Series 75 Metal-Core Conduit 750-032 Type B Series 75 Flexible Metal-Core Conduit 750-032-16 TYPE B Product Series BRASS CONDUIT INNER BRONZE BRAID OUTER TIN/COPPER EMI SHIELD NEOPRENE JACKET* Dash No. (Table I) Basic Part No. NEOPRENE JACKET * OUTER TIN/COPPER EMI SHIELD INNER BRONZE BRAID BRASS CONDUIT B DIA (Table I) A DIA (Table I) LENGTH (AS SPECIFIED IN FEET) MINIMUM BEND RADIUS Metric dimensions (mm) are in parentheses. * For other jacket materials or for conduit without the jacket, consult the factory. © 2003 Glenair, Inc. DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 A DIA .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) TABLE I B DIA MAX .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.141 (29.0) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.531 (64.3) 3.031 (77.0) 3.560 (90.4) MINIMUM BEND RADIUS** 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) 3.750 (95.3) 5.000 (127.0) 6.250 (158.8) 7.750 (196.9) 8.500 (215.9) 10.000 (254.6) 12.500 (317.5) 15.000 (381.0) ** The minimum bend radius shown for each size is based on Type A construction (see page C-5). For multiple-braided coverings, these minimum bend radii may be increased slightly. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-6