KEC Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector Fuse drawer must be ordered separately (see accessories). Standard or Medical Fuse drawer Fuse drawer must be ordered separately (see accessories). C14 70° C Description -Panel Mount: Screw-on version from front or rear side, snap-in version from front side -3 Functions: Appliance Inlet Protection class I, Fuseholder with interchangeable fuse drawer for Fuse-links 5 x 20 mm or 6.3 x 32 mm 1‑ or 2‑pole, with or without voltage selector (step switch) -Quick connect terminals 4.8 x 0.8 mm -Alternative: version with line filter KFC Approvals Characteristics -Available with or without internal connections -The fuse drawer "Fingergrip" can be removed by hand For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Fuse drawer with other voltage values -For protection class II References -VDE License Number: 40012271 -UL License Number: E93617 -CSA License Number: 38456 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 13 A / 125 VAC; 60 Hz ¹⁾ > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Voltage Selectors C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 or 6.3 x 32 mm 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves optional, step, 2-4 digits 1) UL/CSA: 1-pole version 13 A, 2-pole version 10 A Dimensions Screw on PCB mounting 58 mm Snap-in mounting 55 R 4.5 4.8x0.8 S ±0.1 0 R 3 -0.2 R 3.1 27.2 R 3 -0.2 18 27.5 2 2.2 18 27.5 41 40.7 +0.2 0 230 0 43.5 41 40.7 58 50 +0.2 0 ø 6.3x90˚ ø 3.2 4.8x0.8 30 230 R 4.5 55 M3/ø 3.6 R6 50 ±0.15 30 27.2 +0.2 0 R 3.1 27.5 Connectors 2 2.2 27.5 +0.2 0 KEC Power entry modules without line filter www.schurter.com/pg05 Diagrams without internal connections Voltage selector 4-positions, 1-pole without internal connections Voltage selector 4-positions, 2-pole with internal connections Voltage selector 4-positions, 1-pole with internal connections Voltage selector 4-positions, 2-pole Voltage selector 3-positions 1-pole Voltage selector 3-positions 2-pole Voltage selector 2-positions 1-pole Voltage selector 2-positions 2-pole without voltage selector 1-pole without voltage selector 2-pole Derating Curves Fuses 5 x 20 mm (1-pole) Fuses 5 x 20 mm (2-pole, per pole) 2.0 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.5 Ambient air temperature Ta °C I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 40 60 80 100 Fuses 6.3 x 32 mm (2-pole, per pole) 3.15 2.5 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt I = 1.0 In Ambient air temperature Ta °C Fuses 6.3 x 32 mm (1-pole) Ambient air temperature Ta °C 1.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 Ambient air temperature Ta °C Connectors KEC Power entry modules without line filter www.schurter.com/pg05 Variants Fuse drawer must be ordered separately (see accessories). Fingergrip and Extra-Safe Panel mounting Panel Thickness s [mm] Fuseholder Voltage Selectors Internally wired Screw - Screw - Screw 1-pole without l 4303.0031 1-pole 3/4 digits l 4303.0091 - 1-pole 2 pos. l 4303.0211 Screw - 1-pole without 4303.1031 Screw - 1-pole 3/4 digits 4303.1091 Screw - 1-pole 2 pos. Screw - 2-pole without l 4303.0001 Screw - 2-pole 3/4 digits l 4303.0061 Screw - 2-pole 2 pos. l 4303.0181 Screw - 2-pole without 4303.1001 Screw - 2-pole 3/4 digits 4303.1061 Screw - 2-pole 2 pos. Snap-in 1.5 1-pole without l 4303.0032 Snap-in 1.5 1-pole 3/4 digits l 4303.0092 Snap-in 1.5 1-pole 2 pos. l 4303.0212 Snap-in 2 1-pole without l 4303.0033 Snap-in 2 1-pole 3/4 digits l 4303.0093 Snap-in 2 1-pole 2 pos. l 4303.0213 Snap-in 2.5 1-pole without l 4303.0034 Snap-in 2.5 1-pole 3/4 digits l 4303.0094 Snap-in 2.5 1-pole 2 pos. l 4303.0214 Snap-in 1.5 1-pole without 4303.1032 Snap-in 1.5 1-pole 3/4 digits 4303.1092 Snap-in 1.5 1-pole 2 pos. 4303.1212 Snap-in 2 1-pole without 4303.1033 Snap-in 2 1-pole 3/4 digits 4303.1093 Snap-in 2 1-pole 2 pos. 4303.1213 Snap-in 2.5 1-pole without 4303.1034 Snap-in 2.5 1-pole 3/4 digits 4303.1094 Snap-in 2.5 1-pole 2 pos. Snap-in 1.5 2-pole without l 4303.0002 Snap-in 1.5 2-pole 3/4 digits l 4303.0062 Snap-in 1.5 2-pole 2 pos. l 4303.0182 Snap-in 2 2-pole without l 4303.0003 Snap-in 2 2-pole 3/4 digits l 4303.0063 Snap-in 2 2-pole 2 pos. l 4303.0183 Snap-in 2.5 2-pole without l 4303.0004 Snap-in 2.5 2-pole 3/4 digits l 4303.0064 Snap-in 2.5 2-pole 2 pos. l 4303.0184 Snap-in 1.5 2-pole without 4303.1002 Snap-in 1.5 2-pole 3/4 digits 4303.1062 Snap-in 1.5 2-pole 2 pos. 4303.1182 Snap-in 2 2-pole without 4303.1003 Snap-in 2 2-pole 3/4 digits 4303.1063 Snap-in 2 2-pole 2 pos. 4303.1183 Snap-in 2.5 2-pole without 4303.1004 Snap-in 2.5 2-pole 3/4 digits 4303.1064 Snap-in 2.5 2-pole 2 pos. 4303.1184 Packaging unit Order Number 4303.1211 4303.1181 4303.1214 50 Pcs Connectors KEC Power entry modules without line filter www.schurter.com/pg05 Required Accessory Description Fusedrawer 3 Fusedrawer for Fuse Links 5x20mm resp.. 6.3x32mm Fingergrip, 5 x 20, 2-pole, Voltage Selectors 4303.2014.00 Fingergrip, 5 x 20, 2-pole, Voltage Selectors, 100, 120, 220, 240 4303.2014.01 Fingergrip, 5 x 20, 2-pole, Voltage Selectors, 110, 150, 220 4303.2014.02 Fingergrip, 5 x 20, 2-pole, Voltage Selectors, 110, 220 4303.2014.03 ... Accessories Assorted Covers Rear Cover 0859.0072 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to KEC Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to KEC ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to KEC ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.