APTGL60TL120T3G VCES = 1200V IC = 60A @ Tc = 80°C Three level inverter Trench + Field Stop IGBT4 Application Solar converter Uninterruptible Power Supplies Features Trench + Field Stop IGBT 4 Technology - Low voltage drop - Low leakage current - Low switching losses 28 27 26 25 Benefits Stable temperature behavior Very rugged Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Easy paralleling due to positive TC of VCEsat Low profile RoHS Compliant 20 19 18 23 22 29 16 30 15 31 14 32 Kelvin emitter for easy drive Very low stray inductance High level of integration Internal thermistor for temperature monitoring 13 2 3 4 7 8 10 11 12 All multiple inputs and outputs must be shorted together Example: 10/11/12 ; 7/8 … Q1 to Q4 Absolute maximum ratings IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation RBSOA TC = 25°C Max ratings 1200 80 60 100 ±20 280 Tj = 150°C 100A @ 1100V TC = 25°C TC = 80°C TC = 25°C Reverse Bias Safe Operating Area Unit V October, 2012 Parameter Collector - Emitter Breakdown Voltage A V W These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-7 APTGL60TL120T3G – Rev 1 Symbol VCES APTGL60TL120T3G All ratings @ Tj = 25°C unless otherwise specified Q1 to Q4 Electrical Characteristics Symbol Characteristic ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25°C VGE = 15V IC = 50A Tj = 150°C VGE = VCE , IC = 1.6mA VGE = 20V, VCE = 0V Min Typ 5.0 1.8 2.2 5.8 Max Unit 1 2.2 mA 6.5 400 V nA Max Unit V Q1 to Q4 Dynamic Characteristics Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance QG Gate charge Tf Td(on) Tr Td(off) Tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Isc Short Circuit data RthJC VGE = 0V VCE = 25V f = 1MHz VGE= ±15V ; VCE=600V IC=50A Inductive Switching (25°C) VGE = ±15V VCE = 600V IC = 50A RG = 8.2 Inductive Switching (150°C) VGE = ±15V VCE = 600V IC = 50A RG = 8.2 TJ = 25°C VGE = ±15V VCE = 600V TJ = 150°C IC = 50A TJ = 25°C RG = 8.2 TJ = 150°C VGE ≤15V ; VBus = 900V tp ≤10µs ; Tj = 150°C Junction to Case Thermal Resistance Min Typ 2770 205 160 pF 0.38 µC 50 27 270 ns 70 50 30 ns 290 80 3.8 5.5 2.5 4.5 mJ 200 A mJ 0.53 °C/W October, 2012 Td(on) Tr Td(off) Test Conditions www.microsemi.com 2-7 APTGL60TL120T3G – Rev 1 Symbol Characteristic APTGL60TL120T3G CR1 to CR6 diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF Maximum Reverse Leakage Current Test Conditions VR=600V DC Forward Current IF = 30A IF = 60A IF = 30A Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge di/dt =200A/µs Err Reverse Recovery Energy IF = 30A VR = 800V IF = 30A VR = 800V Min 1200 Tj = 25°C Tj = 150°C Tc = 80°C Typ Max 100 500 Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C 30 2.6 3.2 1.8 300 380 360 Tj = 125°C 1700 Tj = 125°C 1.6 Unit V µA A 3.1 V ns nC mJ di/dt =1000A/µs RthJC Junction to Case Thermal Resistance 1.2 °C/W Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol R25 ∆R25/R25 B25/85 ∆B/B Characteristic Resistance @ 25°C Min Typ 50 5 3952 4 Max Unit k % K % Min 4000 -40 -40 -40 2 Typ Max Unit V T25 = 298.15 K TC=100°C RT R25 T: Thermistor temperature 1 1 RT: Thermistor value at T exp B25 / 85 T25 T Thermal and package characteristics Characteristic RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz To heatsink M4 175 125 100 3 110 °C N.m g October, 2012 Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight www.microsemi.com 3-7 APTGL60TL120T3G – Rev 1 Symbol VISOL TJ TSTG TC Torque Wt APTGL60TL120T3G SP3 Package outline (dimensions in mm) See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com Q1 to Q4 Typical performance curve VCE=600V D=50% R G=8.2 Ω T J=150°C Tc=75°C 50 40 30 October, 2012 20 Hard switching 10 0 10 20 30 40 50 60 70 80 90 IC (A) www.microsemi.com 4-7 APTGL60TL120T3G – Rev 1 Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 60 APTGL60TL120T3G Output Characteristics (VGE=15V) 100 Output Characteristics 100 TJ = 150°C 80 TJ=25°C 60 VGE=19V 60 TJ=150°C IC (A) IC (A) 80 40 VGE=15V 40 20 VGE=9V 20 0 0 0 1 2 VCE (V) 3 4 0 Transfert Characteristics 100 VCE = 600V VGE = 15V RG = 8.2 Ω TJ = 150°C 60 12 E (mJ) IC (A) TJ=25°C 16 40 3 4 Eon 8 Eoff TJ=150°C 4 0 0 5 6 7 8 9 10 11 12 0 13 20 40 60 80 100 IC (A) VGE (V) Switching Energy Losses vs Gate Resistance Reverse Bias Safe Operating Area 12 120 100 10 8 6 VCE = 600V VGE =15V IC = 50A TJ = 150°C 80 IC (A) Eon E (mJ) 2 VCE (V) Energy losses vs Collector Current 20 80 20 1 Eoff 60 40 4 VGE=15V TJ=150°C RG=8.2 Ω 20 2 0 0 10 20 30 Gate Resistance (ohms) 0 40 300 600 900 VCE (V) 1200 1500 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.9 0.4 0.7 0.3 0.5 0.2 0.3 0.1 0.1 Single Pulse 0.05 0 0.00001 October, 2012 0.5 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) www.microsemi.com 5-7 APTGL60TL120T3G – Rev 1 Thermal Impedance (°C/W) 0.6 APTGL60TL120T3G CR1 to CR6 Typical performance curve Forward Current vs Forward Voltage IF, Forward Current (A) 80 TJ=125°C 60 40 20 TJ=25°C 0 0.0 1.0 2.0 3.0 4.0 VF, Anode to Cathode Voltage (V) Switching Energy Losses vs Gate Resistance 1.8 2 1.6 1.4 1.5 E (mJ) E (mJ) Energy losses vs Collector Current 2.5 VCE = 800V VGE = 15V RG = 5Ω TJ = 125°C 1 0.5 20 40 60 VCE = 800V VGE =15V IC = 30A TJ = 125°C 1 0.8 0 0 1.2 0.6 80 0 10 IC (A) 20 30 Gate resistance (ohms) Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 1.2 1 0.8 0.9 0.7 0.5 0.6 0.2 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 October, 2012 0.4 Rectangular Pulse Duration (Seconds) www.microsemi.com 6-7 APTGL60TL120T3G – Rev 1 Thermal Impedance (°C/W) 1.4 APTGL60TL120T3G DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. www.microsemi.com 7-7 APTGL60TL120T3G – Rev 1 October, 2012 Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.