APT39M60J 600V, 42A, 0.11Ω Max N-Channel MOSFET S S Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. D G SO 2 T- 27 "UL Recognized" file # E145592 IS OTO P ® D APT39M60J Single die MOSFET G S TYPICAL APPLICATIONS FEATURES • Fast switching with low EMI/RFI • PFC and other boost converter • Low RDS(on) • Buck converter • Ultra low Crss for improved noise immunity • Two switch forward (asymmetrical bridge) • Low gate charge • Single switch forward • Avalanche energy rated • Flyback • RoHS compliant • Inverters Absolute Maximum Ratings Symbol ID Ratings Parameter Continuous Drain Current @ TC = 25°C 42 Continuous Drain Current @ TC = 100°C 26 Unit A IDM Pulsed Drain Current VGS Gate-Source Voltage ±30 V EAS Single Pulse Avalanche Energy 2 1580 mJ IAR Avalanche Current, Repetitive or Non-Repetitive 28 A 210 1 Thermal and Mechanical Characteristics Min Typ Max Unit W PD Total Power Dissipation @ TC = 25°C 480 RθJC Junction to Case Thermal Resistance 0.26 RθCS Case to Sink Thermal Resistance, Flat, Greased Surface TJ,TSTG Operating and Storage Junction Temperature Range VIsolation RMS Voltage (50-60hHz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) WT Torque Package Weight Terminals and Mounting Screws. Microsemi Website - http://www.microsemi.com °C/W 0.15 -55 150 °C V 2500 1.03 oz 29.2 g 10 in·lbf 1.1 N·m Rev F 7-2011 Characteristic 050-8087 Symbol Static Characteristics TJ = 25°C unless otherwise specified Symbol Parameter Test Conditions Min VBR(DSS) Drain-Source Breakdown Voltage VGS = 0V, ID = 250μA 600 ∆VBR(DSS)/∆TJ Drain-Source On Resistance VGS(th) Gate-Source Threshold Voltage ∆VGS(th)/∆TJ VGS = 10V, ID = 28A 3 Zero Gate Voltage Drain Current IGSS Gate-Source Leakage Current Dynamic Characteristics Forward Transconductance Ciss Input Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance VDS = 600V TJ = 25°C VGS = 0V TJ = 125°C Typ Max 0.57 0.09 4 -10 0.11 5 100 500 ±100 VGS = ±30V Unit V V/°C Ω V mV/°C μA nA TJ = 25°C unless otherwise specified Parameter gfs 3 VGS = VDS, ID = 2.5mA Threshold Voltage Temperature Coefficient IDSS Symbol Reference to 25°C, ID = 250μA Breakdown Voltage Temperature Coefficient RDS(on) APT39M60J Min Test Conditions VDS = 50V, ID = 28A 4 Effective Output Capacitance, Charge Related Co(er) 5 Effective Output Capacitance, Energy Related Max 55 11300 115 1040 VGS = 0V, VDS = 25V f = 1MHz Co(cr) Typ Unit S pF 550 VGS = 0V, VDS = 0V to 400V 285 Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge td(on) Turn-On Delay Time Resistive Switching Current Rise Time VDD = 400V, ID = 28A tr td(off) tf Turn-Off Delay Time 280 60 120 65 75 190 60 VGS = 0 to 10V, ID = 28A, VDS = 300V RG = 2.2Ω 6 , VGG = 15V Current Fall Time nC ns Source-Drain Diode Characteristics Symbol IS ISM Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Diode Forward Voltage ISD = 28A, TJ = 25°C, VGS = 0V trr Reverse Recovery Time ISD = 28A 3 Qrr Reverse Recovery Charge Peak Recovery dv/dt Typ Max Unit 42 A G VSD dv/dt Min D 210 S diSD/dt = 100A/μs, TJ = 25°C ISD ≤ 28A, di/dt ≤1000A/μs, VDD = 100V, TJ = 125°C 1.0 745 19 V ns μC 8 V/ns 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 4.03mH, RG = 25Ω, IAS = 28A. 3 Pulse test: Pulse Width < 380μs, duty cycle < 2%. 050-8087 Rev F 7-2011 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.10E-7/VDS^2 + 4.60E-8/VDS + 1.72E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. APT39M60J 250 V GS 90 = 10V T = 125°C J 80 V TJ = -55°C ID, DRIAN CURRENT (A) 150 TJ = 25°C 100 50 TJ = 150°C 60 6V 50 40 30 5.5V 20 0 0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) 5V 4.5V 0 NORMALIZED TO ID, DRAIN CURRENT (A) 2.0 1.5 1.0 0.5 140 120 TJ = -55°C 100 TJ = 25°C 80 TJ = 125°C 60 40 20 0 0 -55 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 3, RDS(ON) vs Junction Temperature 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics 20,000 TJ = -55°C Ciss 10,000 TJ = 25°C 80 C, CAPACITANCE (pF) TJ = 125°C 60 40 1000 Coss 100 Crss 20 0 0 16 10 20 30 40 50 60 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 100 200 300 400 500 600 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 12 VDS = 120V 10 VDS = 300V 8 6 VDS = 480V 4 2 0 0 200 ID = 28A 14 0 10 70 50 100 150 200 250 300 350 400 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 180 160 140 120 TJ = 25°C 100 80 TJ = 150°C 60 40 20 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage Rev F 7-2011 gfs, TRANSCONDUCTANCE 250μSEC. PULSE TEST @ <0.5 % DUTY CYCLE 160 100 VGS, GATE-TO-SOURCE VOLTAGE (V) VDS> ID(ON) x RDS(ON) MAX. 180 VGS = 10V @ 28A 2.5 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics 200 ISD, REVERSE DRAIN CURRENT (A) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE Figure 1, Output Characteristics 3.0 = 7&8V GS 10 TJ = 125°C 0 70 050-8087 ID, DRAIN CURRENT (A) 200 APT39M60J 250 250 100 IDM ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 100 10 13μs 100μs 1ms Rds(on) 10ms 1 100ms DC line 0.1 TJ = 125°C TC = 75°C 1 10 13μs 100μs Rds(on) 1ms 10ms TJ = 150°C TC = 25°C 1 0.1 10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area IDM 100ms DC line Scaling for Different Case & Junction Temperatures: ID = ID(T = 25°C)*(TJ - TC)/125 C 1 10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 0.25 D = 0.9 0.20 0.7 0.15 0.5 0.10 0.3 Note: P DM ZθJC, THERMAL IMPEDANCE (°C/W) 0.30 t1 t2 t1 = Pulse Duration t 0.1 0.05 SINGLE PULSE 0.05 0 10-5 Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration SOT-227 (ISOTOP®) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 4.0 (.157) 4.2 (.165) (2 places) 050-8087 Rev F 7-2011 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) * Source 30.1 (1.185) 30.3 (1.193) 8.9 (.350) 9.6 (.378) Hex Nut M 4 (4 places ) 0.75 (.030) 0.85 (.033) 12.6 (.496) 12.8 (.504) 25.2 (0.992) 25.4 (1.000) 1.95 (.077) 2.14 (.084) Drai n * Emitter terminals are shorte d internally. Current handlin g capability is equal for either Source terminal . 38.0 (1.496) 38.2 (1.504) * Source Dimensions in Millimeters (Inches) Gate 1.0