Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Strips with Solder Cups 171-001 Single Row Solder Cup MicroStrips These .050" pitch single row solder cup microstrips accept #26 to #30 gage wire with standard contacts and up to size #24 wire with "large bore" contacts. Contacts are factory-installed and potted. Available with 1 to 30 contacts. Optional stainless steel latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. 171-001-7PS-P1CL How To Order Solder Cup Microstrips Series Number of Cavities 171-001 -1 to -30 Total number of cavities including guide pins,latches and mounting holes. Single Row MicroStrip, .050" Contact Spacing, Solder Cup Contacts The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. Contact Gender and Solder Cup Size PS Pin Contacts, Size #26 Solder Cup Optional Guide Pin Omit For No Guide Pin -P1 Guide Pin in Cav. #1 Optional Latch Omit For No Latch CL Optional Mounting Holes Omit For No Mounting Holes MH Center Latch Mounting Holes BL The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are crossdrilled to allow for attachment to a mounting surface. NS Pin Contacts, Size #24 Solder Cup -PB Guide Pin at Both Ends Latch at Both Ends SS Socket Contacts, Size #26 Solder Cup -P(x) Replace (X) with guide pin location. P3 shown below: TS Socket Contacts, Size #24 Solder Cup Sample Part Number 171-001 -7 PS - P1 CL Q © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-4 www.glenair.com Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Solder Cup Strips 171-001 PIN CONNECTOR SOCKET CONNECTOR .200 (5.08) MAX .075 (1.91) TYP .075 (1.91) TYP 2Xø.062 (1.57) .050 (1.27) MAX C .200 (5.08) MAX .125 (3.18) .050 (1.27) MAX .300 (7.62) 2Xø.062 (1.57) .062 (1.57) .125 (3.18) C .110 (2.79) MAX .135/.116 (3.43/2.95) .075 (1.91) MAX .075 (1.91) .075 (1.91) (A) B .200 (5.08) REF .075 (1.91) (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) B Max. C In. mm. In. mm. In. mm. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) B Max. C In. mm. In. mm. In. mm. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 Center Latch Locations Even Number of Cavities Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2. © 2011 Glenair, Inc. U.S. CAGE Code 06324 CAVITY 1 Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-5 www.glenair.com Q