CY3274 - Release Notes.pdf

Release Notes
CY3274 High Voltage Powerline Communication
Development Kit
Release Date, July 23, 2014
Thank you for your interest in the CY3274 High-Voltage Powerline Communication (PLC)
Development Kit. This document lists kit contents, installation requirements, limitations, and
known issues. It also provides links for updates, support, and additional information.
System Requirements and Recommendations
To evaluate this kit, a second high-voltage CY3274 PLC kit is required. For information on this kit,
go to http://www.cypress.com/go/CY3274.
The following are necessary to run the PLC Control Panel GUI for evaluating the PLC kits or to
run the PSoC Designer™ development tool for developing your host application on the
CY8CPLC20 device. If your computer does not have the minimum versions of .NET Framework
and Windows Installer, the CY3274 PLC Kit Installer automatically installs them for you.
Hardware/Operating System Requirements
Processor speed
RAM
Free hard drive space
Screen resolution
USB
Windows XP (SP2 or higher), Vista, Windows 7, or
Windows 8
Software Prerequisites
Microsoft Internet Explorer
Adobe Reader
Windows Installer
.NET Framework
PSoC Programmer
PSoC Designer
Minimum
2 GHz
2 GB
1.3 GB
1024x768
Full Speed

Minimum
7
6
3.1
2.5
3.18
Recommended
2 GHz Dual
Core
3 GB
1.3 GB
1280x1024
2.0 Hi-Speed

Recommended
9+
5.4
Kit Contents
The CY3274 High-Voltage Powerline Communication Development Kit includes:

CY3274 Quick Start Guide

CY3274 PLC development board

AC power cable

MiniProg1 to program CY8CPLC20

25 jumper wires

LCD module

USB-I2C bridge
July 23, 2014
Document Number 001-67145 Rev. *D
-1-

Retractable USB cable

Five CY8CPLC20-28PVXI SSOP device samples
Installation
To install the CY3274PLC Kit contents, download the installer package from
http://www.cypress.com/go/CY3274 and start the installation. Follow the onscreen procedures to
complete the installation.
Updates
Go to http://www.cypress.com/go/CY3274 for the latest software downloads and documents.
July 23, 2014
Document Number 001-67145 Rev. *D
-2-
Limitations and Known Issues
The following table lists the known issue with the CY3274 Rev. ** board.
Defect
Workaround
On the I C and ISSP header, the
silkscreen labels for the data (marked
“D”) and clock (marked “C”) pins are
swapped. However, the pins have the
correct orientation for working with the
MiniProg and CY3240 USB-I2C bridge.
If using these headers for probing, note that
the “D” pin has the clock and the “C” pin has
the data.
2
1.
Technical Support
For assistance, go to http://www.cypress.com/go/support or contact our customer support at
+1(800) 541-4736 Ext. 2 (in the USA), or +1 (408) 943-2600 Ext. 2 (International).
Additional Information




For more information on PLC (application notes, software, kits, etc.), visit
http://www.cypress.com/go/plc
For more information about PSoC Designer functionality and releases, review the user
guide
and
release
notes
on
the
PSoC
Designer
web
page:
http://www.cypress.com/go/psocdesigner
For more information about PSoC Programmer, supported hardware, and COM layer,
visit the PSoC Programmer web page: http://www.cypress.com/go/psocprogrammer
For a list of trainings on PSoC Designer, visit http://www.cypress.com/?rID=40543
July 23, 2014
Document Number 001-67145 Rev. *D
-3-
Cypress Semiconductor
198 Champion Ct.
San Jose, CA 95134-1709 USA
Tel: 408.943.2600
Fax: 408.943.4730
Application Support Hotline: 425.787.4814
www.cypress.com
© Cypress Semiconductor Corporation, 2011-2014. The information contained herein is subject to change without notice.
Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in
a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not
warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless
pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as
critical components in life-support systems where a malfunction or failure may reasonably be expected to result in
significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the
manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
PSoC Designer™, Programmable System-on-Chip™, and PSoC Express™ are trademarks and PSoC® is a registered
trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property
of the respective corporations.
This Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected
by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international
treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use,
modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of
creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or
representation of this Source Code except as specified above is prohibited without the express written permission of
Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials
described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit
described herein. Cypress does not authorize its products for use as critical components in life-support systems where a
malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’
product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so
indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
July 23, 2014
Document Number 001-67145 Rev. *D
-4-