D2 PA K SOT426 Tape reel SMD; standard product orientation; 12NC ending 118 Rev. 1 — 22 November 2012 Packing information 1. Packing method Printed plano box Barcode label Reel Tape Barcode label Circular sprocket holes opposite the label side of reel QA Seal Cover tape Carrier tape msc074 Fig 1. Table 1. Reel pack for SMD Packing information Package version 12NC ending Reel dimensions d x w (mm)  SPQ/PQ (pcs) Reels per box Outer box dimensions l x w x h (mm) SOT426 118 330 x 24 800 1 340 x 340 x 38  d = reel diameter; w = tape width. SOT426 NXP Semiconductors Tape reel SMD; standard product orientation; 12NC ending 118 2. Product orientation Standard product orientation SOT426 direction of feed Fig 2. Product orientation in carrier tape 3. Carrier tape dimensions 4 W K0 A0 B0 P1 mdb579 direction of feed Fig 3. Carrier tape dimensions Table 2. Carrier tape dimensions In accordance with IEC 60286-3. A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 10.6 15.8 4.9 - 16.0 24 Limited warranty and liability © NXP B.V. 2012. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 22 November 2012 Document identifier: SOT426_118 All rights reserved.