Preliminary Data Sheet No. PD60162J IR2106/IR21064 IR2107/IR21074 HIGH AND LOW SIDE DRIVER Features • Floating channel designed for bootstrap operation • • • • • • • • Product Summary Fully operational to +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from 10 to 20V Undervoltage lockout for both channels 5V Schmitt triggered input logic Matched propagation delay for both channels Logic and power ground +/- 5V offset. Lower di/dt gate driver for better noise immunity Outputs in phase with inputs (IR2106/IR21064) Outputs out of phase with inputs (IR2107/IR21074) Description The IR2106/IR21064/IR2107/IR21074 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. VOFFSET 600V max. IO+/- 120 mA / 250 mA VOUT 10 - 20V ton/off (typ.) 180 ns Delay matching 50 ns Packages 14 Lead SOIC 8 Lead SOIC 8 Lead PDIP 14 Lead PDIP Typical Connection up to 600V V CC VCC VB HIN HIN HIN/HIN LIN LIN LIN/LIN VS COM LO HO TO LOAD up to 600V IR21064/IR21074 IR2106/IR2107 HO VCC V CC VB HIN HIN LIN LIN HIN/HIN VS V SS V SS LIN/LIN COM LO TO LOAD IR2106/IR21064/IR2107/IR21074 Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units VB High side floating absolute voltage -0.3 625 VS High side floating supply offset voltage VB - 25 VB + 0.3 VHO High side floating output voltage VS - 0.3 VB + 0.3 VCC Low side and logic fixed supply voltage -0.3 25 VLO Low side output voltage -0.3 VCC + 0.3 VIN Logic input voltage (HIN & LIN - IR2106/IR21064) VSS - 0.3 VCC + 0.3 VCC - 25 VCC + 0.3 (HIN & LIN - IR2107/IR21074) VSS Logic ground (IR21064/IR21074 only) dVS/dt Allowable offset supply voltage transient PD Package power dissipation @ TA ≤ +25°C RthJA Thermal resistance, junction to ambient (8 lead PDIP) — 50 — 1.0 (8 lead SOIC) — 0.625 (14 lead PDIP) — 1.6 (14 lead SOIC) — 1.0 (8 lead PDIP) — 125 (8 lead SOIC) — 200 (14 lead PDIP) — 75 — 120 TJ Junction temperature (14 lead SOIC) — 150 TS Storage temperature -50 150 TL Lead temperature (soldering, 10 seconds) — 300 V V/ns W °C/W °C Recommended Operating Conditions The Input/Output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15V differential. Symbol Definition VB High side floating supply absolute voltage VS High side floating supply offset voltage Min. Max. VS + 10 VS + 20 Note 1 600 VB VHO High side floating output voltage VS VCC Low side and logic fixed supply voltage 10 20 VLO Low side output voltage 0 VCC VIN Logic input voltage (HIN & LIN - IR2106/IR21064) VSS VCC Logic ground (IR21064/IR21074 only) -5 5 Ambient temperature -40 125 (HIN & LIN - IR2107/IR21074) VSS TA Units V °C Note 1: Logic operational for VS of -5 to +600V. Logic state held for VS of -5V to -VBS. 2 www.irf.com IR2106/IR21064/IR2107/IR21074 Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15V, VSS = COM, CL = 1000 pF, TA = 25°C. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay — 180 270 VS = 0V toff Turn-off propagation delay — 170 250 VS = 0V or 600V MT Delay matching, HS & LS turn-on/off — 0 50 tr Turn-on rise time — 150 220 VS = 0V tf Turn-off fall time — 50 80 VS = 0V nsec Static Electrical Characteristics VBIAS (VCC , VBS ) = 15V, VSS = COM and TA = 25°C unless otherwise specified. The VIL, VIH and IIN parameters are referenced to VSS/COM and are applicable to the respective input leads: HIN and LIN (IR2106/IR21064) and HIN and LIN (IR2107/IR21074). The VO, IO and Ron parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol Definition VIH Logic “1” input voltage (IR2106/IR21064) Min. Typ. Max. Units Test Conditions 2.7 Logic “0” input voltage (IR2107/IR21074) VIL Logic “0” input voltage (IR2106/IR21064) Logic “1”input voltage (IR2107/IR21074) — VCC = 10V to 20V — — — 0.8 V VCC = 10V to 20V VOH High level output voltage, VBIAS - VO — 0.8 1.4 VOL Low level output voltage, VO — 0.3 0.6 IO = 20 mA ILK Offset supply leakage current — — 50 VB = VS = 600V IQBS Quiescent VBS supply current 20 60 150 IQCC Quiescent VCC supply current 50 120 240 IIN+ Logic “1” input bias current — 5 20 IO = 20 mA VIN = 0V or 5V mA µA VIN = 0V or 5V VIN = 5V (IR2106(4)) VIN = 0V (IR2107(4)) IIN- Logic “0” input bias current — 1 2 8.0 8.9 9.8 7.4 8.2 9.0 VCCUV+ VCC and VBS supply undervoltage positive going VBSUV+ threshold VCCUV- VCC and VBS supply undervoltage negative going VBSUV- threshold VCCUVH Hysteresis 0.3 0.7 — IO+ Output high short circuit pulsed current 120 200 — IO- Output low short circuit pulsed current 250 350 — VIN = 0V (IR2106(4)) VIN = 5V (IR2107(4)) V VBSUVH www.irf.com VO = 0V, PW ≤ 10 µs mA VO = 15V, PW ≤ 10 µs 3 IR2106/IR21064/IR2107/IR21074 Functional Block Diagram VB 2106 UV DETECT HO R VSS/COM LEVEL SHIFT HIN HV LEVEL SHIFTER R PULSE FILTER Q S VS PULSE GENERATOR VCC UV DETECT VSS/COM LEVEL SHIFT LIN LO DELAY COM VB 21064 UV DETECT HO R HIN VSS/COM LEVEL SHIFT HV LEVEL SHIFTER R PULSE FILTER Q S VS PULSE GENERATOR VCC UV DETECT LIN VSS/COM LEVEL SHIFT DELAY LO COM VSS 4 www.irf.com IR2106/IR21064/IR2107/IR21074 VB 2107 UV DETECT HO R +5V VSS/COM LEVEL SHIFT HIN HV LEVEL SHIFTER Q R PULSE FILTER S VS PULSE GENERATOR VCC UV DETECT +5V VSS/COM LEVEL SHIFT LIN LO DELAY COM VB 21074 UV DETECT VSS/COM LEVEL SHIFT HIN HO R +5V HV LEVEL SHIFTER R PULSE FILTER Q S VS PULSE GENERATOR VCC UV DETECT +5V LIN VSS/COM LEVEL SHIFT DELAY LO COM VSS www.irf.com 5 IR2106/IR21064/IR2107/IR21074 Lead Definitions Symbol Description HIN Logic input for high side gate driver output (HO), in phase (IR2106/IR21064) HIN Logic input for high side gate driver output (HO), out of phase (IR2107/IR21074) LIN Logic input for low side gate driver output (LO), in phase (IR2106/IR21064) LIN Logic input for low side gate driver output (LO), out of phase (IR2107/IR21074) VSS Logic Ground (IR21064 and IR21074 only) VB High side floating supply HO High side gate drive output VS High side floating supply return VCC Low side and logic fixed supply LO Low side gate drive output COM Low side return Lead Assignments 1 VB VCC 1 VCC VB 8 7 2 HIN HO 7 2 HIN HO 3 LIN VS 6 3 LIN VS 6 COM LO 5 4 COM LO 5 4 1 8 Lead PDIP 8 Lead SOIC IR2106 IR2106S 14 VCC 1 14 VCC HIN VB 13 LIN HO 12 VS 11 2 HIN VB 3 LIN HO 12 3 VS 11 4 VSS 10 5 VSS 10 6 COM 9 6 COM 9 7 LO 8 7 LO 8 4 5 6 8 13 2 14 Lead PDIP 14 Lead SOIC IR21064 IR21064S www.irf.com IR2106/IR21064/IR2107/IR21074 VB 8 1 VCC VB 8 HIN HO 7 2 HIN HO 7 LIN VS 6 3 LIN VS 6 COM LO 5 COM LO 5 VCC 1 2 3 4 1 8 Lead PDIP 8 Lead SOIC IR2107 IR2107S VCC 14 1 VCC 14 2 HIN VB 13 2 HIN VB 13 3 LIN HO 12 3 LIN HO 12 VS 11 VS 4 www.irf.com 4 11 4 5 VSS 10 5 VSS 10 6 COM 9 6 COM 9 7 LO 8 7 LO 8 14 Lead PDIP 14 Lead SOIC IR21074 IR21074S 7 IR2106/IR21064/IR2107/IR21074 8 8 Lead PDIP 01-3003 01 8 Lead SOIC 01-0021 08 www.irf.com IR2106/IR21064/IR2107/IR21074 14 Lead PDIP 01-3002 03 14 Lead SOIC (narrow body) www.irf.com 01-3063 00 9 IR2106/IR21064/IR2107/IR21074 HIN LIN HIN LIN 50% 50% 50% 50% HIN LIN HIN LIN ton HO LO 90% Figure 1. Input/Output Timing Diagram HIN LIN HIN LIN toff tr HO LO 10% tf 90% 10% Figure 2. Switching Time Waveform Definitions 50% 50% 50% 50% LO HO 10% MT MT 90% LO HO Figure 3. Delay Matching Waveform Definitions IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 IR EUROPEAN REGIONAL CENTRE: 439/445 Godstone Rd., Whyteleafe, Surrey CR3 0BL, United Kingdom Tel: ++ 44 (0) 20 8645 8000 IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171-0021 Tel: 8133 983 0086 IR HONG KONG: Unit 308, #F, New East Ocean Centre, No. 9 Science Museum Road, Tsimshatsui East, Kowloon Hong Kong Tel: (852) 2803-7380 Data and specifications subject to change without notice. 3/18/2000 10 www.irf.com