Photoelectric sensors OPDM 16P5102 Retro-reflective sensors dimension drawing 50 4 LED * 21,5 50 4,3 36 4,3 12 30 4 15,4 3 * emitter axis general data photo type retro-reflective laser sensor light source pulsed red laser diode actual range Sb 11 m nominal range Sn 12 m repeat accuracy < 1,5 mm at 0 ... 0,5 m polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED yellow sensitivity adjustment no laser class 1 distance to focus 400 mm wave length 650 nm electrical data connection diagram response time / release time < 0,1 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 70 mA current consumption typ. 60 mA voltage drop Vd < 2 VDC output function light / dark operate output circuit PNP output current < 200 mA short circuit protection yes reverse polarity protection yes PNP BN (1) WH (2) BK (4) BU (3) +VS dark operate light operate Z Z 0V laser warning mechanical data CLASS 1 LASER PRODUCT width / diameter 15,4 mm height / length 50 mm depth 50 mm type rectangular housing material die-cast zinc front (optics) glass connection types cable 4 pin, 2 m Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 ambient conditions operating temperature -10 ... +50 °C protection class IP 67 OPDM 16P5102 www.baumer.com 24/4/2015