AD ADXL377

Small, Low Power, 3-Axis
±200 g Accelerometer
ADXL377
Data Sheet
FEATURES
GENERAL DESCRIPTION
3-axis sensing
Small, low profile package
3 mm × 3 mm × 1.45 mm LFCSP
Low power: 300 µA (typical)
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability
Bandwidth adjustment with a single capacitor per axis
RoHS/WEEE and lead-free compliant
The ADXL377 is a small, thin, low power, complete 3-axis
accelerometer with signal conditioned voltage outputs. The
ADXL377 measures acceleration resulting from motion, shock,
or vibration with a typical full-scale range of ±200 g.
APPLICATIONS
The ADXL377 is available in a small, low profile, 3 mm × 3 mm ×
1.45 mm, 16-lead lead frame chip scale package (LFCSP_LQ).
The user selects the bandwidth of the accelerometer using
the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.
Bandwidths can be selected to suit the application, with a range
of 0.5 Hz to 1300 Hz for the x-axis and y-axis and a range of
0.5 Hz to 1000 Hz for the z-axis.
Concussion and head trauma detection
High force event detection
FUNCTIONAL BLOCK DIAGRAM
+3V
VS
ADXL377
OUTPUT
AMPLIFIERS
AC
AMPLIFIER
CDC
32kΩ
XOUT
CX
DEMODULATOR
32kΩ
YOUT
CY
3-AXIS
SENSOR
32kΩ
ZOUT
CZ
ST
10765-001
GND
Figure 1.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADXL377
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Performance ...................................................................................8
Applications ....................................................................................... 1
Applications Information .................................................................9
General Description ......................................................................... 1
Power Supply Decoupling ............................................................9
Functional Block Diagram .............................................................. 1
Setting the Bandwidth Using CX, CY, and CZ .............................9
Revision History ............................................................................... 2
Self-Test ..........................................................................................9
Specifications..................................................................................... 3
Selecting Filter Characteristics: Noise/Bandwidth Trade-Off....9
Absolute Maximum Ratings ............................................................ 4
Axes of Acceleration Sensitivity ............................................... 10
ESD Caution .................................................................................. 4
Layout and Design Recommendations ................................... 11
Pin Configuration and Function Descriptions ............................. 5
Outline Dimensions ....................................................................... 12
Typical Performance Characteristics ............................................. 6
Ordering Guide .......................................................................... 12
Theory of Operation ........................................................................ 8
Mechanical Sensor........................................................................ 8
REVISION HISTORY
9/12—Revision 0: Initial Version
Rev. 0 | Page 2 of 12
Data Sheet
ADXL377
SPECIFICATIONS
TA = 25°C, VS = 3 V, CX = CY = CZ = 0.1 μF, acceleration = 0 g, unless otherwise noted. All minimum and maximum specifications are
guaranteed. Typical specifications are not guaranteed.
Table 1.
Parameter
SENSOR INPUT
Measurement Range
Nonlinearity
Cross-Axis Sensitivity1
SENSITIVITY, RATIOMETRIC2
Sensitivity at XOUT, YOUT, and ZOUT
Sensitivity Change Due to Temperature3
ZERO g BIAS LEVEL, RATIOMETRIC
Zero g Voltage
Zero g Offset vs. Temperature
X-Axis and Y-Axis
Z-Axis
NOISE PERFORMANCE
Noise Density
XOUT and YOUT
ZOUT
FREQUENCY RESPONSE4
Bandwidth5
XOUT and YOUT
ZOUT
RFILT Tolerance
Sensor Resonant Frequency
SELF-TEST6
Logic Input Low
Logic Input High
ST Actuation Current
Output Change
At XOUT
At YOUT
At ZOUT
OUTPUT AMPLIFIER
Output Swing Low
Output Swing High
POWER SUPPLY
Operating Voltage Range7
Supply Current
Turn-On Time8
OPERATING TEMPERATURE RANGE
Test Conditions/Comments
Each axis
Min
Typ
Max
g
%
%
±200
±0.5
±1.4
% of full scale up to 180 g
Unit
Each axis
VS = 3 V
VS = 3 V
5.8
6.5
±0.02
7.2
mV/g
%/°C
VS = 3 V, TA = 25°C
1.4
1.5
1.6
V
±12
±30
mg/°C
mg/°C
2.7
4.3
mg/√Hz
mg/√Hz
1300
1000
32 ± 15%
16.5
Hz
Hz
kΩ
kHz
0.6
2.4
60
V
V
μA
−6.5
6.5
11.5
mV
mV
mV
0.1
2.8
V
V
No external filter
Self-test, 0 to 1
No load
1.8
VS = 3 V
No external filter
−40
1
3.0
300
1
3.6
+85
V
μA
ms
°C
Defined as coupling between any two axes.
Sensitivity is essentially ratiometric to VS.
3
Defined as the output change from ambient temperature to maximum temperature or from ambient temperature to minimum temperature.
4
Actual frequency response controlled by user-supplied external filter capacitors (CX, CY, and CZ).
5
Bandwidth with external capacitors = 1/(2π × 32 kΩ × Cx).
6
Self-test response changes cubically with VS.
7
Tested at 3.0 V and guaranteed by design only (not tested) to work over the full voltage range from 1.8 V to 3.6 V.
8
Turn-on time is dependent on CX, CY, and CZ and is approximately 160 × (CX or CY or CZ) + 1, where CX, CY, and CZ are in μF and the resulting turn-on time is in ms.
2
Rev. 0 | Page 3 of 12
ADXL377
Data Sheet
ABSOLUTE MAXIMUM RATINGS
ESD CAUTION
Table 2.
Parameter
Acceleration (Any Axis)
Unpowered
Powered
VS
All Other Pins
Output Short-Circuit Duration
(Any Pin to Ground)
Operating Temperature Range
Storage Temperature Range
Rating
10,000 g
10,000 g
−0.3 V to +3.6 V
(GND − 0.3 V) to (VS + 0.3 V)
Indefinite
−55°C to +125°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. 0 | Page 4 of 12
Data Sheet
ADXL377
RES
ST
ZOUT
VS
VS
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
16
15
14
13
1
ADXL377
2
TOP VIEW
(Not to Scale)
12
NC
11
NC
10
NC
9
NC
+Z
5
6
7
8
NC
+X
GND
YOUT
4
GND
3
XOUT
RES
NOTES
1. NC = NO CONNECT.
2. THE EXPOSED PAD IS NOT INTERNALLY
CONNECTED, BUT SHOULD BE SOLDERED
FOR MECHANICAL INTEGRITY.
10765-002
+Y
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1, 3
2
4
5
6, 7
8 to 13
14, 15
16
Mnemonic
RES
ST
YOUT
XOUT
GND
NC
VS
ZOUT
EPAD
Description
Reserved. This pin must be connected to GND or left open.
Self-Test.
Y Channel Output.
X Channel Output.
Must be connected to ground.
No Connect. Not internally connected.
Supply Voltage. 3.0 V typical.
Z Channel Output.
Exposed Pad. The exposed pad is not internally connected, but should be soldered for mechanical integrity.
Rev. 0 | Page 5 of 12
ADXL377
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
N > 250 for all typical performance figures, unless otherwise noted. N is the number of parts tested and used to produce the histograms.
1.525
35
1.520
1.515
25
OUTPUT VOLTAGE (V)
20
15
10
1.510
1.505
1.500
1.495
1.490
5
OUTPUT VOLTAGE (V)
1.480
–60
10765-003
1.5200
1.5175
1.5150
1.5125
1.5100
1.5075
1.5050
1.5025
1.5000
1.4975
1.4950
1.4925
1.4900
1.4875
1.4850
1.4825
1.4800
0
1.485
–40
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 3. X-Axis Zero g Output Voltage at 25°C, VS = 3 V
10765-006
PERCENT OF POPULATION (%)
30
Figure 6. X-Axis Zero g Offset vs. Temperature, VS = 3 V
(14 Parts Soldered to PCB)
1.525
30
1.515
OUTPUT VOLTAGE (V)
PERCENT OF POPULATION (%)
1.520
25
20
15
10
1.510
1.505
1.500
1.495
1.490
5
OUTPUT VOLTAGE (V)
80
1.520
70
1.515
60
50
40
30
1.480
–60
10765-005
1.5200
1.5175
1.5150
1.5125
1.5100
1.5075
1.5050
1.5025
1.5000
1.4975
1.4950
1.4925
100
1.495
1.485
1.4900
80
1.500
10
1.4875
60
1.505
1.490
1.4850
40
1.510
20
1.4825
20
–40
–20
0
20
40
60
80
TEMPERATURE (°C)
Figure 8. Z-Axis Zero g Offset vs. Temperature, VS = 3 V
(14 Parts Soldered to PCB)
Figure 5. Z-Axis One g Output Voltage at 25°C, VS = 3 V
Rev. 0 | Page 6 of 12
100
10765-008
OUTPUT VOLTAGE (V)
1.525
1.4800
PERCENT OF POPULATION (%)
0
Figure 7. Y-Axis Zero g Offset vs. Temperature, VS = 3 V
(14 Parts Soldered to PCB)
90
OUTPUT VOLTAGE (V)
–20
TEMPERATURE (°C)
Figure 4. Y-Axis Zero g Output Voltage at 25°C, VS = 3 V
0
–40
10765-007
1.480
–60
10765-004
1.5200
1.5175
1.5150
1.5125
1.5100
1.5075
1.5050
1.5025
1.5000
1.4975
1.4950
1.4925
1.4900
1.4875
1.4850
1.4825
0
1.4800
1.485
ADXL377
25
250
20
200
15
150
OUTPUT (g)
PERCENT OF POPULATION (%)
Data Sheet
10
100
50
5
0
150
200
Figure 12. Typical Output Linearity over the Dynamic Range
10
30
SENSITIVITY (mV/g)
25
20
15
10
SENSITIVITY (mV/g)
14
12
10
8
6
4
10765-011
7.00
6.95
6.90
6.85
6.80
6.75
6.70
6.65
6.60
6.55
6.50
6.45
6.40
6.35
6.30
6.25
6.20
6.15
6.10
6.05
2
6.00
1k
Figure 13. Typical Frequency Response
16
SENSITIVITY (mV/g)
100
FREQUENCY (Hz)
Figure 10. Y-Axis Sensitivity at 25°C, VS = 3 V
0
X-AXIS, Y-AXIS RESPONSE
Z-AXIS RESPONSE
Figure 11. Z-Axis Sensitivity at 25°C, VS = 3 V
Rev. 0 | Page 7 of 12
10k
10765-013
1
10
10765-010
7.00
6.95
6.90
6.85
6.80
6.75
6.70
6.65
6.60
6.55
6.50
6.45
6.40
6.35
6.30
6.25
6.20
6.15
6.10
0
6.05
5
6.00
PERCENT OF POPULATION (%)
100
REFERENCE ACCELERATION (g)
Figure 9. X-Axis Sensitivity at 25°C, VS = 3 V
PERCENT OF POPULATION (%)
50
10765-012
7.00
SENSITIVITY (mV/g)
0
10765-009
6.95
6.90
6.85
6.80
6.75
6.70
6.65
6.60
6.55
6.50
6.45
6.40
6.35
6.30
6.25
6.20
6.15
6.10
6.05
0
6.00
X-AXIS
Y-AXIS
Z-AXIS
ADXL377
Data Sheet
THEORY OF OPERATION
The ADXL377 is a complete 3-axis acceleration measurement
system with a typical measurement range of ±200 g. The ADXL377
contains a polysilicon, surface-micromachined sensor and signal
conditioning circuitry to implement an open-loop acceleration
measurement architecture. The output signals are analog voltages
that are proportional to acceleration. The accelerometer can measure the static acceleration of gravity in tilt-sensing applications,
as well as dynamic acceleration resulting from motion, shock,
or vibration.
The sensor is a polysilicon, surface-micromachined structure
built on top of a silicon wafer. Polysilicon springs suspend the
structure over the surface of the wafer and provide resistance
against acceleration forces. Deflection of the structure is measured using a differential capacitor that consists of independent
fixed plates and plates attached to the moving mass. The fixed
plates are driven by 180° out-of-phase square waves. Acceleration
deflects the moving mass and unbalances the differential capacitor,
resulting in a sensor output whose amplitude is proportional to
acceleration. Phase-sensitive demodulation techniques are then
used to determine the magnitude and direction of the acceleration.
The demodulator output is amplified and brought off chip through
a 32 kΩ resistor. The user then sets the signal bandwidth of the
device by adding a capacitor. This filtering improves measurement
resolution and helps prevent aliasing.
MECHANICAL SENSOR
The ADXL377 uses a single structure for sensing the acceleration in the x-axis, y-axis, and z-axis. As a result, the three sense
directions are highly orthogonal with little cross-axis sensitivity.
Mechanical misalignment of the sensor die to the package or
misalignment of the package to the PCB is the chief source of
cross-axis sensitivity. Mechanical misalignment can be calibrated
at the system level.
PERFORMANCE
Rather than using additional temperature compensation circuitry,
the ADXL377 uses innovative design techniques to ensure high
performance. As a result, there is neither quantization error nor
nonmonotonic behavior, and temperature hysteresis is very low.
Rev. 0 | Page 8 of 12
Data Sheet
ADXL377
APPLICATIONS INFORMATION
POWER SUPPLY DECOUPLING
For most applications, a single 0.1 µF capacitor, CDC, placed
close to the ADXL377 supply pins adequately decouples the
accelerometer from noise on the power supply. However, in
applications where noise is present at the 50 kHz internal clock
frequency (or any harmonic thereof), additional care in power
supply bypassing is required because this noise can cause errors
in acceleration measurement.
If additional decoupling is needed, a 100 Ω (or smaller) resistor
or ferrite bead can be inserted in the supply line. In addition, a
larger bulk bypass capacitor (1 µF or greater) can be added in
parallel to CDC. Ensure that the connection from the ADXL377
ground to the power supply ground is low impedance because
noise transmitted through ground has a similar effect as noise
transmitted through VS.
SETTING THE BANDWIDTH USING CX, CY, AND CZ
The ADXL377 has provisions for band-limiting the XOUT, YOUT,
and ZOUT pins. A capacitor must be added at each of these pins to
implement low-pass filtering for antialiasing and noise reduction.
The equation for the −3 dB bandwidth is
f−3 dB = 1/(2π × 32 kΩ × Cx)
or more simply,
f−3 dB = 5 µF/Cx
The tolerance of the internal resistor (RFILT) typically varies by as
much as ±15% of its nominal value (32 kΩ), and the bandwidth
varies accordingly. A minimum capacitance of 1000 pF for CX,
CY, and CZ is recommended in all cases.
Table 4. Filter Capacitor Selection for CX, CY, and CZ
Bandwidth (Hz)
50
100
200
500
1000
Capacitor (µF)
0.10
0.05
0.025
0.01
0.005
Never expose the ST pin to voltages greater than VS + 0.3 V. If
the system design is such that this condition cannot be guaranteed (for example, if multiple supply voltages are present), it is
recommended that a clamping diode with low forward voltage
be connected between ST and VS.
SELECTING FILTER CHARACTERISTICS:
NOISE/BANDWIDTH TRADE-OFF
The selected accelerometer bandwidth ultimately determines
the measurement resolution (smallest detectable acceleration).
Filtering can be used to lower the noise floor, thereby improving
the resolution of the accelerometer. Resolution is dependent on
the analog filter bandwidth at XOUT, YOUT, and ZOUT.
The output of the ADXL377 has a typical bandwidth of 1000 Hz.
The user must filter the signal at this point to limit aliasing errors.
The analog bandwidth must be no more than half the analog-todigital sampling frequency to minimize aliasing. The analog
bandwidth can be decreased further to reduce noise and
improve resolution.
The ADXL377 noise has the characteristics of white Gaussian
noise, which contributes equally at all frequencies and is described
in terms of µg/√Hz (that is, the noise is proportional to the square
root of the accelerometer bandwidth). Limit the bandwidth to the
lowest frequency required by the application to maximize the
resolution and dynamic range of the accelerometer.
With the single-pole roll-off characteristic, the typical noise of
the ADXL377 is determined by
rms Noise = Noise Density × ( BW × 1.6 )
It is often useful to know the peak value of the noise. Peak-topeak noise can only be estimated by statistical methods. Table 5
can be used to estimate the probability of exceeding various peak
values, given the rms value.
Table 5. Estimation of Peak-to-Peak Noise
SELF-TEST
The ST pin controls the self-test feature. When this pin is set to
VS, an electrostatic force is exerted on the accelerometer beam.
The resulting movement of the beam allows the user to test
whether the accelerometer is functional. The typical change in
output is −1.08 g (corresponding to −6.5 mV) for the x-axis,
+1.08 g (or +6.5 mV) for the y-axis, and +1.83 g (or +11.5 mV)
for the z-axis. The ST pin can be left open circuit or connected
to ground (GND) in normal use.
Peak-to-Peak Value
2 × rms
4 × rms
6 × rms
8 × rms
Rev. 0 | Page 9 of 12
Percentage of Time That Noise Exceeds
Nominal Peak-to-Peak Value (%)
32
4.6
0.27
0.006
ADXL377
Data Sheet
AXES OF ACCELERATION SENSITIVITY
Figure 14 shows the axes of sensitivity for the accelerometer. Figure 15 shows the output response when the accelerometer is oriented
parallel to each of these axes.
AZ
AX
10765-014
AY
Figure 14. Axes of Acceleration Sensitivity (Corresponding Output Voltage Increases When Accelerated Along the Sensitive Axis)
XOUT = –1g
YOUT = 0g
ZOUT = 0g
TOP
GRAVITY
TOP
TOP
XOUT = 0g
YOUT = –1g
ZOUT = 0g
TOP
XOUT = 1g
YOUT = 0g
ZOUT = 0g
XOUT = 0g
YOUT = 0g
ZOUT = 1g
Figure 15. Output Response vs. Orientation to Gravity
Rev. 0 | Page 10 of 12
XOUT = 0g
YOUT = 0g
ZOUT = –1g
10765-015
XOUT = 0g
YOUT = 1g
ZOUT = 0g
Data Sheet
ADXL377
LAYOUT AND DESIGN RECOMMENDATIONS
Figure 16 shows the recommended soldering profile; Table 6 describes the profile features. Figure 17 shows the recommended PCB layout
or solder land drawing.
CRITICAL ZONE
TL TO TP
tP
TP
TL
tL
TSMAX
TSMIN
tS
RAMP-DOWN
PREHEAT
10765-016
TEMPERATURE
RAMP-UP
t25°C
TIME
Figure 16. Recommended Soldering Profile
Table 6. Recommended Soldering Profile
Profile Feature
Average Ramp Rate (TL to TP)
Preheat
Minimum Temperature (TSMIN)
Maximum Temperature (TSMAX)
Time, TSMIN to TSMAX (tS)
Ramp-Up Rate (TSMAX to TL)
Time Maintained Above Liquidous (tL)
Liquidous Temperature (TL)
Peak Temperature (TP)
Time Within 5°C of Actual Peak Temperature (tP)
Ramp-Down Rate (TP to TL)
Time 25°C to Peak Temperature (t25°C)
0.40
MAX
Sn63/Pb37
3°C/sec max
Pb-Free
3°C/sec max
100°C
150°C
60 sec to 120 sec
3°C/sec max
60 sec to 150 sec
183°C
240°C + 0°C/−5°C
10 sec to 30 sec
6°C/sec max
6 minutes max
150°C
200°C
60 sec to 180 sec
3°C/sec max
60 sec to 150 sec
217°C
260°C + 0°C/−5°C
20 sec to 40 sec
6°C/sec max
8 minutes max
3
0.25
0.50
0.30
MAX
0.50
3
1.60
0.25
1.60
DIMENSIONS SHOWN IN MILLIMETERS
Figure 17. Recommended PCB Layout
Rev. 0 | Page 11 of 12
10765-017
CENTER PAD IS NOT
INTERNALLY CONNECTED
BUT SHOULD BE SOLDERED
FOR MECHANICAL INTEGRITY
ADXL377
Data Sheet
OUTLINE DIMENSIONS
PIN 1
INDICATOR
3.10
3.00 SQ
2.90
0.30
0.25
0.18
0.50
BSC
13
PIN 1
INDICATOR
16
1
12
EXPOSED
PAD
1.70
1.60 SQ
1.50
9
1.50
1.45
1.40
4
8
0.20 MIN
BOTTOM VIEW
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.152 REF
SEATING
PLANE
5
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
04-27-2010-A
TOP VIEW
0.45
0.40
0.35
Figure 18. 16-Lead Lead Frame Chip Scale Package [LFCSP_LQ]
3 mm × 3 mm Body, Thick Quad
(CP-16-28)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADXL377BCPZ-RL
ADXL377BCPZ-RL7
EVAL-ADXL377Z
1
Measurement
Range
±200 g
±200 g
Specified
Voltage
3V
3V
Temperature Range
−40°C to +85°C
−40°C to +85°C
Z = RoHS Compliant Part.
©2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D10765-0-9/12(0)
Rev. 0 | Page 12 of 12
Package Description
16-Lead LFCSP_LQ
16-Lead LFCSP_LQ
Evaluation Board
Package Option
CP-16-28
CP-16-28
Branding
Y4P
Y4P