5.7” VGA Touch Screen LCD Kit DK-57VTS-LPC1788 For the NXP LPC1788 Highlights SOMDIMM – CPU Module based on SODIMM form factor (Dual Inline Memory Module) o LPC1788 120MHz Cortex-M3 based microcontroller o 512KB of Internal FLASH, 96KB of Internal SRAM, 4KB of Internal EEPROM 8MB of External SDRAM o 10/100 Ethernet PHY o Mini-JTAG Debug Connector CARRIER – Generic Carrier Board for CPU and LCD Modules o 200-pin SOMDIMM Socket, supporting various processor modules o 10/100 Ethernet Port, USB Host and Device ports o One CAN port (Male DB9), One RS-232 port (Male DB9), External I2C interface o 3-axis Digital Accelerometer & Temperature Sensor o Real-time Clock with SuperCap backup o TFT interface for Graphics LCD displays up to 1024x768 resolution, 18-bit color o Flexible Power Supply input can be wall supply or 5V USB LCDCARRIER o 5.7” VGA Display (640 x 480) with Touch Screen Interface o Optional 3.5” QVGA board, up to 10.4” XGA Board Software Included o FreeRTOS Operating System o uEZ® Rapid Development Platform o Complete COM Drivers and APIs with documentation Supplied with easy-to-use application documents for all hardware and software Platform is based on a modular design for maximum flexibility Additional CPU DIMM and LCD Carrier boards under development The DK-57VTS-LPC1788 is optimized to save development time in typical embedded control applications. The modular format uses a base Carrier Board, a core CPU SOMDIMM and an LCD Carrier Board. The base Carrier Board includes expansion connectors for added flexibility and a range of configurations. FDI offers low cost customization services for customer specific hardware, software or packaging applications at volumes of 500 units or more. Features SOMDIMM-LPC1788 Description The SOMDIMM-LPC1788 includes an NXP LPC1788 Cortex-M3 based microcontroller running the open source uEZ® +FreeRTOS software platform. The LPC2478 has 512KB of internal Flash memory, 96KB of internal SRAM, a 10/100 Ethernet Media Access Controller (MAC), a USB full speed device/host/OTG controller, four UARTs, two CAN channels and a collection of serial communications interfaces. The SOMDIMM-LPC1788 also includes 8MB of external SDRAM. Actual PCB dimensions are 2.66” x 1.89” Software Included μEZ™ (pronounced Muse) is an open source rapid development platform that supplies application developers with an extensive library of open source software, drivers, and processor support - all under a common framework. μEZ™ allows companies to focus on innovation and their value-added applications while minimizing development time and maximizing software reuse. The diagram below shows a typical embedded application stack. The μEZ™ components comprise three primary categories to simplify embedded application development: Operating System Abstraction Layer (μEZ® OSAL) Sub-system drivers (ex: μEZ® TCP/IP, μEZ™ USB, μEZ® Driver) Hardware Abstraction Layer (μEZ® HAL) Ordering Information Part Number: DK-57VTS-LPC1788 NXP Part Number: OM11xxx Order Online at: www.mouser.com Warranty: 30-day money back guarantee Phone 256-883-1240 Fax 256-883-1241 [email protected] www.teamfdi.com Kit Contents: - SOMDIMM-LPC1788 Board - CARRIER Board - LCDCARRIER Board & 5.7” VGA LCD Touch Screen - 5VDC, 2.3A North American Power Supply - USB and Ethernet Cables - Segger JTAG Debugger with cables Download Users Manual, documents, schematics, and software examples at: www.teamfdi.com/SOMDIMM-LPC1788 Rev 1 1/14/2011 All brand names and product names are trademarks or registered trademarks of their respective holder