Mighty Mouse High Density Series 811 Mighty Mouse High Density (HD) Double-Start ACME Threads General Information, Connector Selection Guide Series 811 Mighty Mouse HD with Double-Start ACME Mating Thread and .050" pitch (1.27mm) TwistPin Contact Series 811 Mighty Mouse HD connector is a high density version of the Mighty Mouse Series 801 connector. The Series 811 connector features a quick-mating, damage-resistant double-start thread with the Glenair twistpin contact system for increased circuit density. Series 811 Mighty Mouse HD Connector selector Pre-Wired Plugs Page 8 Square Flange Receptacles Page 10 Square Flange PCB Receptacles Page 15 Jam Nut Receptacles Page 12 Jam Nut PCB Receptacles Page 14 Jam Nut Tightening Tool Overmolded Cordsets Page 17 Shell Size 5 6 7 8 9 Tightening tools fit Series 811 spanner nuts supplied with jam nut receptacle connectors. Use with square drive torque wrench. Torque to 20-25 inch-pounds (2.2 – 2.8 N m). Carbon steel, nickel plated. In-Line Receptacles Page 9 Jam Nut Tool Part Number 600-146-02 600-146-03 600-146-05 600-146-05 600-146-06 Drive Square ¼" Drive ¼" Drive 3/8" Drive 3/8" Drive 3/8" Drive Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 4 E-Mail: [email protected]