Composite Backshells 627-142 Composite Swing-Arm Strain Relief with Keyed Banding Insert and Self-Locking Coupling Product Series 627 - Swing-Arm Strain Relief CONNECTOR DESIGNATOR: A A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F H MIL-DTL-38999 Series I, II 627 MIL-DTL-38999 Series III and IV 142 Connector Designator A, F, H SELF-LOCKING B A ROTATABLE COUPLING Dash Number (See Table II) Basic Part Number XO 16 Finish Symbol (See Table III) K Band Option K - Band (600-083) (Omit for None) LOW PROFILE Self-Locking Coupling Typ J C G H Captivated Self-Locking Telescoping Screws - Typ E Typ Closed D .062 Min .250 Max Screw Protrusion Typ Straight Position Captive Position Screw Locks Swing Arm in 45° Incriments E M K Screw Head Same Side - Typ F Accomodates 600-083-1 Micro-Band Only Termination Area Free of Cadmium G © 2009 Glenair, Inc. 90° Position Shown 45° Position Shown Detail "B" Finish XN CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-100 Composite Backshells 627-142 Composite Swing-Arm Strain Relief with Keyed Banding Insert and Self-Locking Coupling TABLE II: DASH NUMBER Shell Size A, F H 08 09 E ± .031 G Max H Max J ± .06 .265 (6.7) 1.06 (26.9) .98 (24.9) .94 (23.9) A K Diameter A, F and H Code .140 (3.6) 10 11 .312 (7.9) 1.09 (27.7) 1.05 (26.7) .97 (24.6) .270 (6.9) 12 13 .438 (11.1) 1.18 (30.0) 1.20 (30.5) 1.03 (26.2) .390 (9.9) 14 15 .500 (12.7) 1.24 (31.5) 1.30 (33.0) 1.09 (27.7) .512 (13.0) 16 17 .625 (15.9) 1.32 (33.5) 1.44 (36.6) 1.12 (28.4) .637 (16.2) 18 19 .688 (17.5) 1.39 (35.3) 1.56 (39.6) 1.15 (29.2) .757 (19.2) 20 21 .750 (19.1) 1.55 (39.4) 1.69 (42.9) 1.18 (30.0) .881 (22.4) 22 23 .812 (20.6) 1.55 (39.4) 1.77 (45.0) 1.25 (31.8) 1.006 (25.6) 24 25 .938 (23.8) 1.61 (40.9) 1.89 (48.0) 1.28 (32.5) 1.131 (28.7) B C TABLE III: FINISH Symbol Finish Description XB No Plating - Black Color (Non-Conductive Finish) XO No Plating - Brown Color (Non-Conductive Finish) D E APPLICATION NOTES 1. 2. 3. 4. © 2009 Glenair, Inc. Metric dimensions (mm) are in parentheses and are for reference only. Glenair series 600 Backshell assembly Tools are recommended for assembly and installation. Swing Arm locks in 45° increments–Sizes 10 thru 24, additional positioning increments are manufacturer's option. Captive Screw can remain engaged to the body when positioning the Arm. When tightened, the Screw shall not protrude into the inside surfaces. 5. 6. 7. 8. Coupling nut supplied unplated. Consult factory for additional entry sizes available. See Table I in Intro for front-end dimensional details. K diameter may be smaller than required to accomodate fully populated connector. Consult engineering department for additional information. CAGE Code 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-101 G