Micro-D Backshells Strain Relief Backshell Round Cable Entry 507-146 507-146 Strain Relief Backshells feature saddle bar clamps for easy installation. Shell E-Rings attach the backshell to the Clips Micro-D connector. materials Aluminum Alloy 6061 -T6 17-7PH Stainless Steel 300 Series Stainless Steel Hardware HOW TO ORDER 507-146 strain relief bACKshells Series Shell Finish Connector Size 507-146 E – Chem Film J – Cadmium, Yellow Chromate M – Electroless Nickel NF – Cadmium, Olive Drab Z2 – Gold 09 15 21 25 31 37 51 51-2 67 69 100 Hardware Option Jackscrew Attachment Option Omit for Fillister Head Jackscrews Omit (Leave Blank) Jackscrews Attach With E-Ring. This Option Applies to Size 09 -69. Size 100 is Not Available With E-Ring. H – Hex Head Jackscrews E – Extended Jackscrews F – Jackpost, Female C – "C" Clip Sample Part Number 507-146 M 25 H C CODE H HEX HEAD JACKSCREW .28 (7.1) A G C E B F CODE B FILLISTER HEAD JACKSCREW ØD #4-40 THDS M Size CODE E EXTENDED JACKSCREW C CLIP ALTERNATE CONFIGURATION #2-56 THDS SIZE 09-69 # 4-40 THDS SIZE 100 E-RING A Max. .26 (6.6) .50 (12.7) B Max. C In. ± .010 D mm. ± 0.25 E Max. CODE F FEMALE JACKPOST F Max. G Max. In. mm. In. mm. In. mm. In. mm. In. mm. In. 09 .915 23.24 .450 11.43 .565 14.35 .160 4.06 .780 19.81 .550 13.97 .540 13.72 15 21 25 31 1.065 1.215 1.315 1.465 27.05 30.86 33.40 37.21 .450 .450 .450 .450 11.43 11.43 11.43 11.43 .715 .865 .965 1.115 18.16 21.97 24.51 28.32 .190 .220 .260 .275 4.83 5.59 6.60 6.99 .830 .940 .990 1.030 21.08 23.88 25.15 26.16 .600 .650 .700 .740 15.24 16.51 17.78 18.80 .590 .700 .740 .790 14.99 17.78 18.80 20.07 37 51 51-2 67 1.615 1.565 1.965 2.365 41.02 39.75 49.81 60.07 .450 .495 .450 .450 11.43 12.57 11.43 11.43 1.265 1.215 1.615 2.015 32.13 30.86 41.02 51.18 .285 .350 .285 .285 7.24 8.89 7.24 7.24 1.070 1.150 1.150 1.150 27.18 29.21 29.21 29.21 .780 .860 .860 .860 19.81 21.84 21.84 21.84 .830 .910 .910 .910 21.08 23.11 23.11 23.11 69 100 2.265 2.305 57.53 58.55 .495 .540 12.57 13.72 1.515 1.800 38.48 45.72 .350 .490 8.89 12.45 1.150 1.210 29.21 30.73 .860 .930 21.84 23.62 .910 .970 23.11 24.63 © 2011 Glenair, Inc. U.S. CAGE Code 06324 mm. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] M-18