MSD130 Glass Passivated Three Phase Rectifier Bridge VRRM 800 to 1800V ID 130 Amp Applications y y y y Circuit + MSD Three phase rectifiers for power supplies Rectifiers for DC motor field supplies Battery charger rectifiers Input rectifiers for variable frequency drives Features ~ ~ ~ y y y - y Three phase bridge rectifier Blocking voltage: 800 to 1800V Heat transfer through aluminum oxide DCB ceramic isolated metal baseplate Glass passivated chip Module Type TYPE VRRM VRSM MSD130 – 08 MSD130 – 12 MSD130 – 16 MSD130 – 18 800V 1200V 1600V 1800V 900V 1300V 1700V 1900V Maximum Ratings Symbol Conditions Values Units ID Tc=100℃ 130 A IFSM t=10mS Tvj =45℃ 1200 A t=10mS Tvj =45℃ a.c.50Hz;r.m.s.;1min 7200 A2s 3000 -40 to 150 V 2 it Visol Tvj Tstg -40 to 125 ℃ Mt To terminals(M6) 5±15% ℃ Nm Ms To heatsink(M6) 5±15% Nm Weight Module 230 g Thermal Characteristics Symbol Conditions Values Units Rth(j-c) Per diode 0.9 ℃/W Rth(c-s) Module 0.03 ℃/W Conditions Values Units T=25℃ IFM =300A 1.8 V Tvj =25℃ VRD=VRRM ≤0.3 ≤5 mA mA Electrical Characteristics Symbol VFM IRD MSD130-Rev 1 Dec, 2009 Tvj =150℃ VRD=VRRM www.microsemi.com 1/3 MSD130 Performance Curves 400 A 300 W 300 Typ. 200 200 125℃ 25℃ 100 100 Pvtot IF 0 0 VF 0.5 1.0 1.5 0 2.0 V 0 ID 20 60 80 100 120 140 A Fig2. Power dissipation Fig1. Forward Characteristics 1.0 ℃/ W 40 2000 A Zth(j-C) 50Hz 1500 0.5 1000 500 0 0 0.001 0.01 0.1 1 10 100 S 1 10 cycles 100 Fig4. Max Non-Repetitive Forward Surge Current Fig3. Transient thermal impedance 200 A 160 120 80 40 ID 0 0 Tc MSD130-Rev 1 Dec, 2009 50 100 150 °C www.microsemi.com 2/3 MSD130 Fig5.Forward Current Derating Curve Package Outline Information CASE-M3 Dimensions in mm MSD130-Rev 1 Dec, 2009 www.microsemi.com 3/3