Thick film thermal printhead KD3006-DC92A KD3006-DC92A is developing type of GL40 series which are developed mainly of label printers. We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed and good printing quality. That is KD3006-DC92A which is 24V standard thick film thermal print head with high speed, high quality of printing, high durability, long life, and strong resistance to abration. zApplications High speed label printer High speed bar code printer High speed ticket printer Various high speed terminal printers zFeatures 1) Newly developed thick-film fast response thermal element is employed for this series and 4 inches/s or 100 mm/s is possible without thermal history control. It is possible to print 10 inches/s or 250 mm/s if external thermal history control is used. 2) 150km life realized by attributing durable new protection film. 3) New partial glaze construction makes it compatible with the thermal transfer application. zDimensions (Unit : mm) LABEL 10.1±0.4 (9) 182 (9.688) 162.624 (Effective Print Width) Dot #1 M ax .φ 20 (3.5) Max.40 Max.48 Dot #1920 Max.5 Max.14.0 #2 #10 #34 #33 #1 CONNECTOR B CONNECTOR A φ3H10 Length 4(Effective Depth 3) 7.3±0.3 13.3±0.3 17.8±0.2 φ3H10 (Effective Depth 3) #1 40±0.3 41.312±0.2 44±0.3 80±0.3 124±0.3 3-M3(Effective Depth 3) www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ 1/3 2009.01 - Rev.A KD3006-DC92A Data Sheet zEquivalent circuit DOT #1920 DOT #1 VH 100µFx2 35V GND #1920 #1601 #1600 #1281 #1280 #961 #960 #641 #640 #321 #320 #1 N.C. VDD STB6 STB5 STB4 STB3 STB2 STB1 LAT LATCH REGISTER CLK SHIFT REGISTER SHIFT REGISTER SHIFT REGISTER SHIFT REGISTER SHIFT REGISTER SHIFT REGISTER DI6 DO6 DI5 DO5 DI4 DO4 DI3 DO3 DI2 DO2 DI1 DO1 TM TM THERMISTOR 30kΩ B : 3950K CONNECTOR DI No. STB No. DOT No. DOT No. DI1 1 to 320 STB1 1 to 320 DI2 321 to 640 STB2 321 to 640 DI3 641 to 960 STB3 641 to 960 DI4 961 to 1280 STB4 961 to 1280 DI5 1281 to 1600 STB5 1281 to 1600 DI6 1601 to 1920 STB6 1601 to 1920 Fig.1 zPin assignments CONNECTOR A CONNECTOR B No. Circuit No. Circuit No. 1 GND 18 STB6 1 VH 2 VDD 19 CLK 2 VH 3 GND 20 / LAT 3 VH 4 VDD 21 TM 4 VH 5 NC 22 TM 5 VH 6 NC 23 STB3 6 GND 7 NC 24 STB4 7 GND 8 NC 25 STB1 8 GND 9 NC 26 STB2 9 GND 10 NC 27 DI4 10 GND 11 DI6 28 DO4 12 DO6 29 DI3 13 DI5 30 DO3 14 DO5 31 DI2 15 NC 32 DO2 16 NC 33 DI1 STB5 34 DO1 17 www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ Circuit 2/3 2009.01 - Rev.A KD3006-DC92A Data Sheet zCharacteristics Symbol Typical Unit − 162.624 mm Dot pitch − 0.0847 mm Total dot number − 1920 dots Rave 1000 Ω VH 24 V Parameter Effective printing width Average resistance value Applied voltage Applied power PO 0.50 W/dot SLT 0.83 ms Maximum number of dots energized simultaneously − 960 dots Maximum clock frequency − 12 MHz Maximum roller diameter − φ20.0 Running life / pulse life − 150/(1×10 ) km/pulses Operating temperature − 5 to 45 °C Print cycle mm 8 zData sheets 1.6 0.6 SLT : 0.82ms/line 1.4 ENERGY (mJ/dot) OPTICAL DENSITY 0.5 1.2 1.0 0.8 0.6 0.4 0.3 0.2 0.4 0.1 0.2 0.0 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.0 0 1 2 3 ENERGY (mJ/dot) SCANNING LINE TIME (ns/line) Fig.2 Representative density curve Fig.3 Maximum energy curve www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. ○ 3/3 4 2009.01 - Rev.A Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM CO.,LTD. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.0