Connector Accessories 440-069 EMI/RFI Banding and Shrink Boot Adapter Self-Locking Rotatable Coupling - Standard Profile CONNECTOR DESIGNATORS Length: S only (1/2 inch increments, e.g. 8 = 4.00 inches) Basic Number F-H Connector Designator SELF-LOCKING ROTATABLE COUPLING 440 Finish F S 069 M Contact Style Product Series H J S 20 12 - 8 Shell Size - 45° - 90° - Straight Polysulfide (Omit for None) Cable Entry B K B P T - Band - Precoiled Band (Omit for None) Shrink Boot Supplied with ‘T’ Option (Omit for None) See Table III Length ** Length ± .060 (1.52) Min. Order Length 2.5 inch A Thread (Table I) O-Ring .135 (3.4) .075 (1.9) Ref. E Typ. (Table I) K* L* M* .060 (1.5) STYLE 2 (STRAIGHT See Note 1) .380 (9.7) Anti-Rotation Device (Typ.) 1.00 (25.4) Max * (Table IV) H (Table III) F (Table III) G (Table III) J (Table III) STYLE 2 (45° & 90° See Note 1) Termination Area Free of Cadmium. Knurl or Ridges Mfr’s Option G Band Option (K Option Shown See Note 6) © 2008 Glenair, Inc. ** Length ± .060 (1.52) Min. Order Length 2.0 inch (See Note 4) Polysulfide Stripes P Option CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-20 E-Mail: [email protected] Connector Accessories 440-069 EMI/RFI Banding and Shrink Boot Adapter Self-Locking Rotatable Coupling - Standard Profile Shell Size Conn. Desig. H A-F-L 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 40 TABLE III: ELBOW DIMENSIONS F Max .806 (20.5) .832 (21.1) .856 (21.7) .882 (22.4) .908 (23.1) .927 (23.5) .953 (24.2) .979 (24.9) 1.004 (25.5) 1.197 (30.4) 1.280 (32.5) 1.294 (32.9) 1.320 (33.5) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) 1.422 (36.1) 1.545 (39.2) 1.652 (42.0) 1.960 (49.8) G Max 1.038 (26.4) 1.064 (27.0) 1.088 (27.6) 1.114 (28.3) 1.150 (29.2) 1.190 (30.2) 1.250 (31.8) 1.320 (33.5) 1.380 (35.1) 1.500 (38.1) 1.620 (41.1) 1.750 (44.5) 1.870 (47.5) TABLE IV: CABLE ENTRY Dash K L M No. 01 .125 (3.2) .250 (6.4) .312 (7.9) 31 .188 (4.8) .312 (7.9) .374 (9.5) 02 .250 (6.4) .375 (9.5) .437 (11.1) 32 .312 (7.9) .438 (11.1) .500 (12.7) 03 .375 (9.5) .500 (12.7) .562 (14.3) 33 .438 (11.1) .562 (14.3) .624 (15.8) 04 .500 (12.7) .625 (15.9) .687 (17.4) 34 .562 (14.3) .688 (17.5) .750 (19.1) 05 .625 (15.9) .750 (19.1) .812 (20.6) 35 .688 (17.5) .812 (20.6) .874 (22.2) 06 .750 (19.1) .875 (22.2) .937 (23.8) 36 .812 (20.6) .938 (23.8) 1.000 (25.4) 07 .875 (22.2) 1.000 (25.4) 1.062 (27.0) 37 .938 (23.8) 1.062 (27.0) 1.124 (28.5) 08 1.000 (25.4) 1.125 (28.6) 1.187 (30.1) 38 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 09 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 10 1.250 (31.8) 1.375 (34.9) 1.437 (36.5) 11 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 12 1.500 (38.1) 1.625 (41.3) 1.687 (42.8) 13 1.625 (41.3) 1.750 (44.5) 1.812 (46.0) 14 1.750 (44.5) 1.875 (47.6) 1.937 (49.2) 15 1.875 (47.6) 2.000 (50.8) 2.062 (52.4) 16 2.000 (50.8) 2.125 (54.0) 2.187 (55.5) * Glenair Shrink Boot Supplied with “T” Option (see Part Number Development) © 2010 Glenair, Inc. J Max 1.146 (29.1) 1.210 (30.7) 1.268 (32.2) 1.330 (33.8) 1.392 (35.4) 1.438 (36.5) 1.500 (38.1) 1.562 (39.7) 1.625 (41.3) 1.654 (42.0) 1.777 (45.1) 1.844 (46.8) 2.070 (52.6) 1.When maximum cable entry is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2.Metric dimensions (mm) are indicated in parentheses. 3.Interface O-Ring not supplied with Connector Designator A. 4.Consult factory for shorter lengths on straight backshells. 5.See G-5 for Shrink Boot Reference Information. 6.Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Shrink Boot * 770-003S111 770-003S111 770-003S112 770-003S112 770-003S112 770-001S104 770-001S104 770-001S104 770-001S104 770-001S104 770-001S105 770-001S105 770-001S105 770-001S105 770-001S106 770-001S106 770-001S107 770-001S107 770-001S107 770-001S107 770-001S108 770-001S108 770-001S109 770-001S109 CAGE CODE 06324 TABLE II: FINISHES Symbol Finish B Cadmium Plate, Olive Drab C Anodize, Black GB Black Anodize, Hard Coat M Electroless Nickel N Cad Plate, Olive Drab over Electroless Nickel NF Cadmium Plate,Olive Drab over Electroless Nickel MT Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer Z1 Stainless Steel Passivate ZL CRES, Electroless Nickel ZN Zinc-Nickel Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-21 E-Mail: [email protected] H