-
© NXP B.V. 2012. All rights reserved.
12 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
12. Legal information
12.1 Data sheet status
Document status[1] [2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term 'short data sheet' is explained in section "Definitions".
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URLhttp://www.nxp.com.
12.2 Definitions
Preview — The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
NXP Semiconductors does not give any representations or warranties as to
the accuracy or completeness of information included herein and shall have
no liability for the consequences of use of such information.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with theTerms and conditions of commercial sale of NXP Semiconductors.
2N7002BKMB
Product data sheet
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
13 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published athttp://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12.4 Trademarks
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
Adelante,Bitport,Bitsound,CoolFlux,CoReUse,DESFire,EZ-HV,FabKey,G
reenChip,HiPerSmart,HITAG,I²C-bus
logo,ICODE,I-CODE,ITEC,Labelution,MIFARE,MIFARE Plus,MIFARE
Ultralight,MoReUse,QLPAK,Silicon
Tuner,SiliconMAX,SmartXA,STARplug,TOPFET,TrenchMOS,TriMedia
andUCODE — are trademarks of NXP B.V.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
HD Radio andHD Radio logo — are trademarks of iBiquity Digital
Corporation.
13. Contact information
For more information, please visit:http://www.nxp.com
For sales office addresses, please send an email to:[email protected]
2N7002BKMB
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 June 2012
© NXP B.V. 2012. All rights reserved.
14 of 15
2N7002BKMB
NXP Semiconductors
60 V, single N-channel Trench MOSFET
14. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
12.1
12.2
12.3
12.4
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1
General description . . . . . . . . . . . . . . . . . . . . . .1
Features and benefits . . . . . . . . . . . . . . . . . . . . .1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Quick reference data . . . . . . . . . . . . . . . . . . . . .1
Pinning information . . . . . . . . . . . . . . . . . . . . . . .2
Ordering information . . . . . . . . . . . . . . . . . . . . . .2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3
Thermal characteristics . . . . . . . . . . . . . . . . . . .4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Test information . . . . . . . . . . . . . . . . . . . . . . . . .10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .12
Legal information. . . . . . . . . . . . . . . . . . . . . . . .13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Contact information. . . . . . . . . . . . . . . . . . . . . .14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 13 June 2012
Document identifier: 2N7002BKMB