Photoelectric sensors OPDM 12P5104/S35A Retro-reflective sensors dimension drawing LED * 6,8 2,9 35 3,2 25 2 13 3,2 9,2 20 2,9 35 12,4 M8 x 1 * emitter and receiver axis general data photo type retro-reflective laser sensor version single lens optics light source pulsed red laser diode actual range Sb 4,5 m nominal range Sn 5 m repeat accuracy < 0,1 mm at laser focus polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED yellow power on indication LED green sensitivity adjustment no laser class 2 distance to focus 100 mm wave length 650 nm connection diagram electrical data response time / release time < 0,05 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 50 mA current consumption typ. 40 mA voltage drop Vd < 1,8 VDC output function light / dark operate output circuit PNP output current < 100 mA short circuit protection yes reverse polarity protection yes PNP BU (3) +VS dark operate light operate Z Z 0V laser warning LASER RADIATION DO NOT STARE INTO BEAM Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT mechanical data width / diameter 12,4 mm height / length 35 mm depth 35 mm type rectangular housing material die-cast zinc front (optics) glass connection types connector M8 4 pin OPDM 12P5104/S35A BN (1) WH (2) BK (4) Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 www.baumer.com 24/4/2015 Photoelectric sensors OPDM 12P5104/S35A Retro-reflective sensors ambient conditions operating temperature -10 ... +50 °C protection class IP 67 OPDM 12P5104/S35A www.baumer.com 24/4/2015