Torque Wrenches TG38 MIL-C-5015 and MIL-C-83723 Series II Connector Wrench TG38 - 20 APPLICATION NOTES 1. Metric dimensions (mm) are indicated in parentheses. Basic Part Number Dash Number 2. Material: Aluminum alloy with electroless nickel finish. D 5.625 (142.9) Approx. D GLENAIR, INC. C B .375 (9.5) Approx A Thread E Dash Shell No. Size 8 8, 8S 10 10S, 10SL 12 12, 12S 14 14, 14S 16 16, 16S 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 44 44 48 48 © 2008 Glenair, Inc. A Thread Class 2A 1/2 -28 UNEF 5/8 -24 UNEF 3/4 -20 UNEF 7/8 -20 UNEF 1 -20 UNEF 1 1/8 -18 UNEF 1 1/4 -18 UNEF 1 3/8 -18 UNEF 1 1/2 -18 UNEF 1 3/4 -18 UNS 2 -18 UNS 2 1/4 -16 UN 2 1/2 -16 UN 2 3/4 -16 UN 3 -16 UN B Approx. .687 (17.4) .687 (17.4) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) C Approx. .718 (18.2) .718 (18.2) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) CAGE Code 06324 D Dia. ± .062 (1.6) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) E Dia. Ref. .375 (9.5) .450 (11.4) .565 (14.4) .685 (17.4) .815 (20.7) .940 (23.9) 1.060 (26.9) 1.185 (30.1) 1.317 (33.5) 1.530 (38.9) 1.780 (45.2) 1.995 (50.7) 2.245 (57.0) 2.500 (63.5) 2.750 (69.9) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 38 E-Mail: [email protected]