MIL-C-24308 D-Subminiature 550-002 Environment Resisting EMI/RFI D-Subminiature Strain-Relief Split Backshell for Overall Shielding 550 T 002 M 2 F0 B 1 L Basic Part No. L = Strain Relief, G = Gland Nut Cable Entry Style T = Top S = Side E = End 0 = Without EMI Gasket 1 = With EMI Gasket Basic Part Number Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting Jackscrew Type (Page A-4) Finish Symbol (Page 3) Shell Size (Table I) 1.940 (49.3) Max H Cable Range Style L Strain Relief 1.940 (49.3) Max T TOP ENTRY S SIDE ENTRY 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. Overall shield. Thickness range: 0 to .062 (1.6) EMI Gasket (Optional) 1.190 (30.2) Max J E END ENTRY Style G Gland Nut TABLE I: CABLE ENTRY & ENTRY STYLE Com’l H J Shell Shell Size Max Max Size Ref 1.046 (26.6) .843 (21.4) 1 E/09 1.046 (26.6) .843 (21.4) 2 A/15 1.156 (29.4) .968 (24.6) 3 B/25 1.156 (29.4) .968 (24.6) 4 C/37 1.218 (30.9) 1.109 (28.2) 5 D/50 1.594 (40.5) 1.468 (37.3) 6* F/104 * Shell Size 6 Available in Top Entry Only. © 2004 Glenair, Inc. Entry Styles S & T Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) .812 (20.6) 1.000 (25.4) CAGE Code 06324 Entry Style E Cable Range Min Max .250 (6.4) .375 (9.5) .250 (6.4) .375 (9.5) .312 (7.9) .475 (12.1) .312 (7.9) .475 (12.1) .437 (11.1) .575 (14.6) n/a n/a Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-12 MIL-C-24308 D-Subminiature D-Subminiature Split Backshells Standard Dimensions Termination Type P Jackscrew Types B, D, E, H, K (Page A-4) Jackscrew Types B, D, E, H, K (Page A-4) R F S - SIDE ENTRY E F Jackscrew Types B, D, H, K and J Only (Page A-4) T - TOP ENTRY E Shrink Sleeve (As Required) Termination Type E - END ENTRY A D C G E B .12 (3.0) Ref. A COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) D C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) ±.005 .984 1.312 1.852 2.500 2.406 2.500 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) .730 1.050 1.594 2.240 2.140 2.240 P (18.5) (26.7) (40.5) (56.9) (54.4) (56.9) R Ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS Panel Dash No. Thickness n/a CC n/a F0 .031 (.8) R1 .047 (1.2) R2 .062 (1.6) R3 .093 (2.4) R4 .104 (2.6) R5 .125 (3.2) R6 .156 (4.0) R7 .135 (3.4) R8 .188 (4.8) R9 E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) 1. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-13