TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS DEVICES LEVELS AVAILABLE MHS Series COTS CLASS H CLASS K (Consult Table 3 for Part Number Designations) FEATURES ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ Operates from 3.3V to 5V logic levels Internal Switch rated for 175°C Tj 250V Operation (Note 1) Total dose capable > 300 Krads (Note 3) Available normally open or normally closed > 1000V of I/O isolation Buffered input Inputs protected against over voltage (ESD rating of 1C) SE results show no SEB through an LET of 85 (MeV / (mg / cm2)) at a fluence of 2e6 ions / cm2 Preliminary DESCRIPTION: The MHS series are Solid State Relays, where the input and output circuitry are isolated from each other. The series consists of both singles and duals, and provides both the normally open (N.O.) function as well as the normally closed (N.C.) function. Packaging one of each (a N.O. and a N.C.) in a package creates the SPDT function. Table 1 – ABSOLUTE MAXIMUM RATINGS (Tc = +25°C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Input Voltage Vin, VL +15 Vdc Output Current Io Figure 3 A Output Voltage (Note 1) VO 250 Vdc 10 Grams Weight Temperature Range, Base of Package TC -55 to +125 °C Storage Temperature Range Tstg -65 to +150 °C Lead Temperature TL 300 °C Junction Temperature Tj 125 °C Symbol Value Unit RθJC 1.25 °C/W THERMAL CHARACTERISTICS Parameters / Test Conditions Thermal Resistance, Junction-to-Case T4-LDS-0114 Rev. 8 (101471) Page 1 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Table 2 – ELECTRICAL CHARACTERISTICS, PER CHANNEL (TC = +25°C, VL = 5 Volts, Vin = 0 V or 3.3V as appropriate, unless otherwise noted) Parameters / Test Conditions Symbol Min. Minimum Input Activation Voltage Io = 5A, TC = -55 to +125°C Vin(min) 3.0 Iio Leakage (Note 4) Vio = 1kV for 5 sec. Nom Unit V Iio Output Capacitance (Note 4) Vds = 100V Max. 1 μA Coss 65 Output on Resistance Id = 5A Rds(on) 0.115 0.150 Ω Output on Resistance Id = 5A, Tj = 125°C Rds(on) 0.345 0.400 Ω Output Leakage Vin = 0, Vo = 100V Io1 1 100 μA Output Leakage Vin = 0, Vo = 80V, Tj = 125°C Io2 1 100 μA Input Buffer Supply Current VL = 5V, Tc = 25°C, 125°C Ih 50 75 mA Input Current to Activate VL = 5V, T = -55 to +125°C (Vin = 5V) Iin 500 1000 μA ton 60 125 μS toff 30 75 μS Rise Time (Figure 7) VS = 28V, RL = 30Ω (Note 4) tr 90 250 μS Fall Time (Figure 7) VS = 28V, RL = 30Ω (Note 4) tf 20 75 μS Turn On Delay (Figure 7) VS = 28V, RL = 30Ω Tc = -55°C to +125°C Turn Off Delay (Figure 7) VS = 28V, RL = 30Ω Tc = -55°C to +125°C T4-LDS-0114 Rev. 8 (101471) pF Page 2 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Table 3 – MODEL NUMBER FUNCTIONALITY CHART ELECTRICAL RATINGS RELAY CONFIGURATION MODEL NUMBER MHS2505SR $ & MHS2505SS $ & MHS2505DR $ & MHS2505DS $ & MHS2505CR $ & MHS2505CS $ & Voltage Amps SPDT 250 250 250 250 250 250 5 5 5 5 5 5 9 9 Dual SPST N.O. Dual SPST N.C. PACKAGE TYPE 8 PIN SIP with Backtab 8 PIN SIP Tabless 9 9 9 9 9 9 9 9 9 9 Replace “$” with letter to denote required screening level C = COTS H = CLASS H K = CLASS K Replace “&” with lead bend option = No lead bend -1 = SMT lead bend -2 = lead bend up -3 = lead bend down T4-LDS-0114 Rev. 8 (101471) Page 3 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Table 4 – RELIABILITY SCREENING OPTIONS C COTS Element Evaluation Non-Destruct Wirebond Pull Pre-Cap Visual Temperature Cycle Constant Acceleration PIND Pre-Burn In Electrical N/A N/A N/A N/A N/A N/A N/A Burn In N/A Final Electrical Tests Hermeticity (Fine and Gross Leak) X-Ray External Visual Certified 100% (25C) 100% N/A Sample N/A H K EQUIVALENT MIL-PRF-38534 (Note 3) Class H Class K Sample 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% (160 hours) (320 hours) 100% 100% 100% 100% N/A Yes 100% 100% Yes Yes MIL-STD-883 METHOD 2023 2017 1010 2001 2020 1015 1014 2012 2009 NOTE: (1) (2) (3) (4) (5) Internal switch is rated for > 1000 Volts breakdown. Consult factory for use at Voltages greater than 250 Volts. Current handling capability depends upon allowable Tcase and allowable Tj. See Figure 1. Microsemi does not at this time have a MIL-PRF-38534 qualified radiation hardness assurance program. Not tested. Because of the relatively slow switching times involved in power SSRs, it is important to stay within the allowances of the device performance curves. T4-LDS-0114 Rev. 8 (101471) Page 4 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Figure 1: Maximum Switch Current as a Function of Case Temperature (per Channel) (Note 2) 10 5 0 25 50 75 100 125 150 175 Tc Figure 3: Maximum Switch Current as a Function of Junction Temperature (per channel) 10 5 0 25 50 75 100 125 150 175 Tj - DegreesC T4-LDS-0114 Rev. 8 (101471) Page 5 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Figure 4: Transient Thermal Impedance (Note 5) Ma x im u m Th e rm a l Im p e d a n c e R AD -H a rd e n e d J F ET Ou tp u t S ta g e i n MH S S e ri e s S S R H y bri d P a c k a g e (Tc =25C) 10 Th e ta (C/W) 1 0.1 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 Tim e (s ) T4-LDS-0114 Rev. 8 (101471) Page 6 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Figure 5: On Resistance as a Function of Junction Temperature Figure 6: Typical Application BUFFER BUFFER T4-LDS-0114 Rev. 8 (101471) Page 7 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Figure 7: Switching Wave Forms with Circuit per Figure 6, Pin 2 T4-LDS-0114 Rev. 8 (101471) Page 8 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS PACKAGE OUTLINES, INCLUDING LEAD BEND OPTIONS AND PINOUT CONFIGURATIONS Case Outline and Dimensions – 8 PIN Package, Lead Bend Up Case Outline and Dimensions – 8 PIN Package, Lead Bend Down T4-LDS-0114 Rev. 8 (101471) Page 9 of 10 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 5 Amp SOLID STATE RELAYS Case Outline and Dimensions – 8 PIN Surface Mount Package Case Outline and Dimensions – 8 PIN Package, No Lead Bend T4-LDS-0114 Rev. 8 (101471) Page 10 of 10