GLENAIR 181-001-236

MIL-DTL-38999
Connectors
181-001
Size 16 Fiber Optic Socket Terminus
MIL-PRF-29504/5
181-001-126 K
Product Series
Basic Number
Dash Number
(Table I)
K = Stainless
Steel Alignment Sleeve
(Omit for Ceramic Alignment Sleeve)
.346 (8.8)
.246 (6.7)
o .082 (2.1)
o .113 (2.9)
PROTECTIVE COVER ALIGNMENT SLEEVE
(Included with Terminus)
Protective Cover
Alignment Sleeve
A Dia
.110 (2.8)
.092 (2.3)
1.132 (28.8)
1.025 (26.0)
o .130 Max
.537 (13.6)
.069 (1.8) Dia
.062 (1.6) Dia
Shrink Tube
.116 (3.0)
.114 (2.9)
Dia
.500 (12.7)
.080 (2.0) Max
Dia. Cable
Bottoming Surface
See Note 5
APPLICATION NOTES
1. Assembly packaged in plactic bag and tag identified with
manufacturer’s name and part number.
2. Material/ Finish:
Ferrule, Alignment Sleeve: Zirconia Ceramic/N.A.
or Stainless Steel/Passivate.
Terminus Assembly: Stainless Steel/Passivate
Spacer, Spring, and cover: Stainless Steel/Passivate
Shrink Tube: Kynar/N.A
3. Alignment Sleeve & Protective Cover can also be ordered
separately (Table II).
4. Metric dimensions (mm) are indicated in parentheses.
© 2006 Glenair, Inc.
5. Threaded protective cover must be retained using Thread
locker “Loctite 222” prior to insertion and fully seated
against Terminus body as shown. See Assembly Procedure on page B-8 for complete termination instruction.
6. See 182-001S for Socket Terminus Polishing Tool.
7. Recommended insertion/removal tool:
P/N: M81969/14-03 or equivalent
8. Consult factory for qualification status.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-2
www.glenair.com
MIL-DTL-38999
Connectors
181-001
Size 16 Fiber Optic Socket Terminus
MIL-PRF-29504/5
TABLE I: FIBER SIZE
Assembly
Dash Number
Fiber Size
Core/Cladding**
A Dia.
(Microns)
Reference Only
M29504/5-XXXX
181-001-125
9/125 (Singlemode)
125.5
M29504/5-4237*
181-001-126S
9/125 (Singlemode)
126
M29504/5-4238*
181-001-126
50/125 & 62.5/125
126
M29504/5-4239*
181-001-127
50/125 & 62.5/125
127
M29504/5-4046
181-001-142
100/140
142
M29504/5-4049
181-001-144
100/140
144
M29504/5-4050
181-001-145
100/140
145
181-001-156
62.5/125/155 (Polyimide)
156
M29504/5-4240*
181-001-157
62.5/125/155 (Polyimide)
157
M29504/5-4241*
181-001-173
100/140/172 (Polyimide)
173
M29504/5-4088
181-001-175
100/140/172 (Polyimide)
175
M29504/5-4242*
181-001-231
200/230
231
N/A
181-001-236
200/233
236
M29504/5-4243*
181-001-286
200/280
286
M29504/5-4244*
181-001-448
400/440
448
M29504/5-4245*
181-001-533
486/500
533
N/A
N/A
* See Note 8
** Consult factory for termini which
accomodate 600 micron and 1000
micron plastic or glass fiber.
TABLE II: TERMINUS ACCESSORIES
Assembly Dash
Number
© 2006 Glenair, Inc.
Terminus
Accessories
181-001-S
Ceramic Alignment Sleeve
181-001-K
Stainless Steel Alignment Sleeve
181-001-C
Protective cover
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]nair.com
B-3
www.glenair.com