FRDM STBCA8491 FRDM STBCA8491 FRDMSTBC-A8491 For more information, visit freescale.com/ sensortoolbox Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. FRDMSTBCA8491QRC REV 1 920-28977 REV A Get Started Download tools and documentation under Jump-Start Your Design at freescale.com/ sensortoolbox Quick Reference Card 3-Axis Sensor Toolbox Development Board MMA8491Q 3-axis multifunction digital accelerometer FREESCALE FREEDOM PLATFORM 3 4 5 Connect the FRDMSTBC-A8491 development board to a Freescale Freedom development board, such as the FRDM-KL25Z (or any Arduino R3 compatible board). Refer to the Freescale Freedom development board Quick Start Guide for driver information. MMA8491Q 3-axis multifunction digital accelerometer 12 QFN (3 mm x 3 mm x 1.05 mm) 6 – I2C_SCL1 5 – I2C_SDA1 XOUT – 3 2 – EN YOUT – 6 7 – GND 6 – GND ZOUT – 1 Plug one end of a USB cable into the SDA port on the assembly. Plug the other end of the cable into the USB port on the computer. Download and install the latest Sensor Toolbox software at: freescale.com/sensortoolbox 4 – VDD 2 – VDD I2C_SDA0 – 9 I2C_SCL0 – 10 Start the Sensor Toolbox software. Through hole pins (8 places) Test points (8 places) Learn more at freescale.com/sensortoolbox 2 Verify package contents: FRDMSTBC-A8491 development board Get to Know the FRDMSTBC-A8491 1