PROPRIETARY INFORMATION: Information contained in this drawing is confidential. Copying, distributing or use in any matter, other than that specified by IRONWOOD ELECTRONICS, INC., is strictly prohibited and may be unlawful. If you have received this drawing in error, please destroy or return to IRONWOOD ELECTRONICS, INC. at the address listed below. Foot alignment Mask (plugs onto MGA) 8 / 20 24X23A Rev ** 24.8mm [0.975"] C4253 (for 8 & 20 pin feet) 27.6mm [1.085"] RoHS COMPLIANT McMaster/Carr 91185A558 17.5mm [0.687"] Description: CY3250-24X23AQFN POD SSOP56 OCD (CY8C24000A-24PVX1). Hirose cable connector with retension mechanism included. Compatible with: XT-PSoC-15-20H-10-01 - Flex cable (to ICE cube) Compatible with the following Non-QFN feet: C4102 - PDIP8 C5116 - SOIC8 C3845 - SSOP20 foot C3848 - SOIC20 foot C4103 - PDIP20 foot C3846 - SSOP28 foot C3849 - SOIC28 foot C4104 - PDIP28 foot CY8C24000A-24PVXI 3.6mm [0.140"] MGA (female Mini grid array receptacle) Aligment mask, required for 8 and 20 pin feet EA-8C24000A-NQ-01 Drawing © 2006 IRONWOOD ELECTRONICS, INC. PO BOX21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com 1 Page:____of 2 Status: 3:1 Scale:___ Rev: C Drawing: M. Tully Date: 7/24/06 File: EA-8C24000A-NQ-01 Dwg Modified: 10/5/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. POD clearance, with respect to center of target pattern 1.085" X McMaster/Carr 91185A558 Y To ICE Pod 0.575" A Flex Cable 0.975" Pod B C pitch Mask (if required) Foot Pod perimeter Foot Part number Description Pitch C5116 SOIC8 foot 0.050" C4102 PDIP8 foot C3845 Mask required A B C X Y yes 0.865" 0.290" 0.265" 0.654" 0.538" 0.100" yes 0.978" 0.403" 0.377" 0.652" 0.488" SSOP20 foot 0.65mm yes 0.865" 0.290" 0.265" 0.654" 0.488" C3848 SOIC20 foot 0.050" yes 0.865" 0.290" 0.265" 0.652" 0.488" C4103 PDIP20 foot 0.100" yes 0.978" 0.403" 0.377" 0.652" 0.488" C3846 SSOP28 foot 0.65mm no 0.848" 0.273" 0.248" 0.652" 0.513" C3849 SOIC28 foot 0.050" no 0.848" 0.273" 0.248" 0.652" 0.513" C4104 PDIP28 foot 0.100" no 0.978" 0.403" 0.377" 0.652" 0.513" center of target land pattern (SSOP20 shown) 2 Page:____of 2 EA-8C24000A-NQ-01 Drawing © 2006 IRONWOOD ELECTRONICS, INC. PO BOX21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: 3:1 Scale:___ Rev: C Drawing: M. Tully Date: 7/24/06 File: EA-8C24000A-NQ-01 Dwg Modified: 10/5/06, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.