460 460-003 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Standard Profile 460 G S 003 M 17 10 F 6 CONNECTOR DESIGNATOR Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Connector Designator G Strain Relief Style (F, G) Angle and Profile H = 45 J = 90 S = Straight ROTATABLE COUPLING Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) A Thread (Table I) .690 (17.5) Max Cable M Range (Table IV) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) 1.25 (31.8) Max E (Table III) G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) Now Available with the NESTOR Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. N (Table IV) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 460 - Page 8 460 460-003 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 11 13 15 17 19 23 25 29 33 TABLE III: ELBOW DIMENSIONS F G E Max Max Max .980 (24.9) 1.380 (35.1) 1.240 (31.5) 1.000 (25.4) 1.440 (36.6) 1.260 (32.0) 1.030 (26.2) 1.500 (38.1) 1.290 (32.8) 1.050 (26.7) 1.570 (39.9) 1.310 (33.3) 1.080 (27.4) 1.630 (41.4) 1.340 (34.0) 1.120 (28.4) 1.730 (43.9) 1.380 (35.1) 1.150 (29.2) 1.800 (45.7) 1.410 (35.8) 1.320 (33.5) 2.040 (51.8) 1.580 (40.1) 1.360 (34.5) 2.130 (54.1) 1.620 (41.1) TABLE IV: CABLE ENTRY Cable N M Dash Min Max Max No. .625 (15.9) .156 (4.0) .843 (21.4) 01 .750 (19.1) .188 (4.8) .968 (24.6) 02 .875 (22.2) .250 (6.4) 03 1.046 (26.6) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability H Max 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.310 (33.3) 1.390 (35.3) 1.470 (37.3) 1.540 (39.1) 1.780 (45.2) 1.870 (47.5) Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 460 - Page 9