2 TO -9 SOT54 Ammo pack radial taped; standard product orientation 12NC ending 126 Rev. 1 — 30 November 2012 Packing information 1. Packing method Assy tape or Plate Plate Printed plano box Tape Assy tape QA Seal Tape Tape Barcode label Printed plano box Bag QA Seal Box Barcode label Tape msc072 Fig 1. Five ammo pack radial taped SOT54 NXP Semiconductors Ammo pack radial taped; standard product orientation 12NC ending 126 Table 1. Packing information Package version 12NC ending Taping width (mm) Taping method SPQ (pcs) PQ (pcs) Outer box dimensions l x w x h (mm) SOT54 126 18 radial 2000 10000 365 x 225 x 240 2. Product orientation Standard product orientation SOT54A 12.7 6.35 32.5 max. 18 12.7 dimensions in mm Product orientation in carrier tape Fig 2. Product orientation in carrier tape Limited warranty and liability © NXP B.V. 2012. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 30 November 2012 Document identifier: SOT54_126 All rights reserved.