DISCRETE SEMICONDUCTORS DATA SHEET M3D744 PBSS5140V 40 V low VCEsat PNP transistor Product specification Supersedes data of 2001 Oct 19 2002 Mar 20 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V FEATURES QUICK REFERENCE DATA • 300 mW total power dissipation SYMBOL • Very small 1.6 mm × 1.2 mm × 0.55 mm ultra thin package VCEO collector-emitter voltage −40 V IC collector current (DC) −1 A ICM peak collector current −2 A RCEsat equivalent on-resistance <340 • Improved thermal behaviour due to flat leads • Self alignment during soldering due to straight leads PARAMETER MAX. UNIT mΩ • Low collector-emitter saturation voltage • High current capability PINNING PIN DESCRIPTION APPLICATIONS 1 collector • General purpose switching and muting 2 collector • LCD back lighting 3 base • Supply line switching circuits 4 emitter • Battery driven equipment (mobile phones, video cameras and hand-held devices). 5 collector 6 collector DESCRIPTION PNP low VCE sat transistor in a SOT666 plastic package. NPN complement: PBSS4140V. handbook, halfpage 6 5 4 1, 2, 5, 6 MARKING 3 TYPE NUMBER PBSS5140V MARKING CODE 4 25 1 Top view 2 3 MAM446 Fig.1 Simplified outline (SOT666) and symbol. 2002 Mar 20 2 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter − −40 V VCEO collector-emitter voltage open base − −40 V VEBO emitter-base voltage open collector − −5 V IC collector current (DC) − −1 A ICM peak collector current − −2 A IB base current (DC) − −300 mA IBM peak base current Ptot total power dissipation − −1 A Tamb ≤ 25 °C; note 1 − 300 mW Tamb ≤ 25 °C; note 2 − 500 mW Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb operating ambient temperature −65 +150 °C Notes 1. Device mounted on a printed-circuit board, single side copper, tinplated and standard footprint. 2. Device mounted on a printed-circuit board, single side copper, tinplated and mounting pad for collector 1 cm2. THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER thermal resistance from junction to ambient CONDITIONS VALUE UNIT note 1 410 K/W note 2 215 K/W Notes 1. Device mounted on a printed-circuit board, single side copper, tinplated and standard footprint. 2. Device mounted on a printed-circuit board, single side copper, tinplated and mounting pad for collector 1 cm2. Soldering The only recommended soldering is reflow soldering. 2002 Mar 20 3 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO PARAMETER collector-base cut-off current CONDITIONS VCB = −40 V; IE = 0 MIN. TYP. MAX. − − −100 nA VCB = −40 V; IE = 0; Tamb = 150 °C − − −50 µA − −100 nA nA ICEO collector-emitter cut-off current VCE = −30 V; IB = 0 IEBO emitter-base cut-off current VEB = −5 V; IC = 0 − − −100 hFE DC current gain VCE = −5 V; IC = −1 mA 300 − − VCE = −5 V; IC = −100 mA 300 − 800 VCE = −5 V; IC = −500 mA 250 − − VCE = −5 V; IC = −1 A 160 − − − −80 −140 VCEsat UNIT collector-emitter saturation voltage IC = −100 mA; IB = −1 mA − mV IC = −500 mA; IB = −50 mA − −120 −170 mV IC = −1 A; IB = −100 mA − −200 −310 mV RCEsat equivalent on-resistance IC = −500 mA; IB = −50 mA; note 1 − 240 <340 mΩ VBEsat base-emitter saturation voltage IC = −1 A; IB = −50 mA − − −1.1 V VBEon base-emitter turn-on voltage VCE = −5 V; IC = −1 A − − −1 V fT transition frequency IC = −50 mA; VCE = −10 V; f = 100 MHz 150 − − MHz Cc collector capacitance VCB = −10 V; IE = Ie = 0; f = 1 MHz − − 12 pF Note 1. Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 2002 Mar 20 4 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V PACKAGE OUTLINE Plastic surface mounted package; 6 leads SOT666 D E A X Y S S HE 6 5 4 pin 1 index A 1 2 e1 c 3 bp w M A Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A bp c D E e e1 HE Lp w y mm 0.6 0.5 0.27 0.17 0.18 0.08 1.7 1.5 1.3 1.1 1.0 0.5 1.7 1.5 0.3 0.1 0.1 0.1 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 01-01-04 01-08-27 SOT666 2002 Mar 20 EUROPEAN PROJECTION 5 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Mar 20 6 Philips Semiconductors Product specification 40 V low VCEsat PNP transistor PBSS5140V NOTES 2002 Mar 20 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA74 © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/02/pp8 Date of release: 2002 Mar 20 Document order number: 9397 750 09427