Micro-D Backshells Micro-D Backshells Strain Relief Backshell, Round Cable Entry 507-146 A 507-146 Strain Relief Backshells feature saddle bar clamps for easy installation. B E-Rings attach the backshell to the Micro-D connector. C D Series 507-146 Shell Finish E J M NF Z2 Connector Size 09 15 21 25 31 37 – Chem Film – Cadmium, Yellow Chromate – Electroless Nickel – Cadmium, Olive Drab – Gold 51 51-2 67 69 100 Hardware Option Jackscrew Attachment Option Omit for Fillister Head Omit (Leave Blank) Jackscrews Jackscrews Attach With E-Ring. This Option Applies to Size 09 -69. Size 100 is Not Available With E-Ring. H – Hex Head Jackscrews E – Extended Jackscrews F – Jackpost, Female C – "C" Clip Not Available With Jacklpost. Sample Part Number 507-146 M 25 H C G E B F CODE B FILLISTER HEAD JACKSCREW ØD J P B Max. C Size In. mm. In. mm. In. mm. 09 15 21 25 31 37 51 51-2 67 69 100 .915 1.065 1.215 1.315 1.465 1.615 1.565 1.965 2.365 2.265 2.305 23.24 27.05 30.86 33.40 37.21 41.02 39.75 49.81 60.07 57.53 58.55 .450 .450 .450 .450 .450 .450 .495 .450 .450 .495 .540 11.43 11.43 11.43 11.43 11.43 11.43 12.57 11.43 11.43 12.57 13.72 .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72 © 2006 Glenair, Inc. CODE E EXTENDED JACKSCREW C CLIP ALTERNATE CONFIGURATION #2-56 THDS SIZE 09-69 # 4-40 THDS SIZE 100 E-RING A Max. .26 (6.6) .50 (12.7) #4-40 THDS K N G C H M CODE H HEX HEAD JACKSCREW .28 (7.1) A L Aluminum Alloy 6061 -T6 17-7PH Stainless Steel 300 Series Stainless Steel HOW TO ORDER 507-146 STRAIN RELIEF BACKSHELLS E F MATERIALS Shell Clips Hardware In. ± .010 .160 .190 .220 .260 .275 .285 .350 .285 .285 .350 .490 D E Max. CODE F FEMALE JACKPOST F Max. G Max. mm. ± 0.25 In. mm. In. mm. In. mm. 4.06 4.83 5.59 6.60 6.99 7.24 8.89 7.24 7.24 8.89 12.45 .780 .830 .940 .990 1.030 1.070 1.150 1.150 1.150 1.150 1.210 19.81 21.08 23.88 25.15 26.16 27.18 29.21 29.21 29.21 29.21 30.73 .550 .600 .650 .700 .740 .780 .860 .860 .860 .860 .930 13.97 15.24 16.51 17.78 18.80 19.81 21.84 21.84 21.84 21.84 23.62 .540 .590 .700 .740 .790 .830 .910 .910 .910 .910 .970 13.72 14.99 17.78 18.80 20.07 21.08 23.11 23.11 23.11 23.11 24.63 CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com L-18 E-Mail: [email protected]