PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Panel Receptacles With Pin Contacts, Right Angle PCB Termination, 790-036P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board termination. 790-036P connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes and integral standoffs simplify installation. EMI shroud improves EMI performance. Fluorosilicone face seal provides watertight interface. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. A B How To Order 790-036P D-7P2 Part Number Shell Size Insert Arr. 790-036P Rear-Panel Mounted Receptacle with 90° PC Tail Pin Contacts for Termination to Backplanes or Flexible Circuits See Table 1 for Available Insert Arrangements Sample Part Number MT P A Shell Finish Hardware Option PC Tail Length M a Electroless Nickel .125 Inch (3.2 mm.) general purpose applications N MT No Hardware 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) G Nickel-PTFE B E PC TAIL LENGTH Zinc-Nickel with Black Chromate tactical applications (non-reflective black) D .250 inch (6.4 mm.) Guide Pin ZNU C P F S G Female Jackpost Additional shell finishes are listed on page C-9. Female Guide Socket Specifications © 2009 Glenair, Inc. #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. Shell Contacts Insulator Interfacial Seal Hardware Panel Gasket Encapsulant Aluminum alloy Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Flourosilicone rubber 300 series stainless steel Fluorosilicone, conductive Epoxy Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-1 Rev. 04-July-2009 E-Mail: [email protected] H INDEX Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration Materials and Finishes PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Table 1 Contact Arrangements A Layout A-5 B C D E F Contact Quantity #23 #16 #12 2 B-9 9 C-13 13 D-15 15 D-3P3 CONTACT PIN EMI COVER INTERFACIAL SEAL D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 3 F-15P2 13 2 F-23 23 F-5P5 .007 (0.18) Table 2 Hardware Option 5 G-33 33 H-10P4 6 H-29P7 22 4 2 2 5 H-66 66 J-17P4 13 4 J-25P2 23 2 J-33 33 J-7P7 N No Mating Hardware 7 H-36P2 34 Connector is supplied with blind, tapped holes. Shell sizes H and L have 6-32 UNC-2B thread, other sizes are #4-40. Minimum thread depth is .150" (3.81). P Jackposts Connector is supplied with nonremovable jackposts. Shell sizes H and L have #4-40 UNC-2B thread, other sizes have #2-56 thread. 7 INDEX K-27P4 23 4 K-35P2 33 2 K-43 43 K-9P9 EMI GASKET .025 (0.64) LCP TRAY H-5P5 H LCP INSULATOR 3 H-54P2 52 G .195 (4.95) EPOXY 5 B-2P2 Face View Cross-Sectional View of 790-036P G Male Guide Pins 9 L-6P6 6 © 2009 Glenair, Inc. Connector is supplied with stainless steel guide pins to mate with code S guide sockets. Pins are nonremovable. S Female Guide Sockets Connector is supplied with stainless steel guide sockets to mate with code G guide pins. Sockets are nonremovable. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-2 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors 790-036P Dimensions: Shell Sizes A-F, J, and K A B A MAX .228 (5.79) MIN B BASIC .308 (7.82) MAX C BASIC D MAX C .078 (1.98) MIN .500 (12.70) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES D JACKPOST SHOWN FOR REFERENCE. .170 (4.32) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .335 (8.51) MAX 435 (11.05) MAX .560 (14.22) MAX 2-56 UNC-2B 2 PLACES CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) C BASIC E F E MAX 790-036P Shell Sizes A-F, J and K © 2009 Glenair, Inc. A Max. In. mm. 1.211 1.361 1.511 1.611 1.761 1.911 2.261 2.661 30.76 34.57 38.38 40.92 44.73 48.54 57.43 67.59 B Basic In. mm. .925 1.075 1.225 1.325 1.475 1.625 1.975 2.375 23.50 27.31 31.12 33.66 37.47 41.28 50.17 60.33 C Basic In. mm. .565 .715 .865 .965 1.115 1.265 1.615 2.015 14.35 18.16 21.97 24.51 28.32 32.13 41.02 51.18 D Max. In. mm. .401 .551 .701 .801 .951 1.101 1.460 1.860 10.19 14.00 17.81 20.35 24.16 27.96 37.08 47.24 G E Max. In. mm. .760 .910 1.060 1.160 1.310 1.460 1.810 2.210 19.30 21.11 26.92 29.46 33.27 37.08 45.97 56.13 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 H INDEX Shell Size A B C D E F J K Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-3 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors 790-036P Dimensions: Shell Size G A B C 1.855 (47.12) MAX .228 (5.79) MIN 1.575 (40.01) BASIC 1.215 (30.86) BASIC D .078 (1.98) MIN .387 (9.83) MAX 1.079 (27.41) MAX .570 (14.48) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES E JACKPOST SHOWN FOR REFERENCE. .170 (4.32) .335 (8.51) MAX .510 (12.95) TYP F 2-56 UNC-2B 2 PLACES .018/.022 (0.46/0.56) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .630 (16.00) MAX 1.215 (30.86) BASIC 1.450 (36.83) MAX G H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-4 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors 790-036p Dimensions: shell size h and L A #2-56 FLAT HEAD SCREW B F MAX G BASIC H BASIC J .288 (6.05) MIN .088 (2.24) .415 (10.54) MAX .620 (15.75) MAX .320 (8.13) MAX 4-40 UNC-2B X .150 (3.81) MIN 2 PLACES C PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) JACKPOST SHOWN FOR REFERENCE. CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) #12 CONTACT .096/.092 (2.44/2.34) .170 (4.32) E .5075 (12.89) .700 (17.78) TYP MAX .300 (7.62) MAX 4-40 UNC-2B 2 PLACES D F H BASIC K MAX G 790-036P Shell Sizes H and L Shell Size H L F Max. In. mm. G Basic In . mm. H Basic In. mm. J Max. In. mm. K Max. In. mm. 2.500 63.50 2.736 69.49 2.236 56.79 2.472 62.79 1.800 45.72 2.036 51.71 1.450 36.83 1.686 42.82 2.045 51.94 2.281 57.94 H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-5 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Hole Patterns for 790-036P and 790-041P Receptacles A B C This section contains printed circuit board footprints for right angle Series 79 receptacles. The contact identification numbers are shown for the connector mounting side of the PC board. Contact tails are gold over nickel plated. Insert Arr. Contact Size #23 #16 #12 D .018-.022 .060-.064 .092-.096 0.46-0.56 1.52-1.63 2.34-2.44 CONNECTOR ORIENTATION 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page .565 (14.35) .2825 (7.18) A-5 PC Tail Diameter Ø Diameter In. mm. .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x 5 .003 M A M .003 M A M 4 2 3 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) 1 .075 (1.91) TYP .0375 (0.95) TYP .715 (18.16) E .270 (6.86) b-2p2 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) .003 M A M .094 ± .003 (2.39 ±0.08) 2x A1 A2 .003 M A M F .175 (4.45) .715 (18.16) .3575 (9.08) G b-9 .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x .003 M A M .003 M A M 9 5 8 7 3 4 6 1 2 .075 (1.91) TYP .0375 (0.95) TYP H .865 (21.97) .4325 (10.99) INDEX c-13 13 .094 ± .003 (2.39 ±0.08) 2x .003 M A M 7 12 6 .075 (1.91) TYP 5 4 3 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .003 M A M 8 10 9 11 .0375 (0.95) TYP © 2009 Glenair, Inc. (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) 2 1 .075 (1.91) TYP Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-10 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Insert Arr. 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page .965 (24.51) .4825 (12.26) D-15 .094 ± .003 (2.39 ±0.08) 2x 15 .003 M A M 8 14 13 7 12 10 3 4 5 6 .075 (1.91) TYP 11 A (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 15x) .003 M A M B 9 2 1 .075 (1.91) TYP .0375 (0.95) TYP C .965 (24.51) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) .4825 (12.26) .175 (4.45) 2x D-3P3 .094 ± .003 (2.39 ±0.08) 2x .003 M A M A3 .003 M A M D A1 A2 .965 (24.51) .205 (5.21) 2X .4825 (12.26) D-7P2 .094 ± .003 (2.39 ±0.08) 2x .075 (1.91) TYP 5 A2 A1 .003 M A M 2 3 1 .0375 (0.95) TYP .003 M A M 1.115 (28.32) 7 8 9 G 5 6 A2 A1 .003 M A M 3 4 2 1 .0375 (0.95) TYP 1.115 (28.32) .5575 (14.16) 10 9 8 .075 (1.91) TYP 16 15 18 17 7 6 4 .003 M A M 12 11 14 13 5 H (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 19x) INDEX .094 ± .003 (2.39 ±0.08) 2x 19 .0375 (0.95) TYP © 2009 Glenair, Inc. .075 (1.91) TYP .2795 (7.10) 2X .003 M A M .003 M A M F .003 M A M .075 (1.91) TYP (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) E-19 .075 (1.91) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) .5575 (14.16) .094 ± .003 (2.39 ±0.08) 2x E .003 M A M 4 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) E-11P2 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) 3 2 1 .075 (1.91) TYP Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-11 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors A Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Insert Arr. 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) 1.115 (28.32) .5575 (14.16) B E-7P3 .094 ± .003 (2.39 ±0.08) 2x 3 4 A2 A3 .003 M A M A1 2 1 .2975 (7.56) 2x .0375 (0.95) 2x .075 (1.91) TYP 1.265 (32.13) C (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .6325 (16.07) f-15p2 D .094 ± .003 (2.39 ±0.08) 2x 13 11 10 12 .075 (1.91) TYP A2 A1 .003 M A M 6 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 4 5 3 2 1 .075 (1.91) TYP .0375 (0.95) TYP .352 (8.94) 2X .003 M A M .003 M A M 7 8 9 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) 1.265 (32.13) E .6325 (16.07) f-23 23 22 21 .094 ± .003 (2.39 ±0.08) 2x .003 M A M 12 11 10 F .003 M A M (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 4x) .175 (4.45) 2x 20 19 16 15 18 17 7 8 9 14 13 3 4 5 6 .003 M A M .075 (1.91) TYP 2 1 .075 (1.91) TYP .0375 (0.95) TYP 1.265 (32.13) .6325 (16.07) G f-5p5 .094 ± .003 (2.39 ±0.08) 2x A4 A5 .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 1.215 (30.86) .6075 (15.43) 33 32 INDEX g-33 .094 ± .003 (2.39 ±0.08) 2x .003 M A M 31 23 22 21 12 A1 .175 (4.45) 4x .003 M A M H A2 A3 11 10 .075 (1.91) TYP 30 20 9 29 28 19 8 27 26 16 15 18 17 7 6 5 4 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) 25 24 14 13 3 2 1 .0375 (0.95) TYP © 2009 Glenair, Inc. .003 M A M Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 .075 (1.91) TYP Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-12 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Insert Arr. 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page 1.800 (45.72) .900 (22.86) h-10p4 .0375 (0.95) TYP .125 ± .003 (3.18 ±0.08) 2x A4 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 6x) 6 .003 M A M 4 5 A3 A1 A2 3 .003 M A M A .075 (1.91) TYP 2 1 .075 (1.91) TYP .472 (11.99) .236 (5.99) TYP (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 4x) .003 M A M TYP 1.800 (45.72) .290 (7.37) h-29p7 .6125 .900 (22.86) .175 (4.45) TYP A5 A7 A6 .125 ± .003 (3.18 ±0.08) 2x 19 22 .003 M A M 21 16 18 20 17 15 14 A4 A3 A2 A1 .175 (4.45) TYP 13 10 7 4 1 12 9 11 8 6 5 2 .100 (2.54) TYP 1.800 (45.72) .900 (22.86) .125 ± .003 (3.18 ±0.08) 2x 33 32 16 15 17 .003 M A M 31 7 8 30 14 13 6 18 12 11 10 4 5 19 20 3 .0375 (0.95) .003 M A M 27 26 29 28 23 22 21 25 24 A2 .1725 (4.38) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 34x) .075 (1.91) TYP 34 2 .075 (1.91) TYP A1 9 (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 2x) .003 M A M .944 (23.98) 1.800 (45.72) 52 .580 (14.73) h-54p2 .125 ± .003 (3.18 ±0.08) 2x 51 50 39 A2 27 .003 M A M 26 14 13 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 52x) 38 49 37 25 48 47 46 34 36 35 24 23 12 11 10 22 9 45 33 32 21 8 20 19 7 6 30 31 18 17 4 5 .075 (1.91) TYP 29 28 3 2 G A1 16 15 1 .0375 (0.95) TYP .075 (1.91) TYP .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) .003 M A M 1.160 (29.46 H 1.800 (45.72) .900 (22.86) .125 ± .003 (3.18 ±0.08) 2x A5 A4 A3 A2 A1 .003 M A M .236 (5.99) 4x © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 5x) .003 M A M Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-13 Rev. 04-July-2009 E-Mail: [email protected] INDEX H-5p5 F 41 40 43 42 44 E 1 .472 (11.99) .900 (22.86) C D .050 (1.27) TYP .075 (1.91) TYP .003 M A M .003 M A M h-36p2 3 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 22x) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x) .075 (1.91) TYP B PCB Connectors A Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors Insert Arr. 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page 1.800 (45.72) .900 (22.86) 66 65 64 B H-66 .125 ± .003 (3.18 ±0.08) 2x 49 48 .003 M A M 33 32 63 62 47 46 31 16 15 30 61 45 44 43 58 42 27 26 29 28 57 41 56 .0375 (0.95) TYP C 20 19 3 4 5 6 35 34 37 36 23 22 21 7 8 9 .075 (1.91) TYP 51 50 53 52 55 54 39 38 40 25 24 11 10 12 14 13 60 59 18 17 2 1 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 66x) .075 (1.91) TYP .003 M A M 1.615 (41.02) J-17P4 D .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x 13 A4 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .3725 (9.46) .8075 (20.51) .003 M A M 12 11 10 8 9 A3 A1 A2 .003 M A M 7 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) 3 4 5 6 2 .0375 (0.95) TYP 1 .075 (1.91) TYP .175 (4.45) TYP .003 M A M 1.615 (41.02) E .5475 (13.91) .8075 (20.51) .075 (1.91) TYP J-25P2 .094 ± .003 (2.39 ±0.08) 2x 23 22 21 19 16 15 18 17 14 13 A2 A1 .003 M A M 12 11 10 8 9 7 3 4 5 6 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) F 20 2 1 .075 (1.91) TYP .0375 (0.95) TYP .003 M A M .003 M A M (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) 1.615 (41.02) .8075 (20.51) G .003 M A M .075 (1.91) TYP J-33 .094 ± .003 (2.39 ±0.08) 2x 33 .003 M A M 17 32 31 30 16 15 29 14 13 12 28 27 26 11 10 25 9 24 8 23 22 21 20 19 7 6 5 4 3 18 1 2 .075 (1.91) .0375 (0.95) TYP H 1.615 (41.02) .8075 (20.51) INDEX J-7P7 .094 ± .003 (2.39 ±0.08) 2x .003 M A M A7 A6 A5 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x) A4 A3 A2 A1 .175 (4.45) 6x .003 M A M © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-14 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors 790-036P AND 790-041P PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page Insert Arr. A 2.015 (51.18) K-27P4 .0375 (0.95) TYP .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x 23 22 21 A4 .003 M A M 20 19 16 15 17 18 A2 11 10 9 8 7 6 5 2 3 4 .003 M A M .003 M A M 14 13 A3 12 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) A1 1 .075 (1.91) TYP .5755 (14.62) .1.0075 (25.59) 2.015 (51.18) .094 ± .003 (2.39 ±0.08) 2x K-35P2 33 32 31 30 .175 (4.45) TYP C (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .1.0075 (25.59) .003 M A M .075 (1.91) TYP 29 28 27 26 25 24 23 22 21 20 19 18 A2 A1 .003 M A M 16 15 17 14 13 12 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 11 10 9 8 7 6 5 3 4 2 1 .075 (1.91) .0375 (0.95) TYP .003 M A M .750 (19.05) 2x 2.015 (51.18) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 43x) .0375 (0.95) TYP .075 (1.91) TYP .220 (5.59) K-43 .094 ± .003 (2.39 ±0.08) 2x 43 .003 M A M 42 22 21 41 40 20 19 39 38 18 17 37 36 16 15 35 34 33 14 13 12 32 31 30 11 10 9 28 29 8 7 27 26 25 24 6 5 3 4 23 2 .075 (1.91) TYP 2.015 (51.18) A8 A9 .003 M A M A7 F .003 M A M A5 A6 A4 E (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 9x) .1.0075 (25.59) .094 ± .003 (2.39 ±0.08) 2x D 1 .1.0075 (25.59) K-9P9 B A3 G A1 A2 .175 (4.45) H 2.036 (51.71) .428 (10.87) L-6P6 A6 A5 A4 A3 A2 A1 .003 M A M (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 6x) .236 (5.99) 5x © 2009 Glenair, Inc. .003 M A M Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-15 Rev. 04-July-2009 E-Mail: [email protected] INDEX .125 ± .003 (3.18 ±0.08) 2x