http://www.commagility.com/downloads/CA-AMC-2C6678L.pdf

AMC-2C6678L
DATASHEET
A high performance
AMC card featuring
two TMS320C6678
DSPs with high
speed, flexible I/O
16 floating and
fixed point DSP
cores, ideal for a
wide range of high
performance DSP
applications
High bandwidth,
flexible backplane
communications
plus front panel
Gigabit Ethernet
A total of 4GB DDR3
SDRAM as standard,
2GB per DSP
KEY FEATURES
RESULTING BENEFITS
 Two TMS320C6678 octal-core DSPs
 The latest high performance TI SoC DSPs
with a total of 16 floating-point cores
 DDR3 SDRAM for each DSP
 Latest external memory technology with
multiple high bandwidth buses
 Flash memory
 Stores DSP boot code
 PCI Express backplane interface and
switch
 High bandwidth data transfers between
all DSPs and other AMC cards
 Backplane Serial RapidIO
 High bandwidth data transfers in a
RapidIO system
 Broadcom BCM5389 Ethernet switch
 Gigabit Ethernet to all main devices,
backplane and front panel
 Single width mid-size PICMG AMC.0
R2.0 Advanced Mezzanine Card
 Works with industry standard MicroTCA
chassis, as well as AdvancedTCA carrier
cards; can also run standalone
The AMC-2C6678L is a new high performance DSP card in the mid-size
Advanced Mezzanine Card form factor. It is powered by two of the latest
Texas Instruments TMS320C6678 fixed and floating point octal core DSPs
running at 1.25 GHz core speed, giving a total performance of 320 GFLOPS
and 640 GMACS, and is ideal for a range of high performance applications
including image sensor processing, telecoms and stepper control. In addition
it can be used for DSP based acceleration and voice/video applications on
AdvancedTCA cards.
The card features a wide range of connectivity to the backplane and front
panel. The PCI Express and Gigabit Ethernet connectivity use on-board
switches for maximum flexibility and access to all DSPs on the card, while the
SRIO link is directly connected to one DSP and shared using Hyperlink.
Additional debug support is provided via on-board serial port connectors, plus
RS-232 and JTAG debug via the CommAgility AMC-BB Debug Breakout Board.
CommAgility Ltd
[email protected]
www.commagility.com
Tel: +44 1509 228866
HARDWARE SPECIFICATIONS
DSP: 2x TMS320C6678 DSPs, each with:
 8x C66x DSP cores
 1.25 GHz clock speed
 2 Gbyte x64 DDR3-1600 SDRAM
 Hyperlink50 bus (to other DSP)
 Single Gigabit Ethernet link to switch
 8 Gbit/s, 2x PCI Express link to switch
 16 Gbit/s, 4x SRIO link (DSP0 only)
 JTAG debug and RS-232 ports
 128 Mbyte of x16 FLASH (DSP0 only)
Debug:
 Breakout board for JTAG debug and
DSP/MMC RS-232 ports
 RS-232 connections for DSPs, via
headers or breakout board
Module Management Controller:
 AMC.0 IPMB_L, FRU EEPROM data
 Power & reset, health monitoring
 Full hot swap and e-keying support
ENVIRONMENT/EMC/SAFETY
 Operating temp: 0-40°C ambient
 Power consumption: up to 30W max
Backplane I/O:
 Designed for NEBS/ETSI compliance
 AMC.2 compliant Gigabit Ethernet to
when used in appropriate chassis
AMC Ports 0 and 1 using Broadcom
 2004/108/EC and FCC EMC compliant
BCM5389 switch
 2011/65/EU RoHS, 2012/19/EU WEEE
 AMC.1 compliant 4x PCI Express Gen 3
and 2006/95/EC LVD compliant
link to AMC ports 4-7, up to 31.5Gbit/s,
using PLX PEX8713 switch
 AMC.4 compliant 4x SRIO Gen 2 link to SOFTWARE
AMC ports 8-11, up to 16Gbit/s, direct
DSP:
from DSP
 Volume build option for SRIO instead of  Full Board Support Libraries; IP stack
with Telnet/TFTP for Ethernet based
PCIe to AMC ports 4-7
board control and upgrade.
 AMC TCLKs routed to DSPs via glue

3L Diamond available for additional
logic
control and management of multiple
tasks across all 16 DSP cores
Front panel I/O:
 RJ-45 port for Gigabit Ethernet
 RS-232, I2C and SPI go to a header
allowing for front panel expansion
 Bi-colour DSP LEDs
AMC-2C6678L
Form Factor:
 Single-width mid-size AMC (Advanced
Mezzanine Card)
 AMC.0 Rev 2.0 compliant
Management: Full embedded suite
based on Pigeon PointTM Software.
Contact CommAgility for further details
of software partners.
OEM PARTNERSHIP
SERVICES:
IN DEVELOPMENT:
Support and training;
hardware customisation; software and
FPGA development.
IN PRODUCTION:
lead-time reduction;
extended warranty;
and repair; quick
turn repairs and/or
spares stocking.
EXTENDED LIFE:
obsolescence management; guaranteed
lifecycle; Escrow.
CommAgility Ltd, Loughborough, UK
Tel: +44 1509 228866
[email protected]
www.commagility.com
Datasheet describes products in development;Information subject to change AMC-2C6678L P1/0913
LICENSING is offered
for high volume
projects.