Photoelectric sensors FSE 200C1002 Through beam fiber optics dimension drawing 1 15 L 3 3 ø 2,2 M4 ø 3 SW 7 20 15 20 L general data photo particular characteristics standard type through beam sensor actual range Sb 1200 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) cylindrical threaded (axial) width / diameter (head) 4 mm height / length (head) 20 mm material (head) brass bending radius 15 mm cable jacket diameter 2,2 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 130 mm (HS) - 900 mm (nL) 1200 mm (HP) FVDK 67 (2 adjustable outputs) 130 mm (HS) - 900 mm (nL) 1200 mm (HP) FVDK 67 (master/slave) 130 mm (HS) - 900 mm (nL) 1200 mm (HP) FVDK 66 (standard version) - 220 mm (FT) 390 mm (nL) - FVDK 66 (master/slave) - 220 mm (FT) 390 mm (nL) - FVDK 22 - - 320 mm (nL) - FVDK 12 - - 320 mm (nL) - FVDK 12 (fast version) 300 mm (HS) - - - FVDK 10 - - 160 mm (nL) - FWDK 84 (analog output) - - 90 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015