TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01844 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 Website: http://www.microsemi.com – Exhibits Leakage Currents approaching the theoretical bulk characteristics of silicon – Oxide and Nitride passivation for long-term stable device performance – Available for upscreen to MIL-PRF-19500 requirements – Voidless hermetically sealed glass package – Metallurgically Bonded double plug construction – PICO Amp Low Leakage Diodes LEVELS DEVICES DR5100 DR5101 DR5102 DR5103 DR5139 DR5140 LR5100 LR5101 LR5102 LR5103 LR5139 LR5140 COMMERCIAL MAXIMUM RATING AT 25°C Operating Temperature: Storage Temperature: -65°C to +175°C -65°C to +175°C ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM REVERSE LEAKAGE CURRENT MAXIMUM FORWARD VOLTAGE MAXIMUM CAPACITANCE VR IR @ VR TA = 25°C IR @ VR TA = 150°C VF @ 100mA TA = 25°C C @ VR f = 1.0MHz 0V 10V VOLTS VOLTS pA nA V pF pF DR5100 75 20 10 50 1.2 6 3 DO-35 DR5101 75 20 20 100 1.2 6 3 DO-35 DR5102 75 20 10 50 1.2 6 3 DO-35 DR5103 75 20 20 100 1.2 6 3 DO-35 DR5139 75 50 50 150 1.2 6 3 DO-35 DR5140 110 100 125 200 1.2 6 3 DO-35 LR5100 75 20 10 50 1.2 6 3 DO-213AA LR5101 75 20 20 100 1.2 6 3 DO-213AA LR5102 75 20 10 50 1.2 6 3 DO-213AA LR5103 75 20 20 100 1.2 6 3 DO-213AA LR5139 75 50 50 150 1.2 6 3 DO-213AA LR5140 110 100 125 200 1.2 6 3 DO-213AA TYPE NUMBER MINIMUM BEAKDOWN VOLTAGE MAXIMUM REVERSE VOLTS VBR @ 100μA TA = 25°C LDS-0141 Rev. 3 (100570) PACKAGE DO-35 DO-213AA Page 1 of 2 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01844 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 Website: http://www.microsemi.com PACKAGE DIMENSIONS NOTES: 1. 2. Dimensions are in inches. Millimeters are given for general information only. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. Symbol BD BL LD LL BD Dimensions (DO-35) Inches Millimeters Min Max Min Max .056 .075 1.42 1.91 .140 .180 3.56 4.57 .018 .022 0.46 0.56 1.000 1.500 25.40 38.10 .050 .075 1.27 1.90 MECHANICAL CHARACTERISTICS: Case: Hermetically sealed glass case. Lead material: Silver / Dumet, Braze Alloy Category II Marking: Body painted, alpha numeric. Polarity: Cathode band. NOTES: 1. 2. 3. 4. Dimensions are in inches. Millimeters are given for general information only. Dimensions are pre-solder dip. Referencing to dimension S, minimum clearance of glass body to mounting surface on all orientations. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. LDS-0141 Rev. 3 (100570) Dimensions (DO-213) Inches Millimeters Symbol Min Max Min Max BD BL ECT S .063 .130 .016 .001 .067 .146 .022 1.60 3.30 0.41 0.03 1.70 3.71 0.56 Page 2 of 2