62 620-051 Strain Relief Rotatable Coupling - 45° and 90° 620 G A 051 M 17 CONNECTOR DESIGNATOR G ROTATABLE COUPLING A Thread (Table I) Product Series Shell Size (Table III) Connector Designator Finish (Table II) Angle and Profile A = 90 B = 45 Basic Part No. H (Table III) E (Table III) C Typ (Table I) J (Table III) F (Table III) G (Table III) Cable Entry See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 11 13 15 17 19 23 25 29 33 E Closed Max 1.071 (27.2) 1.071 (27.2) 1.280 (32.5) 1.392 (35.4) 1.517 (38.5) 1.642 (41.7) 1.767 (44.9) 1.905 (48.4) 1.968 (50.0) F Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) TABLE III: CABLE ENTRY G H Closed Max Max .903 (22.9) 1.650 (41.9) .977 (24.8) 1.650 (41.9) 1.151 (29.2) 1.765 (44.8) 1.281 (32.5) 1.874 (47.6) 1.406 (35.7) 1.918 (48.7) 1.576 (40.0) 1.962 (49.8) 1.666 (42.3) 2.006 (51.0) 2.046 (52.0) 2.301 (58.4) 2.209 (56.1) 2.389 (60.7) J Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) Cable Entry Open Closed .177 (4.5) .286 (7.3) .177 (4.5) .286 (7.3) .250 (6.4) .416 (10.6) .291 (7.4) .476 (12.1) .348 (8.8) .626 (15.9) .429 (10.9) .831 (21.1) .523 (13.3) .956 (24.3) .643 (16.3)1.081 (27.5) .704 (17.9)1.187 (30.1) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 7