Connector Accessories 290-003 and 290-004 Strain Relief Backshells Length (Note 1) O-Ring (290-004 only) O-Ring (290-004 only) F A Thread Cable Sealing Grommet (290B 004 only) A Thread 1.25 (31.8) Max O-Ring (290-004 only) C Length (Note 1) B D Cable Range B E 90° F Cable Sealing Grommet (290-004 only) STYLE 1 STRAIGHT (Note 2) Cable Range 290 W A 003 Z1-16 10 H 6 E Series No. Length (S Only) (1/2 inch increments; NOTES 1. Standard minimum length for Style 1 is 1.5 e.g. 6 = 3 inches) (38.1); for Style 2 is 2.0 (50.8). Consult factory for shorter lengths. Applicable to symbol S only. Strain Relief Style 2. When cable diameter exceeds inside diameter of connector shell, Style 2 will be supplied. Dash No. (Table III) 3. Consult factory for other backshell types available for Series 22 connectors, EMI shield termiShell Size (Table II) nations, etc. 4. Metric dimensions (mm) are indicated in parenMaterial/Finish (Table I) theses. Connector Desig. Angular Function A = 90° S = Straight Basic Part Number 003 = Strain Relief 004 = Environmental Seal/Strain Relief TABLE I DESIGNATOR G Z1 DASH NO. 04 06 08 10 12 16 20 24 STYLE 2 STRAIGHT MATERIAL Aluminum Alloy QQ-A-225/8 (Backshell Body) QQ-A-591 (A380) (Strain Relief) Corrosive Resistant Steel QQ-S-763 AISI 300 Series C MAX .94 (23.9) .98 (24.9) 1.03 (26.2) 1.09 (27.7) 1.12 (28.4) 1.25 (31.8) 1.41 (35.8) 1.41 (35.8) © 2003 Glenair, Inc. SHELL SIZE 10 12 14 16 18 20 22 24 FINISH Hard Coat (Anodize) MIL-A-8625, Type III, Class 1 Passivate QQ-P-35 D MAX 1.16 (29.5) 1.22 (31.0) 1.25 (31.8) 1.32 (33.5) 1.36 (34.5) 1.45 (36.8) 1.65 (41.9) 1.65 (41.9) E MAX .957 (24.3) 1.145 (29.1) 1.332 (33.8) 1.332 (33.8) 1.551 (39.4) 1.770 (45.0) 2.113 (53.7) 2.363 (60.0) TABLE III F MAX .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .811 (20.6) .905 (23.0) 1.092 (27.7) 1.124 (28.5) CAGE Code 06324 TABLE II B A THREAD DIA CLASS 2B .781 (19.8) 5/8 - 24 UNEF .906 (23.0) 3/4 - 20 UNEF 1.031 (26.2) 7/8 - 20 UNEF 1.156 (29.4) 1 - 20 UNEF 1 1/8 - 16 UN 1.281 (32.5) 1 1/4 - 16 UN 1.406 (35.7) 1.531 (38.9) 1 3/8 - 16 UN 1.656 (42.1) 1 1/2 - 16 UN CABLE RANGE MAX MIN .312 (7.9) .125 (3.2) .437 (11.1) .250 (6.4) .562 (14.3) .312 (7.9) .350 (8.9) .625 (15.9) .750 (19.1) .500 (12.7) .937 (23.8) .625 (15.9) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) MAX ENTRY 06 06 10 12 12 16 16 24 TORQUE ± 5 IN. LBS. 80 100 120 120 140 140 140 150 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 43