38 380-014 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Low Profile CONNECTOR DESIGNATORS * 380 F S 014 M 16 10 A 6 A-B -C-D-E-F G-H-J-K-L-S Product Series Connector Designator Strain Relief Style (H, A, M, D) Angle and Profile A = 90° B = 45° S = Straight * Conn. Desig. B See Note 5 DIRECT COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION (Table III) (Table IV) Shell Size (Table I) Finish (Table II) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) E Cable Entry (Tables X, XI) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) J Length: S only (1/2 inch increments: e.g. 6 = 3 inches) F (Table IV) B (Table I) J G (Table III) (Table IV) B (Table I) H (Table IV) STYLE H Heavy Duty (Table X) T Cable Range © 2005 Glenair, Inc. STYLE A Medium Duty (Table XI) W V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 38 - Page 76 38 380-014 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 03 .630 (16.0) 1.730 (43.9) .636 (16.2) 04 .630 (16.0) 1.730 (43.9) .636 (16.2) 06 .630 (16.0) 1.730 (43.9) .710 (18.0) 08 .692 (17.6) 1.790 (45.5) .731 (18.6) 10 .755 (19.2) 1.880 (47.8) .825 (21.0) 12 .848 (21.5) 1.990 (50.5) .988 (25.1) 16 1.036 (26.3) 2.180 (55.4) 1.087 (27.6) 20 1.130 (28.7) 2.330 (59.2) 1.325 (33.7) 24 1.255 (31.9) 2.380 (60.5) 1.337 (34.0) 28 1.317 (33.5) 2.480 (63.0) 1.827 (46.4) 32 1.348 (34.2) 2.570 (65.3) 2.027 (51.5) TABLE II: STANDARD FINISHES TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. © 2005 Glenair, Inc. H Max 1.680 (42.7) 1.680 (42.7) 1.800 (45.7) 1.820 (46.2) 1.890 (48.0) 2.040 (51.8) 2.150 (54.6) 2.260 (57.4) 2.430 (61.7) 2.680 (68.1) 2.680 (68.1) GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter Cable Range lengths on Min ** Max straight .156 (4.0) .250 (6.4) backshells. .188 (4.8) .312 (7.9) 5. When using .281 (7.1) .438 (11.1) Connector .344 (8.7) .562 (14.3) Designator B .375 (9.5) .625 (15.9) refer to pages 18 .438 (11.1) .750 (19.1) and 19 for part .562 (14.3) .938 (23.8) number develop.750 (19.1) 1.250 (31.8) ment. .781 (19.8) 1.375 (34.9) .969 (24.6) 1.625 (41.3) 1.125 (28.6) 1.875 (47.6) 1.469 (37.3) 2.375 (60.3) ** Not Applicable Style D CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 38 - Page 77