10.9"[4.274"] [276.9mm] 8.76mm [0.345"] 10.80mm [0.425"] 27.94mm [1.100"] 19.43mm [0.765"] RoHS Compliant 5.08mm [0.200"] ICE End View 21.59mm [0.850"] Top View 6.35mm [0.250"] Side View ground plane (hatched) 1.97mm [0.078"] -0.010" + 0.025" Flex + stiffener 2 layer flex trace/route layer 0.38mm Flex only [0.015"] -0.005" + 0.010" 8.51mm [0.335"] Bottom View Description: Flex extender 15 position 0.1" header to Hirose connector - DF12A(3.0)-20DS-0.5V(81) XT-PSoC-15-20H-10-01 Drawing © 2005 IRONWOOD ELECTRONICS, INC. PO BOX21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Preliminary 1 of 3 Page: __ 1:0.6 Scale: ____ Rev: F Drawing: M. Tully Date: 11/8/05 File: XT-PSoC-15-20H-01-01 Dwg Modified: 1/3/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. PROPRIETARY INFORMATION: Information contained in this drawing is confidential. Copying, distributing or use in any matter, other than that specified by IRONWOOD ELECTRONICS, INC., is strictly prohibited and may be unlawful. If you have received this drawing in error, please return to IRONWOOD ELECTRONICS, INC. at the address listed below. Detail A 1.54mm [0.061"] Encapsulation epoxy and thumb pull removed for drawing clarity PSoC ICE not to scale 226.30mm [8.909"] Detail A 794 894 To ICE CY8C24X94 27.57mm [1.085"] RoHS Compliant Description: Flex extender 15 position 0.1" header to Hirose connector - DF12A(3.0)-20DS-0.5V(81) XT-PSoC-15-20H-10-01 Drawing © 2005 IRONWOOD ELECTRONICS, INC. PO BOX21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Preliminary 2 of 3 Page: __ 75% Scale: ____ Rev: F Drawing: M. Tully Date: 11/8/05 File: XT-PSoC-15-20H-01-01 Dwg Modified: 1/3/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. 794 894 To ICE CY8C24X94 PSoC POD 3 of 3 Page: __ XT-PSoC-15-20H-10-01 Drawing © 2005 IRONWOOD ELECTRONICS, INC. PO BOX21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Preliminary 5:1 Scale: ____ Rev: F Drawing: M. Tully Date: 11/8/05 File: XT-PSoC-15-20H-01-01 Dwg Modified: 1/3/06, MT