21.39 [.842] 31.12 [1.225] 8 1 8 13.80 [.543] 1 3.20±0.30 [.126±.012] 13.97 [.550] 10.89 [.429] 25.40±0.13 [1.000±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 24.13 [.950] 12.70 [.500] 2.54 [.100] 2.54 [.100] 10.16 [.400] 1.27 [.050] ˚.035±.003] X16 8 1 1 ˚.063±.003] X3 25.40 [1.000] 2.73 [.107] 2.73 [.107] 3.68 [.145] ˚1.60±0.07 [ ˚.128±.003] X2 10.16 [.400] ˚3.25±0.07 [ 8 8.89 [.350] ˚0.89±.07 [ MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE NOTE 1. ONE REAR SHIELD TAB CENTERED NOTE 2: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) CONTACT FINISH: Au, 0.8µm [30µin] TERMINAL FINISH: Sn Information: MECHANICAL CHARACTERISTICS DIELECTRIC WITHSTANDING VOLTAGE: 1000 Vrms MIN, 60Hz INSULATION RESISTANCE: 500 MEGAOHMS MIN CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TERMPERATURE: 0˚C TO 70˚C - in mm [in] Consider protection memo from DIN 34 CURRENT/VOLTAGE: 150 Vac AT 1.5 AMPS MAX AT 25˚C 2:1 All Dimensions DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS Scale Tolerances All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8P8C, 1X2, INTEGRATED MAGNETICS ERNI Components - - Rev. Date 203154 CHESTER, VA U.S.A. Group/Type MAXMJ I ELECTRICAL SCHEMATICS 10/100 BASE TX - M3B01 ELEKTRISCHES DIAGRAMM CABLE PCB P1 J1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 J4,5 GND P8 J7,8 2X 75 W RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.89 [.586] 0.38±0.10 [.015±.004] 32.22±0.20 [1.269±.008] TOP OF PCB LP MAGNETICS SPECIFICATIONS @ 25˚C TURNS RATIO: (P1-P2:J1-J2) 1CT: 1±3% (P3-P6:J3-J6) 1CT: 1±3% 350 µH MIN (P1-P2, P3-P6) DCR (P1-P2, P3-P6) INSERTION LOSS: 0.1-100 MHz 0.9 W MAX. -1.1 dB MAX RETURN LOSS: 0.5-30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60-80 MHz -12 dB MIN CROSSTALK (0.1-100 MHz) -40 dB MIN CMR (0.1-100 MHz) -40 dB TYP ISOLATION 1500 Vrms Consider protection memo from DIN 34 OCL (100 KHz, 0.1 Vrms, 8 mA) Information: Scale Tolerances 2:1 - All Dimensions - in mm [in] All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8P8C, 1X2, INTEGRATED MAGNETICS ERNI Components Rev. Date 203154 CHESTER, VA U.S.A. Group/Type MAXMJ I