1N3889 – 1N3891, 1N3893 Available on commercial versions Qualified Levels*: JAN, JANTX, and JANTXV FAST RECOVERY RECTIFIERS Qualified per MIL-PRF-19500/304* DESCRIPTION This 1N3889 – 1N3891 and 1N3893 family of rectifier devices are suitable for applications in DC power supplies, inverters, converters, choppers and ultrasonic systems as well as other applications. It can also be used as a free-wheeling diode. They are military qualified up to a JANTXV level on select part numbers and they are available in both standard and reverse polarities. Microsemi also offers numerous other products to meet higher and lower power voltage regulation applications. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • DO-203AA (DO-4) Package Very low forward voltage. Fast recovery time. Low thermal resistance. Both polarities available. JAN, JANTX, and JANTXV qualifications also available per MIL-PRF-19500/304. *(Excludes part number 1N3889.) RoHS compliant devices available by adding “e3” suffix. APPLICATIONS / BENEFITS • • • • Available in 12 or 20 amp current ratings. Short reverse recovery time. High surge capability. Hermetically sealed. MAXIMUM RATINGS @ TC = 25 ºC unless otherwise noted Parameters/Test Conditions Symbol Value Junction and Storage Temperature TJ & TSTG -65 to +175 Thermal Resistance Junction-to-Case non “A” “A” Reverse Voltage 1N3890 A/R/AR 1N3891 A/R/AR 1N3893 A/R/AR Working Peak Reverse Voltage 1N3889 A/R/AR 1N3890 A/R/AR 1N3891 A/R/AR 1N3893 A/R/AR Repetitive Peak Reverse Voltage 1N3889 A/R/AR 1N3890 A/R/AR 1N3891 A/R/AR 1N3893 A/R/AR Average Forward Current, 180 degrees conduction angle, 60 Hz, half sine wave non “A” @ TC = 100 ºC “A” Maximum Non-Repetitive Sinusoidal Surge Current @ TC = 100 ºC (8.3 ms, half sine) non “A” “A” RӨJC VR VRWM VRRM 2.0 1.5 100 200 400 50 100 200 400 50 100 200 400 o o C C/W V V (pk) V IO 12 20 A IFSM 175 250 A (pk) NOTES: 1. Derate linearly 2 % of IO /ºC for TC > 100 ºC, see Figure 5. T4-LDS-0143, Rev. 2 (120861) Unit ©2012 Microsemi Corporation MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 7 1N3889 – 1N3891, 1N3893 MECHANICAL and PACKAGING • • • • • • CASE: Hermetically sealed metal and glass case body with 10-32 UNF3A threaded stud. TERMINALS: Tin-lead plated or RoHS compliant matte-tin plating on nickel. Solder dipped eyelet. MARKING: Manufacturer's ID, part number, date code, polarity symbol. WEIGHT: 5 grams (approximate). Maximum Stud Torque: 10-15 inch pounds. See Package Dimensions on last page. PART NOMENCLATURE Applicable to 1N3889 only: 1N3889 A R (e3) JEDEC Registered Number (see Electrical Characteristics table) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Current Rating A = 20 Amps Blank = 12 Amps Polarity R = Anode to Stud Blank = Cathode to Stud Applicable to 1N3890, 1N3891 and 1N3893 only: JAN 1N3890 A R (e3) Reliability Level JAN = JAN level JANTX = JANTX level JANTXV = JANTXV level Blank = Commercial RoHS Compliance e3 = RoHS compliant (on commercial grade only) Blank = non-RoHS compliant Polarity R = Anode to Stud Blank = Cathode to Stud JEDEC Registered Number (see Electrical Characteristics table) Current Rating A = 20 Amps Blank = 12 Amps T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 2 of 7 1N3889 – 1N3891, 1N3893 SYMBOLS & DEFINITIONS Definition Symbol CJ IF(AV) IFSM IRM trr VFM VRRM VRWM Junction Capacitance: The junction capacitance in pF at a specified frequency. Average Forward Current: The average forward current dc value, no alternating component. Maximum Forward Surge Current: The forward current, surge peak or rated forward surge current. Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Repetitive Peak Reverse Voltage: The peak reverse voltage including all repetitive transient voltages but excluding all non-repetitive transient voltages. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV. ELECTRICAL CHARACTERISTICS @ TA = 25 ºC unless otherwise noted Type Typical Junction Capacitance CJ 1N3889(R) 115 pF (1) Average Forward Current IF(AV) Maximum Forward Voltage VFM Maximum Reverse Current IRM TC = 100 ºC TC = 25 oC TC = 25 oC TC = 150 oC 12 A 1.5 V @ IFM = 20 A (2) 10 µA @ VRRM 2 mA @ VRRM Maximum Reverse Recovery Time trr 200 ns (3) NOTES: 1. VR = 10 V, f = 1 Mhz, TJ = 25 ºC. 2. IFM = 38 A, TJ = 25 ºC. Pulse test: pulse width 300 µsec, duty cycle 2%. 3. IF = 1 A, VR = 30 A, di/dt = 25 A/µs, TC = 55 ºC. Parameters / Test Conditions Symbol Min. Max. Unit Forward Voltage IFM = 38 A, TC = 25 °C* VFM 1.5 V Forward Voltage IFM = 250 A, TC = 150 °C** VFM 2.75 V Reverse Current VRM = 100 V, TC = 25 °C VRM = 200 V, TC = 25 °C VRM = 400 V, TC= 25 °C 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR IRM 10 µA Reverse Current VRM = 100 V, TC = 150 °C VRM = 200 V, TC = 150 °C VRM = 400 V, TC = 150 °C 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR IRM 2 mA Reverse Recovery Time VRM = 30 V, IF = 1A, TC = 55 °C* 1N3890, 1N3891, 1N3893 1N3890A, 1N3891A,1N3893A / AR Trr 200 150 ns * Pulse test: Pulse width 300 µsec, duty cycle 2%. ** Pulse test: Pulse width 800 µsec. T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 3 of 7 1N3889 – 1N3891, 1N3893 Instantaneous Forward Current - Amperes GRAPHS Typical Reverse Current - mA Instantaneous Forward Voltage – Volts FIGURE 1 – Typical Forward Characteristics Reverse Voltage – Volts FIGURE 2 – Typical Reverse Characteristics T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 4 of 7 1N3889 – 1N3891, 1N3893 Junction Capacitance - pF GRAPHS (continued) Reverse Voltage – Volts Maximum Allowable Case Temperature - ºC FIGURE 3 – Typical Junction Capacitance Average Forward Current – Amperes FIGURE 4 – Forward Current Derating T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 5 of 7 1N3889 – 1N3891, 1N3893 Maximum Forward Current - Amps GRAPHS (continued) Maximum Case Temperature - ºC RӨJC (ºC/W) Figure 5 – Maximum Forward Current vs. Maximum Case Temperature Time (s) Figure 6 – Thermal Impedance for “A” type devices T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 6 of 7 1N3889 – 1N3891, 1N3893 PACKAGE DIMENSIONS Ltr Inch Min Dimensions Millimeters Max Min Max CD .424 10.77 CH .405 10.29 CH1 .020 G .060 HF .424 .437 10.77 11.10 HT .075 .175 1.90 4.44 OAH .065 0.51 1.65 .800 20.32 .163 .189 4.14 4.80 SL .422 .453 10.72 11.50 SP TD 9 1.52 OM T Notes 4 5, 6, 7, 8 .060 1.52 .250 6.35 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Angular orientation of this terminal is undefined. Square or radius on end of terminals is optional. 4. Diameter variations within these limits are permitted. 5. The ANSI thread reference is 0.190-32 UNF-2A. 6. Max pitch diameter of plated threads shall be basic pitch diameter 0.169 inch (4.29 mm) reference FED-STD-H28 (Screw Thread Standards for Federal Services.) 7. Units must not be damaged by torque of 15 inch-pounds applied to 0.190-32 UNF-2B nut assembled on thread. 8. Complete threads to extend to within 0.078 inch (1.98 mm) of the seating plane. 9. Terminal-end shape is unrestricted. 10. Reversed (anode to stud) units shall be marked with an “R” following the last digit in the type number. 11. Forward polarity (cathode to stud) marking is not shown. T4-LDS-0143, Rev. 2 (120861) ©2012 Microsemi Corporation Page 7 of 7