3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP Standard Characteristics Example Standard characteristics described below are just examples of the 3858 Group's characteristics and are not guaranteed. For rated values, refer to "3858 Group Datasheet". (1) Power Supply Current Standard Characteristics Example (Vcc-Icc) When system is operating in high-speed mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version (A/D conversion not executed) When system is operating in middle-speed mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version (A/D conversion not executed) 10 5.0 4.5 f(XIN)=8MHz f(XIN)=8MHz 8 Power Supply Current Icc [mA] Power Supply Current Icc [mA] f(XIN)=12MHz f(XIN)=12MHz 9 7 6 5 4 3 2 1 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig.1 Vcc-Icc (QzROM version, high-speed mode) 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig.2 Vcc-Icc (QzROM version, middle-speed mode) When system is operating in low-speed mode (crystal oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version (A/D conversion not executed) At 8 MHz high-speed mode, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version 80 7 A/D conversion executed f(XIN)=32KHz Power Supply Current Icc [mA] Power Supply Current Icc [uA] 70 60 50 40 30 20 A/D conversion not executed 6 5 4 3 2 1 10 0 0 1.5 2 2.5 3 3.5 4 4.5 5 Power Source Voltage Vcc [V] Fig.3 Vcc-Icc (QzROM version, low-speed mode) 5.5 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig.4 Vcc-Icc (QzROM version, increment at A/D conversion executed) At WIT instruction executed (ceramic oscillation, Ta = 25 ° C,f(XIN)=8MHz, output transistor is in the cut-off state) QzROM version At WIT instruction executed (crystal oscillation, Ta = 25 ° C,f(XCIN)=32KHz, output transistor is in the cut-off state) QzROM version 50.0 2.0 low-speed mode WIT high-speed mode WIT Power Supply Current Icc [mA] Power Supply Current Icc [mA] low-speed mode WIT middle-speed mode WIT 1.5 1.0 0.5 40.0 30.0 20.0 10.0 0.0 0.0 1.5 2.5 3.5 4.5 Power Source Voltage Vcc [V] Fig.5 Vcc-Icc (QzROM version, at WIT instruction executed in middle-speed mode ) REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. 1.5 5.5 2.5 3.5 4.5 5.5 Power Source Voltage Vcc [V] Fig.6 Vcc-Icc (QzROM version, at WIT instruction executed in low-speed mode ) Page 1 of 6 July 2008 3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP (2) Power Supply Current Standard Characteristics Example (f(XIN) -Icc) When system is operating in high-speed mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version (A/D conversion not executed) When system is operating in middle-speed mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version (A/D conversion not executed) 3.0 7.0 Vcc = 5.0 V Vcc = 2.7 V 2.5 Vcc = 5.0 V Vcc = 4.0 V Power Supply Current Icc [mA] Power Supply Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 2.0 1.5 1.0 0.5 0.0 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig.7 f(XIN) -Icc (QzROM version, high-speed mode) 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig..8 f(XIN) -Icc (QzROM version, middle-speed mode) At WIT instruction executed in middle-speed mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) QzROM version Power Supply Current Icc [mA] 2.0 Vcc = 5.0 V Vcc = 2.7 V 1.5 1.0 0.5 0.0 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig..9 f(XIN) -Icc (QzROM version at WIT instruction executed in middle-speed mode) REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. Page 2 of 6 July 2008 3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP (3) Port Standard characteristics Example (VOH-IOH) VOH-IOH (Vcc = 5.0 V, Ports P0, P1,P20, P21,P24-P27, P3, P4) QzROM version VOH-IOH (Vcc = 2.7 V, Ports P0, P1, P20,P21,P24-P27, P3, P4) QzROM version -50 -20 Ta= -20°C "H" Output Current IOH [mA] "H" Output Current IOH [mA] -40 Ta=25°C -30 -20 -10 0 -15 Ta=-20°C -10 Ta = 25°C -5 0 0 1 2 3 4 5 "H" Output Voltage VOH [V] Fig.10 QzROM version, VOH-IOH (Vcc = 5.0 V, Ports P0,P1,P20,P21,P24-P27, P3, P4) 0 1 2 3 4 5 "H" Output Voltage VOH [V] Fig..11 QzROM version, VOH-IOH (Vcc = 2.7 V, Ports P0,P1,P20,P21,P24-P27, P3, P4) (4) Port Standard Characteristics Example (VOL-IOL) VOL-IOL (Vcc = 5.0 V, Ports P0, P20,P21,P24-P27, P3, P4) QzROM version VOL-IOL (Vcc = 2.7 V, Ports P0, P20,P21,P24-P27, P3, P4) QzROM version 60 30 Ta=-20°C 25 "L" Output Current IOL [mA] "L" Output Current IOL [mA] 50 40 Ta=25°C 30 20 20 Ta=-20°C 15 Ta=25°C 10 5 10 0 0 0 1 2 3 4 0 5 1 2 3 4 "L" Output Voltage VOL [V] Fig. 12 QzROM version, VOL-IOL (Vcc = 5.0 V, Ports P0, P20,P21,P24-P27, P3, P4) "L" Output Voltage VOL [V] Fig. 13 QzROM version, VOL-IOL (Vcc = 2.7 V, Ports P0, P20,P21,P24-P27, P3, P4) VOL-IOL (Vcc = 5.0 V, Ports P1) QzROM version VOL-IOL (Vcc = 2.7 V, Ports P1) QzROM version 80 5 50 70 Ta=-20°C 40 50 "L" Output Current IOL [mA] "L" Output Current IOL [mA] 60 Ta=25°C 40 30 20 30 Ta=-20°C 20 Ta=25°C 10 10 0 0 0 1 2 3 4 "L" Output Voltage VOL [V] Fig. 14 QzROM version, VOL-IOL (Vcc = 5.0 V, Port P1) REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. 5 0 1 2 3 4 5 "L" Output Voltage VOL [V] Fig. 15 QzROM version, VOL-IOL (Vcc = 2.7 V, Ports P1) Page 3 of 6 July 2008 3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP (5) Port Standard Characteristics Example (Vcc-IIL) (6) Port Standard Characteristics Example (Vcc-VIHL) Vcc-IIL (When connecting pull-up transistor, Ports P0,P1, P20, P21, P24-P27, P3, P4) QzROM version Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P0) QzROM version -120 4 -100 VIH VIL Input Voltage VIHL [V] "L" Input Current IIL [uA] 3 -80 Ta=-20°C -60 Ta=25°C Ta=85°C -40 2 1 -20 0 0 1.5 2.5 3.5 4.5 5.5 6.5 1 2 3 4 5 6 Power Source Voltage Vcc [V] Fig. 16 QzROM version, Vcc-IIL (when connecting pull-up transistor, Ports P0,P1, P20, P21, P24-P27, P3, P4) Power Source Voltage Vcc [V] Fig. 17 QzROM version , Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P0) Vcc-VIHL (RESET pin, Ta = 25 °C) QzROM version Vcc-VIHL (XIN pin, Ta = 25 °C) QzROM version 4 4 VIH VIL VIH VIL 3 Input Voltage VIHL [V] Input Voltage VIHL [V] 3 2 1 0 2 1 0 1 2 3 4 5 6 1 2 3 4 Power Source Voltage Vcc [V] Fig. 18 QzROM version, Vcc-VIHL (RESET pin) Power Source Voltage Vcc [V] Fig..19 QzROM version, Vcc-VIHL (XIN pin) Vcc-VIHL (INT0~INT2, Ta = 25 °C) QzROM version Vcc-HYS (INT0~INT2 pin , Ta = 25 °C) QzROM version 4 6 5 6 0.8 VIH VIL 0.6 Hysteresis HYS [V] 3 Input Voltage VIHL [V] 5 2 1 0.4 0.2 0 0.0 1 2 3 4 Power Source Voltage Vcc [V] Fig. 20 QzROM version, Vcc-VIHL (INT0/P41 pin) REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. 5 6 1 2 3 4 Power Source Voltage Vcc [V] Fig.21 QzROM version, Vcc-HYS (INT0/P41) Page 4 of 6 July 2008 3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP Vcc-HYS (RESET pin, Ta = 25 °C) QzROM version 1.0 Hysteresis HYS [V] 0.8 0.6 0.4 0.2 0.0 1 2 3 4 5 6 Power Source Voltage Vcc [V] Fig. 22 QzROM version, Vcc-HYS (RESET pin) (7) Port Standard Characteristics Example (VIN-II (AD) ) VIN-II (AD) (A/D converter operation, f(Xin) = 12.5 MHz,high-speed mode Vcc = 5.0 V, Ta = 25 °C) QzROM version 1.0 A/D conversion clock: f(XIN) 0.5 Input Current II (AD) [uA] Input Current II (AD) [uA] 1.0 VIN-II (AD) (A/D converter operationg, f(Xin) =8 MHz, high-speed mode Vcc = 5.0 V, Ta = 25 °C) QzROM version 0.0 -0.5 0.5 0.0 -0.5 -1.0 -1.0 0 1 2 3 4 0 5 Input Voltage VIN [V] Fig. 23 QzROM version, VIN-II (AD) (f(Xin) =12.5 MHz high-speed mode ) 1 2 3 4 5 Input Voltage VIN [V] Fig.24 QzROM version, VIN-II (AD) (f(Xin) =8 MHz high-speed mode ) VIN-II (AD) (A/D converter operation, f(Xin) = 4 MHz, high-speed mode, Vcc = 5.0 V, Ta = 25 °C) QzROM version Input Current II (AD) [uA] 1.0 0.5 0.0 -0.5 -1.0 0 1 2 3 4 5 Input Voltage VIN [V] Fig.25 QzROM version, VIN-II (AD) (f(Xin) = 4 MHz high-speed mode ) REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. Page 5 of 6 July 2008 3858 Group Standard Characteristics M38588GC-XXXSP/FP M38588GCSP/FP (8) A/D Conversion Accuracy Characteristics A/D conversion accuracy standard characteristics example-1 M38588 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 12.5[MHz] • Temp. = 25[°C] • CPU mode = high-speed mode • A/D conversion clock = f(XIN)/2 Error 1LSB Width Fig. 26 A/D conversion accuracy standard characteristics REJ99B1152-0100 ©2008. Renesas Technology Corp., All rights reserved. Page 6 of 6 July 2008 To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.